Audited Supplier
ALD-metal lath
5 Years
5 Years
Galvanized Sheet Plate
Construction Wire Mesh, Protecting Mesh, Decorative Mesh
Diamond
Protection, Aquaculture, Water Conservancy Construction, Civil Building
Stamping
Galvanized
Expanded Metal Mesh
Hot-galvanize
Wire Annealing
Thickness
1.75lbs/2.5lbs/3.4lbs
27X97 Galvanized Expanded Metal Lath Mesh
Graphic Design, Total Solution for Projects
Modern
Non-Secondary
Online Technical Support, Onsite Inspection
Hot Dipped Galvanized
Flat,Self-Furring Dimples
27''x97''
Diamond
G30, G60
0.2mm-0.6mm
1.75lbs,2.5lbs,3.4lbs
ISO9001:2015, CE
Available
Free
ANLIDA
10PCS Per Bundle, 500PCS Per Pallet
Standard: 27x97''
Hebei, China
7314500000
Product Description
Best Price 27x97 Galvanized Expanded Metal Lath Mesh For Stucco Plaster
ANLIDA expanded dimpled metal lath is manufactured with approximately 1/4" deep dimples that raise diamond mesh away from solid surfaces to enable thorough plaster or stucco penetration into and behind the lath for superior mechanical bonding.
Expanded metal lath is widely applied on wall, ceiling and other building plastering works, including the reinforcement and renovation of joints and cracks as it offers better plaster bonding property and enhanced crack resistance.
Specification of Expanded Metal Lath:
| Product | Weight (Lbs/Sq. Yard) | Normal Sheet Size | Sheet/Bundle | Bundle/Pallet | Sheet Weight |
| Dimpled metal lath | 1.75 | 27''x97'' | 10 | 50 | 2.8Lbs |
| 2.5 | 10 | 50 | 5.0Lbs | ||
| 3.4 | 10 | 50 | 6.8Lbs |
Expanded metal lath made by high quality galvanized steel plate. Self-Furred Lath was used extensively in exterior stucco and stone work over sheathing and as a plaster base over masonry walls. Self-furring dimples or embossed "V"grooves hold the lath minimum 1⁄4" away from solid surfaces to aid in the keying of stucco to the lath.
Expanded Metal Lath
Expanded metal lath is formed from sheet steel that has been slit and expanded to form hundreds of "keys" per square yard. It is proven over time to possess exceptional strength and flexibility, making it the preferred metal base requested by contractors and
design professionals.
design professionals.
Dimpled Self-furring Metal Lath
The dimple-patterned, self-furring plaster base is manufactured with evenly spaced indentations that hold the metal lath 1/4" away from the surface to be plastered. This results in an even and thorough embedment of the plaster.
Paper-backed lath
It provides protection against wet areas during stucco curing. Paper-Backed Lath comes in flat and self-furring configurations to
accommodate your installation needs.
accommodate your installation needs.
Diamond mesh lath is used as a substrate for Portland cement or gypsum plaster on either interior or exterior walls, ceilings, soffit and fascia surfaces, and can be used under ceramic tile in wall, ceiling and floor applications. It's useful in all general-purpose applications and is the best lath available for ornamental work and contoured surfaces, as well a sprayapplied fireproofing.
ANLIDA provide standard pallet packing.
10Pcs/Bundle, 50Bundles/Pallet (500Pcs/Pallet).
Anping County Great Wall Steel Mesh Factory was founded in 2001. Anping Anlida Metal Mesh Co., Ltd. was registered in 2006, and Hebei Baiyun Steel Mesh Co., Ltd. was registered in 2014 with a registered capital of 10 million. The company is located in the "Hometown of Wire Mesh" in China-Anping County, Hebei Province, next to Xiong'an New District. It covers an area of 8,000 square meters, the workshop construction area is 5,000 square meters, more than 30 sets of large and small equipment, more than 80 outstanding employees, including 10 management personnel, 15 professional and technical personnel. The main products are heavy-duty expanded metal mesh, architectural decorative mesh, stretch mesh, expanded metal mesh, aluminum expanded metal mesh, and punched mesh. Our factory has the nation's heaviest machine, which can punch 3.05 meters wide and 10mm thick steel plates.
Through nearly two decades of development, it has formed a complete one-stop production process of punching, flattening, rolling, finishing, and cutting. The equipment and technology have been able to meet the quality standards of Europe, the United States, Korea, and Japan.
Through nearly two decades of development, it has formed a complete one-stop production process of punching, flattening, rolling, finishing, and cutting. The equipment and technology have been able to meet the quality standards of Europe, the United States, Korea, and Japan.
