
Product Features:
- 1) Power : 5W
2) 6 band Frequency Range: 136.00-174.00 MHz FM:65-108Mhz AM:108-130Mhz
400.00-520.00MHz 200-260MHz 350-390Mhz
3) Frequency Step Setting
4) High &Low Power Switchover
5) Battery Saving
6) VOX Function
7) Wide/Narrow Band Selection
8) Auto-Back Light
9) Dual Band Standby
10) Time-out Timer (TOT)
11) 50 CTCSS and 104 DCS Codes
12) Voice Prompt
13) ANI Code
14) PC or Manual Program
15) DTMF Code
16) PTT-ID
17) ATUO Keypad Lock
18) Busy Channel Lock Function
19) Dual Band, Dual Display and Dual Standby
20) Emergency Alarm
21) Priory Scanning Function
22) Relay Forwarding Confirmed (1750 HZ)
23) Low Battery Warning
24) NOAA Function support in American - 25)GPS Function Optional
- 26) FRS PMR GMRS
- 27)1.77 Inch colorful screen
- 28)Flashlight
Product Name | BAOFENG UV-20M UV-20 |
Dimensions: | 115x60x33 mm |
Frequency Range: | 136-174MHz 400-520MHz |
Storage Channel: | 1000 Channels |
Talk Range: | 3-5KM |
Output Power: | 5W |
Battery capacity: | 1800mAh |





Q: Why sometimes your partner's voice is intermittent?
A: Please note that you are within normal communication range, If you want use radio in distance range, please change other antenna with a bigger output power.If still same problem, please send the radio back to your authorized dealer repair.
Q: Can't turn on talky and even it is switch on, it often shuts off automatically?
A: Please check the battery contacts on the walkie talkie. If it is broken or twisted, please return the radio to your authorized dealer for maintenance during warranty.
Q: Can't transmit or receiver signal with other members?
A: First, please verify that the channel frequency and the CTCSS, you are used the same as those of your group members. Please make sure that you and your partners are all within the radio coverage, If the channel frequency and the CTCSS are the same.
Q: Why sometimes received voice from other groups?
A: Two way solutions.You can change another channel or change another channel frequency by PC software.
Q: Which is better -VHF or UHF?
A: epends on the terrain. The UHF signal is attenuated or absorbed by foliage, rough terrain and trees, VHF does better outdoors. The VHF has difficulties penetrating steel and concrete, UHF does better in and around buildings. If you use the radios in both environments, we prefer using UHF band.