Audited Supplier
40KN-6
FRP Anchor Bolt Making Machine
40kn
220V-660V
15 Years
PLC Full Automatic
32mm
0.1-1.0m/Min
Pneumatic Length-Fixing Cutting
Double Head
ISO Ce SGS
Zhihong
Standard Wooden Case
National standards
Shandong, China
8477800000
Product Description
Basalt Fiber Anchor Bolt Rock Bolt Making Equipment
Product Description:
The FRP rebar production line is the special pultrusion machine used to produce FRP rebar with different specifications from diameter 6mm to 32mm. It can finish distributing roving, impregnation, pre-molding, winding, heating and curing, unwinding, fix-length cutting and pile up automatically.
The Newest production line can make 2pcs rebars at one time. so the production efficiency is high.
The line is the special pultrusion machine used to produce FRP rebar with different specifications. It can finish distributing roving, impregnation, pre-molding, winding, heating and curing, unwinding, fix-length cutting and pile up automatically.
A. Structure principle:
This line mainly consists of roving racks, resin bath, winding, heating oven, unwinding device, traction machine, cutting saw and racks for finished products.
1. Roving racks: Used to place the rolls, adopts the welding structure of steel plate, steel pipe and angle iron.
2. Resin bath: Welded by stainless steel material, there is press roller inside to make the roving DIP in the resin sufficiently.
3. Winding & unwinding device: Adopts gear wheel to drive the roller turn around the products, and wind the thread. This device adopts frequency conversion speed-regulated mode, adjust the rotate speed stepless.
4. Heating oven: Adopts cast aluminum heater, intelligent temperature controller to control the temperature. The heating box adopts mesh structure and it is easy to open it and clean the dropping resin, filled with insulation materials inside.
5. The material of mould is 45 or 40Cr painted with chrome on the surface.
Details Show Of Our FRP Rebar Pultrusion Machine
Packaging and Shipping:
Nude Packing or According to Customer′s Requirement
Delivery time:
45 days after receipt deposit
Payment Term:
T/T 30% deposit , 70% balance by T/T paid off before delivery after customer finished inspection in our factory; Or L/C at sight with irrevocable.
Our Services:
as requested by buyer, seller may send 1-2 technicians to buyer's factory for installation and adjustment , buyer should afford technician's round air tickets, room and board, safety, commission of everyone is usd60.00/day.
About our company:
Our FRP pultrusion Machines have exported to Iran, Ukraine, united Arab emirates, Russia etc.
If you are interested in our products above. Kindly let us know by return email. Then we will reply you immediately with detailed catalogue and quotations. Of course, welcome to visit our factory!
Qingdao Zhihongda Machinery co.,ltd, Except the FRP Profile Pultrusion Machine, We can also design and manufacture all kinds of Rubber machinery. Such as vulcanizing press, rubber extruder etc. We have a group of professional engineers who engaged in this field for more than 15 Years in charge of designing,manufacturing, installing,testing. So we can guarantee that our machines will be running with good performance based on high quality. Good after-sales service will be satificated with you.
Qingdao Zhihongda Machinery Co.,Ltd located in Qingdao City.You can fly to Qingdao Liuting airport,then we can pick you up to our facotry to visit.Warm welcome to visit us.
Contact person: Zhang meihua
Product Description:
The FRP rebar production line is the special pultrusion machine used to produce FRP rebar with different specifications from diameter 6mm to 32mm. It can finish distributing roving, impregnation, pre-molding, winding, heating and curing, unwinding, fix-length cutting and pile up automatically.
The Newest production line can make 2pcs rebars at one time. so the production efficiency is high.
| Technical parameter | |||
| Working voltage | 380V/50HZ | Air pressure | 0.4-0.6MPa |
| Total power | 30KW | Central height | 1000mm |
| No. of winding head | 2 | Distance between two winding heads | 411mm |
| Winding speed | 9-95rpm | Winding diameter | 6- 32mm |
| Traction speed | 0.1-1.0m/min | Traction force | Max 40KN |
| Clamping length | 1200mm | Clamping width | 500mm |
| Cutting envelope | 500(W)x85mm(H) | Cutting rotation speed | 2850rpm |
| Tracing cutting journey | 700mm | Length fixed | Limit switch |
| dimension | 20000x1850x1450mm | ||
The line is the special pultrusion machine used to produce FRP rebar with different specifications. It can finish distributing roving, impregnation, pre-molding, winding, heating and curing, unwinding, fix-length cutting and pile up automatically.
A. Structure principle:
This line mainly consists of roving racks, resin bath, winding, heating oven, unwinding device, traction machine, cutting saw and racks for finished products.
1. Roving racks: Used to place the rolls, adopts the welding structure of steel plate, steel pipe and angle iron.
2. Resin bath: Welded by stainless steel material, there is press roller inside to make the roving DIP in the resin sufficiently.
3. Winding & unwinding device: Adopts gear wheel to drive the roller turn around the products, and wind the thread. This device adopts frequency conversion speed-regulated mode, adjust the rotate speed stepless.
4. Heating oven: Adopts cast aluminum heater, intelligent temperature controller to control the temperature. The heating box adopts mesh structure and it is easy to open it and clean the dropping resin, filled with insulation materials inside.
5. The material of mould is 45 or 40Cr painted with chrome on the surface.
Details Show Of Our FRP Rebar Pultrusion Machine
Packaging and Shipping:
Nude Packing or According to Customer′s Requirement
Delivery time:
45 days after receipt deposit
Payment Term:
T/T 30% deposit , 70% balance by T/T paid off before delivery after customer finished inspection in our factory; Or L/C at sight with irrevocable.
Our Services:
as requested by buyer, seller may send 1-2 technicians to buyer's factory for installation and adjustment , buyer should afford technician's round air tickets, room and board, safety, commission of everyone is usd60.00/day.
About our company:
Our FRP pultrusion Machines have exported to Iran, Ukraine, united Arab emirates, Russia etc.
If you are interested in our products above. Kindly let us know by return email. Then we will reply you immediately with detailed catalogue and quotations. Of course, welcome to visit our factory!
Qingdao Zhihongda Machinery co.,ltd, Except the FRP Profile Pultrusion Machine, We can also design and manufacture all kinds of Rubber machinery. Such as vulcanizing press, rubber extruder etc. We have a group of professional engineers who engaged in this field for more than 15 Years in charge of designing,manufacturing, installing,testing. So we can guarantee that our machines will be running with good performance based on high quality. Good after-sales service will be satificated with you.
Qingdao Zhihongda Machinery Co.,Ltd located in Qingdao City.You can fly to Qingdao Liuting airport,then we can pick you up to our facotry to visit.Warm welcome to visit us.
Contact person: Zhang meihua
