Audited Supplier
GW-23GL-ASC
Signal Repeater
Cable
Standard
With Lightning Protection
ISO, RoHS, CE
New
23dBm
75dB
800-1500sqm
Office,Basement, Hotel
Customized Frequency,Logo,Colors and Package
Cellphone Signal Repeater
31dB Gain Adjustable with DIP Switch,AGC,Alc;
Greetwin
Neutral Packing
CE, RoHS
Shenzhen
8543709200
Product Description
Double Band Signal Repeater 23dBm GSM 900MHz LTE 2600MHz 2g 3G 4G LTE Amplifier Cell Mobile Phone Signal Booster
A cell phone reception booster is generally a repeater system that involves the amplifier adding gain or power to the reception in various directions. Even for a cheap cell phone signal booster, maximum gain differs by application. The work of an outside antenna is to both receive and transmit signals to a cellular tower with enhanced power and sensitivity. Usually, the dB gain is never below 7 dB and can be over 10 dB gain. The system's elements conduit is the coaxial cable. It is also a factor in transmission loss.
Parameter:
A cell phone reception booster is generally a repeater system that involves the amplifier adding gain or power to the reception in various directions. Even for a cheap cell phone signal booster, maximum gain differs by application. The work of an outside antenna is to both receive and transmit signals to a cellular tower with enhanced power and sensitivity. Usually, the dB gain is never below 7 dB and can be over 10 dB gain. The system's elements conduit is the coaxial cable. It is also a factor in transmission loss.
Production Information
Parameter:
| Frequency Range | Uplink | Downlink | |||||
| GSM 900Mhz | 890-915Mhz | 935-960Mhz | |||||
| LTE 2600Mhz | 2500-2570MHz | 2620-2690MHz | |||||
| Gain | 70dB±2db | 75dB±2db | |||||
| Output Power | 20dBm±2dbm | 23dBm±2dbm | |||||
| Bandwidth | Wide Band | ||||||
| Manual Gain Control | 31dB | ||||||
| ALC | >25dB | ||||||
| Ripple in-band | ≤ 8dB | ||||||
| Return loss | ≤ -10dB | ||||||
| Noise Figure | ≤ 6dB | ||||||
| Spurious Emission &Intermodulation | 9KHz~1GHz | ≤ -36dBm | |||||
| 1~12.75GHz | ≤ -30dBm | ||||||
| Time Delay | ≤ 1.5 μs | ||||||
| Frequency stability | ≤ 0.01ppm | ||||||
| MTBF | > 50000 hours | ||||||
| Power Supply | AC100-240V,DC9V/5A | ||||||
| Power LED | Power indicator | ||||||
| Alarm LED | Red | Autoexcitation or High Power | |||||
| Green | Standard | ||||||
| Mechanical Specification | |||||||
| RF Connector | N-Female | ||||||
| Switch | Power Switch\Manual Gain Control Switch | ||||||
| Cooling | Heatsink Convection cooling | ||||||
| Impedance | 50 ohm | ||||||
| Humidity | < 90% | ||||||
| Operating Temperature | -10°C~55°C | ||||||
| Environment Conditions | IP40 | ||||||
| Size | 250mm*170mm*53mm | ||||||
| Weight | < 3.5Kg | ||||||
Features:
1. Cost-effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great cover.
Expansion and extension of the signal of the base station. Optimization of the quality of the signal and source
3. Cover about 800~1500m² Without block or obstruction.
4. High linear design, ALC function design, low interference to BTS.
5. Support any cellular devices (voice & data & video)
6. Wideband signal booster, or customize selective band booster.
7. Support System CDMA800, GSM, DCS, PCS, WCDMA, LTE 4G, etc
Advantages:
1. Smart Function, Intelligent mode setting
smart function called which can be activated via the front panel.
users can adjust gain and choose working band by LCD panel, This smart function is easier than DIP Switch, can set up parameters, It is a simple, safe, and effective way.
2. Auto Level Control
The 30dB ALC is used to maintain steady output power even when the donor source signal fluctuates.
Standard Package:
1) AC90-264V, DC9V/5A power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS
Recommended Accessories:
1) Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2) Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3) 5D-FB coaxial cable with connecter (Cable length optional)
Method of Installation:
The booster is fixed onto the wall through expansion bolts.
A. Drill holes in the selected place and install expansion bolts.
B. Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
C. Place the booster on and fasten it.
D. Connect cables and power cables to the booster respectively.
E. After installing the booster as described above, power on the booster to check the operation status.
Connection:
A. BTS Port: donor antenna cable is connected with Outdoor Port;
B. MS Port: service whip antenna is connected with Indoor Port;
C. DC IN connected with Power adaptor.
Q1.Payment Method
T/T, Western Union, Paypal, and Credit Card are available,
and we suggest paying by Alibaba Trade Assurance, the most favor, and security method.
*Other methods please Contact us with more details.
Q2.Delivery Date&Lead Time
| Quantity | Lead time | Delivery to American/Middle East/Asia/Europe |
| <20 pcs | 3-5 business days | 3-7 business days by DHL 5-7 business days by FedEx/UPS |
| 20-100 pcs | 7-15 business days | |
| >100 pcs | 15-24 business days |
Q3. Can I customize frequencies?
Yes, we can customize 2G/3G/4G/5G/GSM/CDMA/DCS/AWS/PCS/WCDMA/LTE,etc.
Q4. What should I do if I don't know about frequency in my country?
Please feel free to Contact us with your inquiry, we will find the frequency you need and address your problems.
More signal repeater please CLICK it!
360° Full View of Factory Evaluation
