Biaxial Fully Automatic Shuttle Rotational Moulding Machine

Product Introduction

The shuttle type rotational molding machine is equipped with two arms. One arm can be used for mold disassembly and assembly, while the other arm can also be used for continuous production in the oven. It occupies a small area and is a practical machine.

Mechanical part:
·The equipment assembly adopts modular design, which can be quickly installed.
·A cylindrical oven with low energy consumption and high efficiency.
·The main shaft is thickened , and the gearbox directly drives the main shaft to avoid shaking.
·The internally main shaft installed with an external ф Within 27 ф 21 breathable tubes that can pass through a large volume of air.

Oven:
·The oven temperature has abolished the previous two-stage (high/low fire) heating method and adopts real-time monitoring, using the ratio control valve on the burner for fine tuning.

·The temperature inside the cylindrical oven is uniform, and hot air is blown into the oven through a stainless steel vortex fan below the oven, and then flows into the oven through the top suction port for reuse.

·Lower air outlet and upper circulation, accumulated material not catching fire.

·2mm thick plate inside the drying channel, durable and long-lasting.

Combustion system:

·Optional combustion engine (domestically produced Reillo, domestically produced Weiru, German Weishaupt, and American Maxon),

·The fuel can be natural gas, liquefied gas, or diesel.

Control system:

PLC system: can choose Delta system or Siemens system, with standardized wiring and direct signal to control cabinet,
Reduce the delay and interference generated by wireless transmission.

Heating program: Each arm can be individually set with three different heating temperatures, heating time, internal and external shaft speeds, and circulating air volume.

Cooling function: cooling time, cooling delay time, water mist (optional).

Storage function: Store the production parameters of the corresponding product.

Spindle and countershaft remote control: wireless remote control with rotating arm, convenient for mold disassembly and assembly (optional).





Benfan rotomolding machine advantage:

1.    It only takes 3mins. from room temperature increase to 250 to 280 degree in oven

2.    Arm is made of special alloy material which is good load

3.    Full gear transmission, high efficiency

4.    Full automatic operation,prognsis equipment trouble in advance and solve it in time.

5.    Heavy duty oven and energy saving

6.    Loading and unloading easy for mould

7.    Special deep cavity heating technical, suitable for complicated product

8.    Internet remote control (if the machine has problem in your factory, we can solve the problem through internet)
 
9.   PLC and Motors are Siemens brand from German,Burner is RIELLO from Italy,Bearing is NSK from Japan, all electrial compenents are using Schneider brand.

10.  Big computer screen, bob-weight system, special made motor, thermostability sealing arm head etc

11.  Use circle oven, it is more uniform heat distribution on the mold, that means it is good for product making and also more energy saving.

Technical parameters