Audited Supplier
ISG65-160(I)A
1 Year
One Year
10-30m
<50 L/min
Motor
Single-Stage Pump
High Pressure Pump
Single Suction Pump
Vertical Pump
Horizontal Split Pumps
Since Irrigation Centrifugal Pumps
Closed
Pump
Electric
15~ 60HP
15-30 Feet
DN150
11~ 45kw
ONEREEL
Wooden Box
Nylon, Stainless, Aluminum
China
Product Description
Automatic Electric Pump TD150 50HZ Vertical Single Stage Inline Circulating Centrifugal Water Pump
Techincal data
Packaging & Transportation
Authoritative Certificate
Single-stage single-suction vertical centrifugal Inline pump (ISG type)is a high-effective energy-saving product successfully designed by means of adopting the property data of IS model centrifugal Inline pump and strictly in accordance with ISO2858 world standard and Chinese national standard JB/T53058-93
ISG Inline Pump Features:
1. Compact structure, small volume, beautiful outlook. The lower barycenter of the vertical structure which co-incides with the center of the pump feet strengthens the stability of running and the duration.
2. Impeller directly mounted on the extended shaft of the motor, short axial dimension, reasonable configuration of pump and motor.
2. Easy to mount. Because of the same sizes of both inlet and outlet which also locate on the same central line, the pump can be directly mounted on any part of the pipeline just as a valve. (Inline pump type) The motor is covered with a rain-proof cap so that operation can be done outdoors.
3. Stable running, lownoise, high concentricity of components. Bearings of low noise are used for the motor, the impellers are of best dynamic and static balance, novibration at running.
4. No leakage. The shaft is mechaically sealed with carbide alloy wearable material, extending the duration
5. Easy to maintain. Not necessary to remove thepipeline for check-out and maintenance, only to take out the nuts on the pump lid, the motor and the driving components.
1. Compact structure, small volume, beautiful outlook. The lower barycenter of the vertical structure which co-incides with the center of the pump feet strengthens the stability of running and the duration.
2. Impeller directly mounted on the extended shaft of the motor, short axial dimension, reasonable configuration of pump and motor.
2. Easy to mount. Because of the same sizes of both inlet and outlet which also locate on the same central line, the pump can be directly mounted on any part of the pipeline just as a valve. (Inline pump type) The motor is covered with a rain-proof cap so that operation can be done outdoors.
3. Stable running, lownoise, high concentricity of components. Bearings of low noise are used for the motor, the impellers are of best dynamic and static balance, novibration at running.
4. No leakage. The shaft is mechaically sealed with carbide alloy wearable material, extending the duration
5. Easy to maintain. Not necessary to remove thepipeline for check-out and maintenance, only to take out the nuts on the pump lid, the motor and the driving components.
ISG Inline Pump Usage:
1. ISG series vertical centrifugal Inline pump is used to transport clean water and other liquids, the physical propertiesof which are similar to those of clean water, in industrial and cities'water supply and drainage, high buildings' booster water supply, gardens irrigation, fire-fighting booster, remote water supply, warming systems, circular booster of cold&hot water in bath rooms as well as in competions of equipments, the operation medium temperature is below 100.
2. ISRG series vertical hot-water Inline pump is used for hot-water, the operation temperature is below 200.
3. IHG series vertical chemical Inline pump is used for corrosive, the material is SS304, SS316, SS316L
4. ISGD is for the low speed type, 1450 rpm
For detailed complete information, please contact us freely.
1. ISG series vertical centrifugal Inline pump is used to transport clean water and other liquids, the physical propertiesof which are similar to those of clean water, in industrial and cities'water supply and drainage, high buildings' booster water supply, gardens irrigation, fire-fighting booster, remote water supply, warming systems, circular booster of cold&hot water in bath rooms as well as in competions of equipments, the operation medium temperature is below 100.
2. ISRG series vertical hot-water Inline pump is used for hot-water, the operation temperature is below 200.
3. IHG series vertical chemical Inline pump is used for corrosive, the material is SS304, SS316, SS316L
4. ISGD is for the low speed type, 1450 rpm
For detailed complete information, please contact us freely.
Techincal data
| Type | Flow: Q | Head m | Efficiency % | Speed r/min | Power KW | NPSH m | |
| m 3 /h | l/s | ||||||
| 65-125(I)A | 45 | 12.5 | 16 | 71 | 2900 | 4 | 3.0 |
| 65-160(I) | 50 | 13.9 | 32 | 71 | 2900 | 7.5 | 3.0 |
| 65-160(I)A | 46.7 | 13.0 | 28 | 70 | 2900 | 7.5 | 3.0 |
| 65-160(I)B | 43.3 | 12.0 | 24 | 69 | 2900 | 5.5 | 3.0 |
| 65-200(I) | 50 | 13.9 | 50 | 67 | 2900 | 15 | 3.0 |
| 65-200(I)A | 47 | 13.1 | 44 | 66 | 2900 | 11 | 3.0 |
| 65-200(I)B | 43.5 | 12.1 | 38 | 65 | 2900 | 7.5 | 3.0 |
| 65-250(I) | 50 | 13.9 | 80 | 59 | 2900 | 22 | 3.0 |
| 65-250(I)A | 46.7 | 13.0 | 70 | 59 | 2900 | 18.5 | 3.0 |
| 65-250(I)B | 43.3 | 12.0 | 60 | 58 | 2900 | 15 | 3.0 |
| 65-315(I) | 50 | 13.9 | 125 | 54 | 2900 | 37 | 3.0 |
| 65-315(I)A | 46.5 | 12.9 | 110 | 54 | 2900 | 30 | 3.0 |
| 65-315(I)B | 44.5 | 12.4 | 100 | 53 | 2900 | 30 | 3.0 |
| 65-315(I)C | 41 | 11.4 | 85 | 51 | 2900 | 22 | 3.0 |
| 80-100 | 50 | 13.9 | 12.5 | 73 | 2900 | 3 | 3.0 |
| 80-100A | 44.7 | 12.5 | 10 | 72 | 2900 | 2.2 | 3.0 |
| 80-125 | 50 | 13.9 | 20 | 72.5 | 2900 | 5.5 | 3.0 |
| 80-125A | 45 | 12.5 | 16 | 71 | 2900 | 4 | 3.0 |
| 80-160 | 50 | 13.9 | 32 | 71 | 2900 | 7.5 | 3.0 |
| 80-160A | 46.7 | 13.0 | 28 | 70 | 2900 | 7.5 | 3.0 |
| 80-160B | 43.3 | 12.0 | 24 | 69 | 2900 | 5.5 | 3.0 |
| 80-200 | 50 | 13.9 | 50 | 67 | 2900 | 15 | 3.0 |
| 80-200A | 47 | 13.1 | 44 | 66 | 2900 | 11 | 3.0 |
| 80-200B | 43.5 | 12.1 | 38 | 65 | 2900 | 7.5 | 3.0 |
| 80-250 | 50 | 13.9 | 80 | 59 | 2900 | 22 | 3.0 |
| 80-250A | 46.7 | 13.0 | 70 | 59 | 2900 | 18.5 | 3.0 |
| 80-250B | 43.3 | 12.0 | 60 | 58 | 2900 | 15 | 3.0 |
| 80-315 | 50 | 13.9 | 125 | 54 | 2900 | 37 | 3.0 |
| 80-315A | 46.5 | 12.9 | 110 | 54 | 2900 | 30 | 3.0 |
| 80-315B | 44.5 | 12.4 | 100 | 53 | 2900 | 30 | 3.0 |
| 80-315C | 41 | 11.4 | 85 | 51 | 2900 | 22 | 3.0 |
| 80-350 | 50 | 13.9 | 150 | 66 | 2900 | 55 | 3.0 |
| 80-350A | 44.5 | 12.4 | 142 | 65 | 2900 | 45 | 3.0 |
| 80-350B | 41 | 11.4 | 135 | 62 | 2900 | 37 | 3.0 |
| 80-100(I) | 100 | 27.8 | 12.5 | 76 | 2900 | 5.5 | 4.5 |
| 80-100(I)A | 89 | 24.7 | 10 | 74 | 2900 | 4 | 4.5 |
| 80-125(I) | 100 | 27.8 | 20 | 76 | 2900 | 11 | 4.5 |
| 80-125(I)A | 89 | 24.7 | 16 | 74 | 2900 | 7.5 | 4.5 |
| 80-160(I) | 100 | 27.8 | 32 | 76 | 2900 | 15 | 4.5 |
| 80-160(I)A | 93.5 | 26.0 | 28 | 74 | 2900 | 11 | 4.5 |
ONEREEL is specialized in the design and manufacture Steel Spools, Plastic Spools, Cable roller, Yarn Bobbin, aluminum spool , Cable Reel Stand, Sheave Pulley, Cable Conveyor, Hydraulic Puller Tensioner, Gin Poles, Cable Pulling Winch, Safety Tools, Wire Grip, Plastic Parts, and Pump in the industry since 1991. All of our customer spool and wire carrier are engineered and manufactured in our 120,000 square foot state-of-the-art manufacturing plant located in Ningbo, Zhejiang.
ONEREEL is specialized in the manufacture of reels for cables and electric wires, iron axles, disc spool for steel cables and various delivery reels. With strong technological capabilities and full series of production equipment. All of our products go through the dynamic and static balance tests. We have passed the quality system certification ISO9001:2000 to ensure the product quality. Following the standards of GB4004-83, JB/T8997, DIN46395 and DIN46397 in productions.
Hot Product
Our Customer
Packaging & Transportation
Authoritative Certificate
FAQ
Q1: Can I get samples?
A: According to spool model and material, we will advise.
Q2: How long is the sample LEAD TIME?
A: For existing samples, it takes 2-3 days. If no stock, we will advise lead time.
Q3: Can you develop new products?
A: Yes, we have new products developing ability and we are good at developing new mold.
Q4: How much is the freight charge?
A: It depends on spool package volume, if small quantity, volume and urgent goods,
we may advise FEDEX or other couriers' charge for your check.
If volume bigger and by seaway suitable, we provide FOB or CIF price to you.
Q5: What format of the file do you need if I want my own design?
A: We have our own mound workshop and can provide spool or other plastic product developing and injection service.
Q6: How about your service?
A: We have pre-sale service, in-sale service and after-sale service. As "Customer First" is the most important principle of company operation.
A: According to spool model and material, we will advise.
Q2: How long is the sample LEAD TIME?
A: For existing samples, it takes 2-3 days. If no stock, we will advise lead time.
Q3: Can you develop new products?
A: Yes, we have new products developing ability and we are good at developing new mold.
Q4: How much is the freight charge?
A: It depends on spool package volume, if small quantity, volume and urgent goods,
we may advise FEDEX or other couriers' charge for your check.
If volume bigger and by seaway suitable, we provide FOB or CIF price to you.
Q5: What format of the file do you need if I want my own design?
A: We have our own mound workshop and can provide spool or other plastic product developing and injection service.
Q6: How about your service?
A: We have pre-sale service, in-sale service and after-sale service. As "Customer First" is the most important principle of company operation.
