Audited Supplier
BF-2000E-1
Twin-Gear Juicer
Squeezing Mode
Stainless Steel
Customized
40-80mm
400*330*750mm
43kg
BF
Wooden Case
400*330*750mm
Henan, China
Product Description
Introduce Of Orange Lemon Tangerine Press Fruit Pomegranate Juicer
This BF-2000E series juicer is used to extract the juice of orange,lemon apple and so on.the part threat contact with the orange is made of stainless steel, it is widely used in hotel,restaurant,bar,shopping center,food place,training center,fruit shop and scenic sports,etc.easy operating,and very durable.
Technical parameters:
Features:
The orange press consists of a stainless steel casing, a stainless steel mask, plastic working parts (concave and convex balls), and a residue collection barrel. The structure is compact and reasonable, and has the advantages of no rust and easy cleaning. The fresh orange juicer adopts the concave-convex ball extrusion type, which can squeeze oranges of Ф40~Ф80mm (lemons and tangerine fruits are acceptable). It produces fresh, delicious orange juice after working for a few seconds, ready to drink, with the original taste. It is the most popular juicer for beverages. The juicer is suitable for beverage shops, various hotels, fruit shops, hotels, bars, coffee shops, leisure and entertainment places, etc., and has many uses. It is also suitable for use in offices, schools and other places. With the improvement of people's concept of food consumption, freshly squeezed juice will replace carbonated beverages as people's main beverages. It is an irreplaceable machine for the progress of human life.
Dismantling and washing steps:
1. Before the juicer is operated
1. There must be a safety grounding system when using the power supply, and the cable of the machine must not be replaced by yourself.
2. Check whether the components are installed well, especially whether the mask is installed in place (the micro switch in the red circle as shown in the figure needs to be pressed tightly), otherwise it is difficult to start the device.
The operation process of the juicer
Before juicing, clean the oranges and put them in the fruit basket for preparation. After the machine is turned on, the squeezed material can be continuously fed into the feeding port. After the juice is out, fresh orange juice will flow out, and the residue will be automatically separated into the residue collection bucket.
3. Disassembly and cleaning of the juicer after use
If the machine needs to be thoroughly cleaned after use, you must cut off the power supply (unplug the plug), open the mask, remove the blade, peeler and bump ball for thorough cleaning, and then reinstall the above components in reverse order before restarting.
Factory:
This BF-2000E series juicer is used to extract the juice of orange,lemon apple and so on.the part threat contact with the orange is made of stainless steel, it is widely used in hotel,restaurant,bar,shopping center,food place,training center,fruit shop and scenic sports,etc.easy operating,and very durable.
Technical parameters:| Model | Power | Motor | Diameter of fruit | Capacity | Juice rate | Size of machine | Weight of machine | Packing size |
| BF-2000E-1 | 220V/50HZ,110/60HZ | 120w | 40-80mm | 20 lemons/min | 40%-50% | 400*330*750mm | 43kg | 500x500x1000mm |
The orange press consists of a stainless steel casing, a stainless steel mask, plastic working parts (concave and convex balls), and a residue collection barrel. The structure is compact and reasonable, and has the advantages of no rust and easy cleaning. The fresh orange juicer adopts the concave-convex ball extrusion type, which can squeeze oranges of Ф40~Ф80mm (lemons and tangerine fruits are acceptable). It produces fresh, delicious orange juice after working for a few seconds, ready to drink, with the original taste. It is the most popular juicer for beverages. The juicer is suitable for beverage shops, various hotels, fruit shops, hotels, bars, coffee shops, leisure and entertainment places, etc., and has many uses. It is also suitable for use in offices, schools and other places. With the improvement of people's concept of food consumption, freshly squeezed juice will replace carbonated beverages as people's main beverages. It is an irreplaceable machine for the progress of human life.
Dismantling and washing steps:
1. Before the juicer is operated
1. There must be a safety grounding system when using the power supply, and the cable of the machine must not be replaced by yourself.
2. Check whether the components are installed well, especially whether the mask is installed in place (the micro switch in the red circle as shown in the figure needs to be pressed tightly), otherwise it is difficult to start the device.
The operation process of the juicer
Before juicing, clean the oranges and put them in the fruit basket for preparation. After the machine is turned on, the squeezed material can be continuously fed into the feeding port. After the juice is out, fresh orange juice will flow out, and the residue will be automatically separated into the residue collection bucket.
3. Disassembly and cleaning of the juicer after use
If the machine needs to be thoroughly cleaned after use, you must cut off the power supply (unplug the plug), open the mask, remove the blade, peeler and bump ball for thorough cleaning, and then reinstall the above components in reverse order before restarting.
Factory:
