Audited Supplier
ultrafine grinder
Online Support, Video Technical Support
1 Year
Automatic
380V
Non-Customized
2~20mm
80~800mesh
50~1000kg/H
1 Set
Pin Mill
Grinding Wheel
Automatic
Contact Part SUS304/SUS316
Migreat
Wooden Cases
22kw
China
8479820090
Product Description
Product Application
The herbal powder milling equipment does not contain a sieve. It does not control the powder fineness by changing the mesh size. But the final powder fineness is controlled by the speed of the grading motor. The advantage of this is that even when processing oily or powdered sugar materials, it can ensure that the crusher chamber will not be blocked. And it can obtain finer powder. The powder fineness range is 100-500 mesh.
Working Method
The raw materials are manually or transported to the hopper of the fan. The hopper has a capacity of approximately 50L. The raw materials will be transported by screws into the crusher chamber and crushed into powder. The powder is separated by a guide ring. The powder that has reached fineness is discharged from the cyclone separation point. Powder that has not reached fineness will continue to be crushed. Ensure a final product yield of 98%. The main function of the fan is to suck out the powder inside the crusher chamber. During this processing, the machine is in a vacuum state inside.
Main advantages:
The herbal powder milling equipment can meet the requirements of both ordinary sieve pulverizers and ultrafine powders. The finest sieve crusher can only reach 120 mesh. And the ultrafine crusher can also thicken the powder by adjusting the speed of the grading motor. The fineness range is 80~500 mesh. And the ultrafine grinder can also crush spices, herbs, grains and other raw materials to over 200 mesh. This is impossible for crushers with screens. This is also one of the reasons for its high sales.
Grinding part
Include feed hopper, feeding motor, grading motor, grinding motor and grinding chamber.
The feeding speed can be control be inverter.
You can get different size of powder by adjusting grading speed. The faster the speed, the finer the fineness. The lower the speed, the coarser the fineness.
Fineness from 100-800mesh. No screen in the grinding chamber.
Include feed hopper, feeding motor, grading motor, grinding motor and grinding chamber.
The feeding speed can be control be inverter.
You can get different size of powder by adjusting grading speed. The faster the speed, the finer the fineness. The lower the speed, the coarser the fineness.
Fineness from 100-800mesh. No screen in the grinding chamber.
Cyclone discharge part:
Help to Separate dust from powder.Due to the action of the fan, the interior of the cyclone is in a vacuum state. The powder will be continuously discharged through the discharge motor. Some too fine powder will enter the dust collector box. Avoid dust entering the room. Meet GMP standards.
Help to Separate dust from powder.Due to the action of the fan, the interior of the cyclone is in a vacuum state. The powder will be continuously discharged through the discharge motor. Some too fine powder will enter the dust collector box. Avoid dust entering the room. Meet GMP standards.
Pulse dust collector box:
The dust removal box can collect dust. It contains a needle punched anti-static cloth bag. When the dust enters the dust removal box, it adsorbs on the surface without any surface. Then the pulse air hammer will automatically hit the bag and cause it to fall off. You can open the valve at the bottom of the box every day to clean it.
The dust removal box can collect dust. It contains a needle punched anti-static cloth bag. When the dust enters the dust removal box, it adsorbs on the surface without any surface. Then the pulse air hammer will automatically hit the bag and cause it to fall off. You can open the valve at the bottom of the box every day to clean it.
| Model | WFJ-15 | WFJ-20 | WFJ-30 | WFJ-60 | WFJ-80 | WFJ-100 |
| Capacity(kg/h) | 10-80 | 50-150 | 100-300 | 200-500 | 300-600 | 400-800 |
| Feed size(mm) | ≤6 | ≤10 | ≤12 | ≤15 | ≤15 | ≤20 |
| Crush size(mesh) | 80-400 | 80-400 | 80-800 | 80-800 | 80-800 | 80-800 |
| Total Motor(kw) | 20 | 29 | 46 | 76 | 95 | 124 |
| Main speed(rpm) | 4000 | 4000 | 3800 | 3200 | 2800 | 2000 |
| Dimensions (L*W*H mm) | 1400×1300×2000 | 6000×1250×2900 | 7100×1450×3200 | 8000x1800x4200 | 9000x1900x4300 | 10000x2000x4500 |
| Weight(kg) | 600 | 1200 | 1900 | 2500 | 2800 | 3200 |
Our company locates at Wuxi city, very near Shanghai City and it only takes 30 minutes to get to our city by train from Shanghai.
What equipment does your factory produce?
We are specialized in Grinder, Mixer, Granulator, Dryer, conveyor, Sifter, packing machine.etc
Are there airports and high-speed railway stations near your company?
There is Wuxi Shuofang International Airport near our factory. It is very convenient to travel to Guangzhou, Chengdu, and Beijing. If you are near Shanghai. I suggest you take the high-speed train to Wuxi Railway Station. Or call me directly (+13915200887) I will come to pick you up.
What's your shipping item process?
We ship according to the customer's cooperation terms. For example, EXW, FOB, CIF, DDP, etc.
What's the production cycle of your machine?
Machine can be completed in about 30-40 days after payment.
What's the payment term?
T/T, LC,
On L/C term, a 100% irrevocable L/C without soft clause can be accepted.Please seek the advice from the individual sales manager whom you work with.
