Audited Supplier
Model | GT 6/14S |
Working Capacity | Φ6-Φ14mm rod Φ6-Φ14mm rebar |
| Cut-off Length | 800mm-12000mm Could customized according to client's requirements |
| Working Speed | 85 m/min |
| Pulling Motor | 15KW-4P |
| Hydraulic Oil Pump Motor | 5.5KW-4P |
| Length accuracy | ±5 mm |
| Linearity | ±2 mm/m |
| Power Specification | 3 phase, 380V, 50Hz or Customized as Clients' Requirements. |
| Length adjust mode | Manual/Automatic |
| Control System | Auto. Control System (Manual System as backup) |
| Control Box | CNC Control Box |
| Product Collect Stacker | 12m or as clients need |
| Load capacity of Pay-off | 3 t |
| Net Weight | 1100KG |
| Gross Weight | ~1500KG |
| Dimensions | 2.9(L) x 0.8(W) x 1.1(H)m |
GT6-14S Steel Coil Wire Straightener and Cutter
GT Series High-Speed Steel Wire Straightening and Cutting Machine used for straightening and cutting 6-14mm hot-rolled and cold-rolled steel coil wire and deformed rebar. mostly used in steel mesh production plants, precast concrete component produce facotry, normal building project, construction, tunnel, bridge, dam, high-speed road, High-speed train and so on.
1. Decoiling Steel Wire from the coils.
2. Straightening Steel Wire (Keep linearity low than ±2 mm/m).
3. Cleaning the surface of steel wire (Brush the rust of steel wire).
4. Cutting straight rebar as preset length (Keep the length tolerance less than ±2 mm)
1. Suitable for straightening and cutting cold-rolled round bar/ribbed bar, and hot-rolled round/ribbed bar.
2. Intelligent control: Auto. Control System (Manual System as backup). Easy operation and working reliably
3. Low failure rate: Due to the fine processing of parts and strict quality control, after installation and debugging, under normal working conditions, it can maintain trouble-free operation for a long time.
4. World Advanced & Leading technology: Machine straightening and cutting technology
5. High working speeds.
6. High cutting accuracy: length tolerance: ≤ ±5mm
7. High straightness: ≤ 2 mm/m
1. Q:Do you have your own production factory?
A:Yes, we not only have our own factory,We also have a cooperative relationship with other factories in China
2. Q: Can you send us samples?
A: We are pleased to send you the sample to test the quality and market.
3. Q: About your products, could you do it OEM?
A: Yes, OEM service is available.
4. Q: Do you also provide spare parts ?
A: Once we confirm the models you'd like to order, we will send you the diagram for checking and also suggest you some
easy-broken parts.
5. How long is your machine warranty ?
A: One year(Artificial damage and incorrect use is not included),within warranty period ,we will offer free part and maintain
video, or ever can teach you face-to-face. if machine have serious quality problem ,we support to back .
6. Q: What's the delivery time?
A: It usually takes about 7-30 working days to produce one order.
7. Q: How is the payment terms?
A: Normally T/T 30% in advance and T/T 70% before shipment, other terms could be discussed and confirmed then.
8. Q: Can I mix different models in one container?
A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.
9. Q: How does your factory do regarding quality control?
A: We always pay great attention to quality control from the very beginning and every product was tested piece by piece before delivery.
10. Q: Do you have quality certification?
A: Yes, we have CE, SGS,ISO, ect.
