Audited Supplier
Product Description
HS-ZBJ Machine working method is cutting paper roll material according to the length, and roll up a little from the beginning until the entire paper segment is rolled, in winding process, paper stick two sides ends keep flush, so it is also called the straight winding machine.
Our Advantages
1. Because machine is only coated one layer of glue on the paper stick outer circle, the hardness of the paper stick will be softer than paper stick of inclined winder machine made. So our machine paper sticks are used in cotton swab, perfume sticks, cakes, lollipops, shoe support and other products or industries.
2. Paper stick machine usually produce more than 3.0mm diameter or bigger sticks. (the paper stick above 3.0mm is a bit soft);
3. Adopt PLC touch screen interface, intuitive display and easy operation. With multiple sets of memorizing devices, there is no need to reset production when changing products.
4. The parts are welded, finished and specially treated to ensure good quality. The machine has stable performance and long service life.
5. The diameter of the paper rod can be changed through servo control.
| Paper Rod Diameter | 2.5-6mm | Paper Requirements | single glossy paper | |
| Paper Stick Length | 50-260mm (length can be customized) | Power Supply | 380V 50HZ | |
| Productivity | 400-1000pcs/min | Total Power | 4.5KW | |
| Paper Thickness | 60-100g/m² | Dimensions | 3200*900*2200mm | |
| Applicable Glue | Polyvinyl alcohol glue, starch glue | Weight | 2000KG | |
| Machine speed according to stick diameter, diameter is bigger as speed slower. | ||||
Product Sample
Paper Feeding Mechanism
The paper roll fixing mode is divided into two types:
built-in type and outer frame type according to the diameter of the paper roll.
Magnetic powder tension controller is a device to ensure that the paper has enough tension to ensure that the paper stick forming belt.
Paper Cutting Machanism
The paper cutting roller will automatically cut the formed paper stick according to the set length.
Note: The thickness of the paper determines the diameter of the paper stick, so you must tell the thickness of the paper before ordering.
The thickness of the regular paper: thin axis paper stick: φ1.4-2.0mm, 30-50 grams of paper is used (gram weight per square meter)
Thick-axis paper stick: φ2.0-3.0mm, use 50-70 grams of paper (gram weight per square meter)
Paper Stick Forming Mechanism
The rubber presses the cut shaped paper stick tightly on the shaping template and twist the paper stick into a predetermined diameter, the formed paper stick is sent out through the receiving conveyor belt
Gluing Mechanism
The glue coating wheel completes the glue application, and the amount of glue is adjusted and controlled by the glue motor.
Note: glue and making
Generally, polyvinyl alcohol powder is added to water to melt and can be adjusted into paper stick machine glue.
Making method: add one part of polyvinyl alcohol powder to two parts of water, stir evenly, heat to melt into syrup, then when using, you can take one part of the melted glue and add ten parts of water and mix it evenly, because polyvinyl alcohol is a kind of sugar,so the paper stick made belongs to the environmental protection paper stick, which can be used as lollipops and other foods.
The end cutting is completed by the matching machine, and the cutting knife is installed on the knife holder according to the required size of each manufacturer and then driven by the rubber wheel,rotate the paper stick and cut off both ends smoothly.
Conveyor Belt Feeding Mechanism
The paper sticks have been cut the end fall on the conveyor belt installed at the lower part, and are sent out to the box-shaped platform smoothly, waiting to be collected.
Machine Details
Electrical & Pneumatic Parts List
| 1 | Touch Panel | Siemens:Smart700IE V3 |
| 2 | PLC | Siemens:Smart SR20 |
| 3 | Inverter | Siemens:v20,3Kw |
| 4 | Circuit Breaker | Eaton:E6-32/3/C |
| 5 | Contactor | Eaton:XTCG018C00DT |
| 6 | Relay | Phoenix:RXM2LB2BD |
| 7 | Switching Power Source | MEAN WELL:A22-STOP/K10 |
| 8 | Proximity Switch | Bedook:PRE12-2DN |
Packing & Delivery
Our Team
Certification
FAQ
1. Q: How To Order ?
A: Step 1, please tell us what model and quantity you need.
Step 2, then we will make a PI for you to confirm the order details.
Step 3, when we confirmed everything, such as sample sizes, drawings, moulds,etc.
Then you can arrange the payment, 30% T/T for ordering, 70% T/T before machine delivery.
Step 4, finally we deliver the machines within the delivery time.
2. Q: When will make delivery ?
A: Delivery Time
-Sample Order: 1-3 days after receipt of the delivery charge.
-Stock Order: 3-7days after receipt of the full payment.
-OEM Order: 15-25days after receipt of the deposit.
3. After-sales Service
1 year warranty for all kinds of products;
If you find any defective accessories first time, we will give you the new partsfor free to replace in the next order,
as an experienced manufacturer, you can restassured of the quality and after-sales service.
4.Payment
T/T, L/C.
5. Transportation
Transported by DHL, UPS, EMS, Fedex,Air freight. sea freight.
