Audited Supplier
1.Uses
For one-time forming of all-steel radial truck tires.
2. Tire Type
R17.5-24.5
3. Capacity: 90 - 100 strips/shift
4. Controls
Mitsubishi Q series PLC, mobile CPU, CC-LINK fieldbus, and SSCENT servo system; can also use Siemens, AB, Rexroth, or other PLC and bus form, depending on customer's needs.
5. Main Features and Technical Parameters
Molding drum: mechanical down assembly, servo motor control.
Tire casing drum: servo motor control, accurate, stable speed, position, vacuum absorb.
Belt drum: servo motor control.
Tire casing transfer ring: servo motor drive, linear guide positioning, synchronous belt transmission.
Belt transfer ring: servo motor drive, ball screw transmission.
Feed frame: various, consisting of relevant unwinding, centering device, automatic length set, cutting and fitting device.
The machine is mainly used for mixing and plasticating of rubber and plastic. Different type of rotors can satisfy the mixing technical requirement. Control system is adoped with PLC system. It has convenient operation, strong anti-interference ability, and safe and reliable signal detection and feedback functions, which can effectively control the quality of rubber mixing and ensure the normal operation of the equipment. In addition, it can be produced according to user's requirements.The machine is mainly used for mixing and plasticating of rubber and plastic. Different type of rotors can satisfy the mixing technical requirement. Control system is adoped with PLC system. It has convenient operation, strong anti-interference ability, and safe and reliable signal detection and feedback functions, which can effectively control the quality of rubber mixing and ensure the normal operation of the equipment. In addition, it can be produced according to user's requirements.The machine is mainly used for mixing and plasticating of rubber and plastic. Different type of rotors can satisfy the mixing technical requirement. Control system is adoped with PLC system. It has convenient operation, strong anti-interference ability, and safe and reliable signal detection and feedback functions, which can effectively control the quality of rubber mixing and ensure the normal operation of the equipment. In addition, it can be produced according to user's requirements.
The machine is mainly used for mixing and plasticating of rubber and plastic. Different type of rotors can satisfy the mixing technical requirement. Control system is adoped with PLC system. It has convenient operation, strong anti-interference ability, and safe and reliable signal detection and feedback functions, which can effectively control the quality of rubber mixing and ensure the normal operation of the equipment. In addition, it can be produced according to user's requirements.
Consumption of cooling water(m³/h)
~10~15~25~25
~35~45~50
~23~100~100~150
~150
Driving motor power(kw)
90110220220
280(315)
600720
280(315)
Type
X(S)M-25X(S)M-50X(S)M-80X(S)M-90
X(S)M-110X(S)M-160X(S)M-180
X(S)M-250X(S)M-270X(S)M-300X(S)M-370
X(S)M-420
Total volume of mixing chamber(L)
26.5()
2 wings
50()
2 wings
80()
2 wings
90()
Type | X(S)M-25 | X(S)M-50 | X(S)M-80 | X(S)M-90 | X(S)M-110 | X(S)M-160 | X(S)M-180 | X(S)M-250 | X(S)M-270 | X(S)M-300 | X(S)M-370 | X(S)M-420 | |
Total volume of mixing chamber(L) | 26.5() 2 wings | 50() 2 wings | 80() 2 wings | 90() 2 wings | 110() 2 wings | 147() 4 wings | 166() 4 wings | 253() 2 wings | 250() 4 wings | 280() 4 wings | 395() 4 wings | 425() 4 wings | |
Working volume of mixing chamber(L) | 20 | 37.5 | 60 | 67.5 | 82.5 | 110 | 124.5 | 140 | 188 | 210 | 296 | 319 | |
Speed of rear rotor(r/min) | 6-60 | 4-40 | 4-40 | 4-40 | 4-40 | 4-40 | 4-40 | 20() (Front rotor) | 4-40(6-60) | 4-40(6-60) | 6-60 | 6-60 | |
Speed ratio of rotors(r/min) | 1:1.15 | 1:1.15 | 1:1.15 | 1:1.15 | 1:1.15 | 1:1.16 | 1:1.16 | 1:1.16 | 1:1.17 or 1:1 | 1:1.17 or 1:1 | 1:1.15 or 1:1 | 1:1.15 or 1:1 | |
Pressure of compressed air(Mpa) | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | |
Consumption of compressed air(m³/h) | ~70 / Hydraulic | ~80/Hydraulic | ~100/Hydraulic | ~100/Hydraulic | ~230/Hydraulic | ~300/Hydraulic | ~300/Hydraulic | ~120/Hydraulic |
Hydralic ram |
Hydralic ram | Hydralic ram |
Hydralic ram | |
Pressure of cooling water(Mpa) | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | |
Consumption of cooling water(m³/h) | ~10 | ~15 | ~25 | ~25 | ~35 | ~45 | ~50 | ~23 | ~100 | ~100 | ~150 | ~150 | |
Driving motor power(kw) | 90 | 110 | 220 | 220 | 280(315) | 600 | 720 | 280(315) | 1250(1500) | 1250(1500) | 2500 | 2500 | |
Dimension(mm) | L | 4460 | 5560 | 5800 | 5800
| 6620 | 8000 | 8500 | 7100 | 8700 | 8700 | 10800 | 10800 |
| W | 3225 | 2510 | 2560 | 2560 | 2850 | 3330 | 3400 | 3905 | 4320 | 4320 | 4960 | 4960 | |
| H | 3200 | 3200 | 4200 | 4200 | 4400 | 5260 | 5350 | 4953 | 6160 | 6160 | 7040 | 7040 | |
() Weight(Except main motor)(t) | ~7 | ~14 | ~22 | ~22 | ~26 | ~36 | ~39 | ~35 | ~50 | ~54 | ~76 | ~76 | |
2 wings
110()
2 wings
147()
4 wings
166()
4 wings
253()
2 wings
250()
4 wings
280()
4 wings
395()
4 wings
425()4 wings
Working volume of mixing chamber(L)
2037.56067.5
82.5110124.5
140188210296
319
Speed of rear rotor(r/min)
6-60
4-40
4-404-40
4-404-404-40
20()
(Front rotor)
4-40(6-60)4-40(6-60)6-60
6-60
Speed ratio of rotors(r/min)
1:1.151:1.151:1.151:1.15
1:1.151:1.161:1.16
1:1.161:1.17 or 1:11:1.17 or 1:11:1.15 or 1:1
1:1.15 or 1:1
Pressure of compressed air(Mpa)
0.6-0.80.6-0.80.6-0.80.6-0.8
0.6-0.80.6-0.80.6-0.8
0.6-0.80.6-0.80.6-0.80.6-0.8
0.6-0.8
Consumption of compressed air(m³/h)
~70 / Hydraulic
~80/Hydraulic
~100/Hydraulic
~100/Hydraulic
~230/Hydraulic
~300/Hydraulic
~300/Hydraulic
~120/Hydraulic
Hydralic ram
Hydralic ram
Hydralic ram
Hydralic ram
Pressure of cooling water(Mpa)
0.3-0.40.3-0.40.3-0.40.3-0.4
0.3-0.40.3-0.40.3-0.4
0.3-0.40.3-0.40.3-0.40.3-0.4
0.3-0.4
Consumption of cooling water(m³/h)
~10~15~25~25
~35~45~50
~23~100~100~150
~150
Driving motor power(kw)
90110220220
280(315)
600720
280(315)
1250(1500)1250(1500)2500
2500
Dimension(mm)
L446055605800
5800
66208000
8500
71008700870010800
10800W3225251025602560
285033303400
3905432043204960
4960H3200320042004200
44005260
5350
4953616061607040
7040()
Weight(Except main motor)(t)
~7~14~22~22
~26~36~39
~35~50~54~76
~76
1250(1500)1250(1500)2500
2500
Dimension(mm)
L446055605800
5800
66208000
8500
71008700870010800
10800W3225251025602560
285033303400
3905432043204960
4960H3200320042004200
44005260
5350
4953616061607040
7040()
Weight(Except main motor)(t)
~7~14~22~22
~26~36~39
~35~50~54~76
~76