Bhq03 Centrifugal Wheel for Cleaning The Surface of Various Castings in Sand Casting

BHQ03 series belt type new shot blasting machine is sanzhuji in absorbing foreign advanced shot blasting machine on the basis of independent independent research and development, its characteristics are.

1 blasting impeller body speed up to 3000r/min, throwing speed up to 80m / s, can significantly improve the blasting cleaning effect.2 The internal sealing of the blast machine is more rigid, reliable and low noise.
3 Compared with the traditional blast machine, its top and side guard poles are made of special structure, with a partial thickness of 70mm, which greatly improves the overall wear resistance.


BHQ03 series belt shot blasting machine: metal surface treatment revolution - industrial-grade solution with 200% efficiency improvement and 3 times longer wear life
In the fields of precision manufacturing such as automotive parts and engineering machinery, traditional shot blasting equipment often faces three major pain points: low cleaning efficiency (processing capacity per hour <2 tons), short guard plate life (replacement every 6 months) and severe noise pollution (>95dB). BHQ03 series belt shot blasting machine has achieved a breakthrough upgrade of cleaning efficiency of 4.5 tons/hour and guard plate life of 3 years+ through the subversive design of 3000r/min ultra-high-speed shot blasting machine and 70mm composite wear-resistant guard plate, becoming a benchmark equipment in the field of metal surface strengthening. This article deeply analyzes the equipment technical parameters, 20+ industry application scenarios and economic benefits, and provides enterprises with a full-link guide from process adaptation to cost optimization.


1. Core technology breakthrough: ultra-high-speed shot blasting and military-grade protection
3000r/min centrifugal shot blasting system (in compliance with SAE J443 standard)
Dual impeller coordinated shot blasting:
Using CrMo alloy impeller (HB280-320), single-piece weight deviation <0.5g, dynamic balance level G2.5;
Shot blasting speed 80m/s, 78% higher than traditional equipment (60m/s) projectile kinetic energy, cleaning efficiency reaches 4.5 tons/hour.
Intelligent flow control:
Based on the workpiece material (steel/aluminum/cast iron), the projectile flow rate (200-600kg/min) is automatically adjusted, and energy consumption is reduced by 25%;
Actual data: Q235 steel plate rust removal efficiency reaches SA2.5 level in only 90 seconds (traditional equipment takes 180 seconds).


2. Strategic value of BHQ03 series:
Wear-resistant guard plate system: Choose five-layer composite structure equipment to ensure 3 years of maintenance-free;
Intelligent IoT capability: Equipment that supports remote operation and maintenance can reduce 30% of downtime losses;
Environmental compliance: Dust emission <5mg/m³, noise <75dB are the entry thresholds for industrial parks;