Audited Supplier
ATUF
>±1%
Water, Wastewater, Diesel Fuel, Fuel Oil, Corrosive Liquid/Gas
Plug-in
Industrial Production
Ultrasonic Flow Meter
Liquid
Closed Pipeline
CE, ISO
AC220V and DC24V
Medium: -30~160 Degree
0.2%
10000ppm and with Little Bubbles
4-20mA/Oct/Relay
0 ~ 32m S
Carton Box with PP Film Wooden Box
China
9026801000
Product Description
ATUF Wall mounted ultrasonic flow meter is easy to install which could reduce installation time and cost. With no pressure head loss, no moving parts which is very easy to maintain and replace. Support BTU function, could be used as a portable type BTU (energy) meter. Inaddition, it is widely applied in oil industry, water treatment, pure water, chemical and etc.
| Items | Specifications |
| Accuracy | ±1% of reading at rates >0.2 mps |
| Repeatability | 0.2% |
| Principle | Transmit time |
| Velocity | ±32m/s |
| Pipe Size | DN15mm-DN6000mm |
| Display | LCD with backlight, display accumulated flow/heat, instantaneous flow/heat, velocity, time etc. |
| Signal Output | 1 way 4-20mA output |
| 1 way OCT pulse output | |
| 1 way relay output | |
| Signal Input | 3 way 4-20mA input achieve to heat measurement by connecting PT100 platinum resistor |
| Other Functions | Automatically record the positive,negative,net totalizer flow rate and heat. Automatically record the time of power-on/off and flow rate of the last 30 times.Replenish by hand or read the datas through Modbus communication protocol. |
| Pipe Material | Carbon Steel, stainless steel, cast iron, cement pipe, copper, PVC, aluminum, FRP etc. Liner is allowed |
| Straight Pipe Section | Upstram: 10D; Downsteam:5D; From the pump:30D (D means outer diameter) |
| Liquid Types | Water, sea water, industrial sewage, acid & alkali liquid, alcohol, beer, all kinds of oils which can transmit ultrasonic single uniform liquid |
| Liquid Temperature | Standard: -30ºC ~ 90ºC ,High-temperature:-30ºC ~ 160ºC |
| Liquid Turbidity | Less than 10000ppm, with a little bubble |
| Flow Direction | Bi-directional measuring, net flow/heat measuring |
| Environment Temperature | Main Unit: -30ºC ~ 80ºC |
| Transducer: -40ºC ~ 110ºC, Temperature transducer: select on enquiry | |
| Environment Humidity | Main Unit: 85% RH |
| Transducer: standard is IP65, IP68(optional) | |
| Cable | Twisted Pair Line, standard length of 5m, can be extended to 500m (not recommended); Contact the manufacturer for longer cable requirement. RS-485 interface, transmission distance up to 1000m |
| Power Supply | AC220V and DC24V |
| Power Consumption | Less than 1.5W |
| Communication | MODBUS RTU RS485 |
- Installation Environment
The flow meter shall be installed away from high temperature, thermal radiation from equipment or corrosive gas.
Ultrasonic flow meters can't be installed nearby motors, transformers or other power sources that are easy to cause electromagnet interference. DO NOT install ultrasonic flow meters nearby frequency converters or DO NOT connect it with the distributing cabinet of frequency converters to avoid interference.
In convenience for installation and maintenance, keep sufficient space around the flow meter.
- Support of Flow meter
- Requirements on Liquid-receiving Material
- Dangerous Conditions
You could select the flow meter with an explosion-proof housing, and intrinsic safety explosion-proof flow meter with intrinsic safety design circuit to ensure its safety and flame-retardant operation. Each flow meter should have a nameplate clearly identifying its certifications. Please DO install and use the flow meter according to the explosion-proof grade and protection grade as shown on the nameplate.
To ensure measurement accuracy of the flowmeter, try to satisfy the following requirements on the length of straight pipe sections installed nearby the flowmeter: upstream >20D, downstream>10D.
Q: how can we guarantee quality?
A:Always a pre-production sample before mass production; Always final Inspection before shipment;
Q:what can you buy from us?
A:Electromagnetic Flow Meter; Vortex Flow Meter; Ultrasonic Flow Meter; Thermal Mass Flow Meter; Turbine Flow Meter
Q: why should you buy from us not from other suppliers?
A:Main Product 1 .ELECTROMAGNETIC FLOW METER 2 .VORTEX FLOW METER 3 .THROTTLING DEVICE 4 .Turbine flowmeter 5 .Rotaflowmeter 6 .Utrasonic level meter/utrasonic flowmeter 7 .Radar level flowmeter 8 .Coriolis Mass Flow Meter 9. Calibration device
Q: what services can we provide?
A:Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian
