Audited Supplier
1.Features
2. Both the decoiler and straightener operate independently via separate electrical control boxes, each equipped with its own frequency converter, ensuring smooth operation and better protection against external distortions.
3. The straightener utilizes a universal joint drive and full gear drive, preventing material damage that could result from passive rotation of the upper rollers.
4. The straightening roller features a dial indicator for easy and quick leveling point identification.
5. The addition of a back roller improves the rigidity of the straightening rollers, further enhancing the straightening effect.
6. The integrated system boosts the machine's lifespan, providing long-term reliability.
Decoiler is for the metal coil(or other material )uncoiling to be straight and smooth ,then easily for the feeding to the machine like slitting,cut to length and roofing sheet,etc.It can be divided into manual decoiler and electric decoiler,hydraulic decoiler.The hydraulic decoiler whether has the loading car and the length of the guaiding is all customized.
| Model | GO-200B | GO-300B | GO-400B | GO-500B | GO-600B |
| Material width | 200mm | 300mm | 400mm | 500mm | 600mm |
| Material thickness | 0.1~1.8mm | ||||
| Coil weight | 800kg | 1000kg | 1500kg | 1500kg | 2000kg |
| Coil inner dia. | 450~530mm | ||||
| Coil outer dia. | 1200mm | ||||
| Straightener motor | 1/2hp | 1hp | 2hp | 2hp | 3hp |
| Decoiler motor | 1hp | 1hp | 2hp | 2hp | 3hp |
| Straightening roller | ø20*9/10(all gear drive) | ||||
| Straightener adjustment | Four points fine adjust | ||||
| Speed | 0~15m/min | ||||
| Expand type | Manual expansion | ||||
| Induction type | Touching type | ||||
1. Features a parallel roller design with a 3-over-4 roller configuration, totaling 7 rollers.
2. Utilizes a four-point fine adjustment system, making it ideal for high-precision processing. The independent four-point pressure adjustment controls the entrance and exit feeding rollers, effectively preventing material deviation and deformation.
3. The supporting roller is made of galvanized, non-powered material, ensuring a scratch-resistant and wear-resistant surface. It is crafted as a single solid piece and equipped with mechanical bearings for smooth and durable rotation.
4. The handwheel is cast iron with an electroplated surface, offering a traditional and reliable design.
5. The transmission section is fully enclosed with protective covers on both sides and includes an observation window for easy monitoring.
1. Manufactured from solid bearing steel with thick plating, heat-treated through medium-frequency hardening, ensuring a surface hardness of no less than HRC58 for enhanced durability.
2. Made from GCr15 forged round steel, undergoing preheating treatment (spheroidal annealing), followed by turning, milling, intermediate frequency heat treatment, rough grinding, cold stabilization, fine grinding, and electroplating. This process ensures high precision, concentricity, smoothness, hardness, and extends roller lifespan.
The gear manufacturing process includes:
- Initial blank processing → gear surface machining → heat treatment → surface finishing.
- Rough parts are forged and normalized to improve machinability and facilitate cutting.
- Semi-finishing includes turning, rolling, and gear shaping to form the basic gear structure.
- Heat treatment enhances mechanical properties.
- Final finishing aligns with design requirements, including profile finishing and precision adjustments.
After these processes, the gear achieves grade 6 precision, offering high wear resistance, superior strength, and an extended service life.
1. Integrates the decoiler and straightener into one unit, maximizing workspace efficiency.
2. The decoiler adopts a cantilever beam design, with all plates cut by high-precision laser plasma technology.
3. All components are processed using CNC and numerical control for excellent interchangeability.
4. The overall structure is designed for simplicity, making assembly and part replacement easy, reducing maintenance costs significantly.
1. Equipped with silver alloy relays, full copper coils, and a flame-retardant safety base, ensuring durability and longevity.
2. Features a safety protection adjustment circuit with a time-delay relay, silver alloy contacts, and support for various delay ranges.
3. The switch uses a sliding contact mechanism with a self-cleaning function. The normally open and normally closed contacts are independently bonded, allowing multi-pole operation. Additionally, an anti-rotation positioning system and secure mounting gasket prevent loosening.
4. The control buttons utilize a self-duplex flat design, offering light operation and moderate key travel. The modular structure and keto-base composite contact points ensure strong conductivity and high current capacity, with a lifespan of up to 1 million operations.
1. Uses a model 80 worm gear vertical reducer, which employs a gear-based speed conversion mechanism to regulate motor rotation speed and generate high torque.
2. The vertical motor is designed for low vibration and noise. Its stator and rotor feature pure copper coils, lasting 10 times longer than standard coils. Equipped with ball bearings on both ends, it reduces friction and maintains low operating temperatures.
(1)Turn on the power supply first check whether the power supply voltage is matched, whether there is a lack of phase contact, etc., so as not to damage the electrical motor.
(2)There should be a reliable grounding wire to prevent injury when the appliance is damaged.
(3)Immediately remove the handle of mandrel after loading the coil, it is avoid injury when runing.
(4)The power should be cut off during charging. After power-on, it is strictly forbidden to stand around the pallet.
Maintenance
(1)For long-term use, the spindle bearing grease should be added once a month, and the reducer oil should be replaced every six months, and the oil should be added to 1/3.
(2)The wiring points in the electric control box shall not be loose, so as to avoid burning the electrical appliances and affecting normal use, and no oil or water is allowed to enter.
(3)For long-term use, attention should be paid to checking the bearing housing and whether the screws are loose.
(4)If it is not used for a long time, add the oil to the spindle and check the electric control box.
Shenzhen Lihao Machinery Equipment Co., Ltd. is a professional machinery manufacturer integrating design, manufacturing, sales, service, and trade. We specialize in providing high-speed precision punch presses, uncoilers, straighteners, feeders, molds, and receiving machines for metal stamping automation.
With strong technical capabilities and over 20 years of experience in mechanics, electrics, and control, Lihao Machine offers customized solutions for industries such as home appliances, automotive, hardware, and electronics. Our products are recognized for their quality and reliability.
Lihao Machine holds a strong market share in China, with offices in over 20 regions. We have established partnerships with agents and distributors across various regions, providing installation, maintenance, and support services to customers worldwide. Looking ahead, we are committed to expanding our global presence by seeking new agents in additional regions.
Our products are exported to numerous regions around the world, bringing advanced solutions to diverse markets.
Adhering to the principles of "Technology, Quality, Customer, Credibility," we strive to offer exceptional products and reliable services to our global customers, positioning ourselves as your trusted partner in stamping automation.
At Lihao Machine, we ensure efficient and reliable logistics and delivery solutions to meet the needs of our international customers. Our transportation methods include sea freight, air freight, and land transport, depending on the destination and urgency of the order.
Shipping Terms and Delivery Locations:
We ship to major markets worldwide, including regions such as North America, South America, Southeast Asia, and Europe. Our products can be delivered to ports or directly to your specified location, providing flexibility to meet various delivery needs.
Shipping Costs:
Shipping fees are calculated based on the weight, volume, and delivery location of your order. We offer competitive pricing and work with trusted logistics partners to ensure timely and secure delivery.
Lead Time:
Delivery times vary depending on the shipping method and destination. We aim to provide an estimated delivery time at the time of order placement.
If you have any specific logistics or shipping requirements or questions, our customer service team is available to assist you throughout the process.
1. Q: What payment methods do you accept?
A: We accept T/T , L/C, and PayPal.
2. Q: How to maintain equipment?
A: We have equipment maintenance operation manuals available
3. Q: How long does it take to deliver?
A: Delivery time varies depending on the way the production is customized, we will give you an estimate when quoting.
4. Q: How to install?
A: There are installation videos and installation manuals, and we can also provide door-to-door installation and debugging services (additional fees are required)
5. Q: Can it be covered by warranty?
A: If it is not damaged by human factors, we can provide a one-year warranty service, but lubricating oil, belts and other consumables for equipment operation are not covered by warranty.
