Audited Supplier
ZD800
Pre Milling, Gluing, Edge Banding, End Trimming, Rough Trimming, Fine Trimming, Contour Tracking, Scraping, Buffing
Linear Edge Banding Machine
0.4-3mm
Automatic
13m/min
CE, ISO
10-60mm
100mm
50mm
Customized
0.7MPa
14.13kw
Qingdao
PLC
Automatic
QDZD
Wooden Box
6000*900*1500mm
China
84659900
Product Description
Full Automatic Edge Banding Machine 8 functions, pre-milling and corner trimming ZD800
Different Model with different function
Technical Parameters of ZD800
Company Introduction
Qingdao Zhongding Machinery Co., Ltd is a leading company of specializing in manufacturing and exporting woodworking machine for more than 20 years. We perform a variety of services to not only supply our clients with top quality woodworking machinery but also adequate maintenance, spare parts and technical advice.
Our products mainly include Precise Panel Saw, Edge Banding Machine, Multiple Drilling Machine, Press Machine etc., which have been exported to lots of countries and regions, such as Europe, Russia, Southeast Asia, Middle East, North America, and Australia.
We have established complete sales system.Our company has got ISO9001 international system certificate and CE security certificate.
Feature:
Customer Visiting:
Our Certificate:
Package&Delivery
PACKAGE:
LCL SHIPMENT: Use plastic foam protect ,then ply wooden case package.
FCL: If the equipment enough package with 20"or 40" container ,will use plastic foam package and wooden pallet.
SHIPPING TERMS:
1. We can arrange the shipping by sea, by air , by truck and train based on your requirements, but kindly remind the oil can't allowed by ship, so you must filling them when machine arrive.
2. FOB,CNF,CIF,DDU can be accepted.
3. Any port of CHINA we can sent ,if you have other goods will packaged in one container , we would like to arrange that for you.
Full Automatic edge banding machine ZD800 has 8 Functions :
Pre-milling,Gluing ,End trimming,Rough trimming,Fine trimming,Corner rounding, Scraping,Buffing.
Different Model with different function
Technical Parameters of ZD800
| Working pressure | Total power | Feeding speed | Panel thickness | Panel length | Panel width | Edge thickness | Overall size |
| 0.7MPa | 14.13kw | 13m/min | 10-60mm | Min. 100mm | Min. 50mm | 0.4-3mm | 6000*900*1500mm |
Company Introduction
Qingdao Zhongding Machinery Co., Ltd is a leading company of specializing in manufacturing and exporting woodworking machine for more than 20 years. We perform a variety of services to not only supply our clients with top quality woodworking machinery but also adequate maintenance, spare parts and technical advice.
Our products mainly include Precise Panel Saw, Edge Banding Machine, Multiple Drilling Machine, Press Machine etc., which have been exported to lots of countries and regions, such as Europe, Russia, Southeast Asia, Middle East, North America, and Australia.
We have established complete sales system.Our company has got ISO9001 international system certificate and CE security certificate.
Feature:
 | Pre-milling The pre-milling system corrects the plate-type workpiece before pressing the film. The pre-milling device uses double milling cutters to modify the ripple marks caused by the cutting board saw processing to achieve a better edge banding effect. |
 | Gluing The glue pot adopts imported special ball bearing and high hardness and super wear-resistant material glue box, the glue lifting shaft is patented design, CNC processing, to ensure the glue output, uniform daub, the glue surface hit 99.999%, the glue thickness can be controlled at will. |
 | End trimming The end trimming system is used to cut off the cutting components of the front and rear edge tape. The end trimming device moves through precise linear guides, adopts automatic profiling and high-frequency electrode rapid cutting mechanisms to ensure that the cut surface is flat and smooth. |
 | Rough&Fine trimming Rough and fine trimming devices are used for trimming and processing the excess edge banding material on the upper and lower parts of the sheet edge banding. It adopts the structure of automatic profiling and high-frequency high-speed motor, etc. To ensure the smoothness of the upper and lower parts of the trimmed board edge. |
 | Scraping The scrapping is used to eliminate the ripple marks caused by the cutting process of the non-linear motion of the trimming, so that the upper and lower parts of the sapwood are smoother and cleaner, and the edges are scraped. Updated scraping mechanism with bigger unit and big copy wheel and V shape blade to get better effect. Buffing/Polishing The buffing component polishes the edge and removes the sol residue on the workpiece. The polishing device uses a cotton polishing wheel to clean the processed plate. The edge-sealing end surface is smoother through polishing. The polishing component used for the upper surface of the workpiece is fixed on workpiece. |
 | Corner Rounding Corner rounding mechanism with two high precision tracking motors to ensure high tracking speed and high trimming speed. The profile tracking system component is used to match the sun coated film to the jade star on the workpiece during the transportation process and cut (outline) the edges and corners.It can make the end surface of the table more smooth and beautiful. |
Customer Visiting:
Our Certificate:
Package&Delivery
PACKAGE:
LCL SHIPMENT: Use plastic foam protect ,then ply wooden case package.
FCL: If the equipment enough package with 20"or 40" container ,will use plastic foam package and wooden pallet.
SHIPPING TERMS:
1. We can arrange the shipping by sea, by air , by truck and train based on your requirements, but kindly remind the oil can't allowed by ship, so you must filling them when machine arrive.
2. FOB,CNF,CIF,DDU can be accepted.
3. Any port of CHINA we can sent ,if you have other goods will packaged in one container , we would like to arrange that for you.
