Audited Supplier
Water Cooling
Automatic
AC
Friction Welding
Drill Rod
Hydraulic
Alternating Current
Drill Rod, Drill Pipe
xinchang
Drill Rod Welding Machine
drill rod welding machine
8515809090
Product Description
Automatic Direct Drive Welding Equipment Friction Welding Machine
The Friction welding is a method of press welding, using the heat which is from the roatation of workpiece to make the ends to be thermoplastic status, then quickly upset to finish welding. we are professional friction welding machine plant for years, are producing many different model machines from 10ton-125tons machines. Welcome your inquiry, we will provide you the details, also we make the automatic loading and unloading machine and manual operation machine, it is up to your needs.
Main advantages:
1. Use 8 sets top quality Angular contact bearing, it can bear bigger axial force, so lower failure rate and longer lifespan, NOT using plane bearings similar with others.
2. The movable fixtures is stuck the Tin bronze, extremely enhance the wear-resisting, higher precision.
3. Piston rod guide sleeve often is cast iron, but we use non-oil bearings to guide, better
4. Linear slide rail is often single guidance groove, we use double guidance groove rail, extremely enhance anti-torque, so lifespan is higher than similar ones.
Main advantages:
1. Use 8 sets top quality Angular contact bearing, it can bear bigger axial force, so lower failure rate and longer lifespan, NOT using plane bearings similar with others.
2. The movable fixtures is stuck the Tin bronze, extremely enhance the wear-resisting, higher precision.
3. Piston rod guide sleeve often is cast iron, but we use non-oil bearings to guide, better
4. Linear slide rail is often single guidance groove, we use double guidance groove rail, extremely enhance anti-torque, so lifespan is higher than similar ones.
| Model | Maximum upset force (kilonewton) | Maximum spindle speed (rpm) | Welding piece diameter (medium carbon steel) mm | Rotating fixture (clamping length) mm | Mobile fixture (clamping length) mm | Slip fit Maximum stroke mm | Total power (KW) | Productivity (piece/hour) | Overall dimensions | weight ton | Remarks |
| Z2.5 | 25 | 3000 | 4-14 | 50-200 | 50-420 | 200 | 12 | 100-320 | 2200*195*1250 | 2.8 | Small shaft and tube parts, etc |
| Z4 | 40 | 2500 | 6-16 | 50-200 | 50-420 | 200 | 15 | 100-250 | 2200*195*1250 | 3.2 | Small shaft and tube parts, etc |
| Z4Z | 40 | 600 | 6-16 | 50-150 | 50-150 | 200 | 15 | 100-300 | 2200*195*1250 | 3 | Copper aluminum dedicated |
| Z10 | 100 | 2200 | 8-22 | 50-200 | 50-420 | 200 | 15 | 100-220 | 2200*195*1250 | 3.5 | Small shaft and tube parts, etc |
| Z15 | 150 | 2000 | 10-30 | 50-250 | 50-700 | 310 | 25 | 100-220 | 3000*2800*1450 | 4.5 | Medium sized shaft and tube parts, etc |
| Z20 | 200 | 1800 | 10-30 | 50-250 | 50-700 | 310 | 28.5 | 100-200 | 3000*2800*1450 | 5 | Medium sized shaft and tube parts, etc |
| Z20Z | 200 | 450 | 12-40 | 50-200 | 50-180 | 310 | 28.5 | 100-200 | 3000*2800*1450 | 4.8 | Copper aluminum dedicated |
| Z20L | 200 | 1800 | 12-35 | 50-250 | 50-no limit | 310 | 28.5 | 100-150 | 3000*2800*1450 | 5.5 | Long shaft parts and tube parts, etc |
| Z25 | 250 | 1800 | 12-40 | 50-250 | 60-700 | 310 | 32 | 100-180 | 3000*2800*1450 | 5.5 | Medium sized shaft and tube parts, etc |
| Z25Z | 250 | 450 | 14-45 | 50-200 | 50-180 | 310 | 32 | 100-180 | 3000*2800*1450 | 5.3 | Copper aluminum dedicated |
| Z25L | 250 | 1800 | 14-40 | 50-250 | 60-no limit | 310 | 32 | 100-120 | 3000*2800*1450 | 5.8 | Long shaft parts and tube parts, etc |
| Z30 | 320 | 1450 | 14-45 | 50-300 | 70-800 | 320 | 40 | 100-150 | 3400*2900*1500 | 6.5 | Medium sized shaft and tube parts, etc |
| Z30Z | 320 | 380 | 16-50 | 50-200 | 70-200 | 320 | 40 | 100-120 | 3400*2900*1500 | 6.2 | Copper aluminum dedicated |
| Z30L | 320 | 1450 | 16-45 | 50-300 | 70-no limit | 320 | 47 | 50-100 | 3400*2900*1500 | 6.8 | Long shaft parts and tube parts, etc |
| Z30A | 150 | 700 | 16-55 | 50-300 | 70-no limit | 320 | 47 | 50-150 | 3400*2900*1500 | 6.5 | Special for bearing shells |
| Z50A | 500 | 1200 | 16-55 | 100-380 | 250-1400 | 400 | 92.75 | 20-80 | 5500*2800*2200 | 16.5 | Welding of pipe and shaft parts |
| Z63A | 630 | 1000 | 35-63 | 100-380 | 250-1400 | 400 | 112.75 | 20-60 | 5500*2800*2200 | 16.5 | Welding of pipe and shaft parts |
| Z80A | 800 | 1000 | 40-75 | 100-380 | 250-1400 | 400 | 112.75 | 20-60 | 5500*2800*2200 | 17 | Welding of pipe and shaft parts |
We, Ningbo Xin Chang Machinery Co.,Ltd are a professional designer and manufacturer in friction welding machine, resistance welding machine and Heat exchanger equipment. Our factory is in this line more than 20 years, we have more than 10 senior mechanical and electrical specialists and total more than 200 staff, our machine is famous in China. We have CCC, ISO9001 and CE certificates.
Over the years, we have exported so many machines to 30 and more countries, such as France,Spain,Poland,Russia,Indonesia,Vietnam,Pakistan,India,Mexico,Egypt etc.
Our main products are Heat exchanger equipment, Friction welding machine, spot welding machine, projection welding machine, butt welding machine, seam welding machine, multi head welding machine for wire mesh, and other various special welding machine for metal connection in different industries.
We always adhere to the management idea of "Integrity, profession, innovation, and win-win", to make Xin Chang becomes trustworthy enterprise of customers. Good product quality, perfect after-sales service, and professional technical support make customers choose no regrets and worry-free use.
1.Q: What about your standard delivery date ? A: Usually 30-60 working days. Our company provide just-in-time delivery
2.Q: How can you guarantee quality?
A: You could test samples before order,and we have professional QC and precise machining equipment; Always final Inspection before shipment;
3.Q: How long is the guarantee?
A: For one year after the custumer received the machine.
4.Q: What do we need to do if the machine fails?
A: In the guarantee time (1 year),we will send the spare parts to you for free,and provide the technical consultant for any time.
5.Q: Can I make my own design and logo on the product?
A: Yes, we do OEM.Welcome global partners.
6.Q: what is the packing mode?
A: wooden case or FCL with container.
7.Q: what is your after-sell service?
A: After-Sales
1) Training your workers how to install the machine, how to use the machine.
2) Engineers available to service machinery overseas
3) 1-year guarantee ( free maintain in a year)
4) Replacement parts and other accessories provided
