Audited Supplier
Black Annealed Wire
Hard Drawn Low Carbon Wire has been cold drawn to the required diameter and heat treatment is available. Often used for plating, redrawing and coating, it is important that the surface finish of the wire is clean and smooth. It will take moderate bending or flattening, machine ability is fair and the wire can be roll threaded.
This is a general purpose manufacturing wire suitable for a large range of applications. Various applications include super market trolleys, shelving, baskets, racks, hooks and general automotive parts.
Additional Info
Diameter Range: 1.60-12.50 mm
Diameter Range: 1.90-12.50 mm
Diameter Range: 4.00-7.80 mm
Hard Drawn Low Carbon Wire Specifications
Diameter Properties
Hard Drawn Low Carbon Wire is manufactured to comply with the following diameter tolerances:
Nominal Wire Diameter | Tolerance (mm) |
1.60mm up to and incl. 1.80mm over 1.80mm up to an incl. 2.80mm over 2.80mm up to and incl. 5.00mm over 5.00mm up to and incl. 8.00mm | +/- 0.02 +/- 0.03 +/- 0.03 +/- 0.03 |
Tensile Strength (MPa)
The tensile strength is defined as the maximum load achieved in the tensile test, divided by the cross-sectional area of the wire test. The tensile strength developed depends on the amount of reduction in area to the finished size. Tensile is not considered of prime importance to this product however the following table is given as a general guide:
Nominal Wire Diameter | Tensile Range (Mpa) |
less than or equal to 1.75mm over 1.75mm up to and incl. 2.00mm over 2.00mm up to and incl. 2.24mm over 2.24mm up to and incl. 2.70mm over 2.70mm up to and incl. 2.80mm over 2.80mm up to and incl. 4.20mm over 4.20mm up to and incl. 10.00mm over 10.00mm up to and incl. 11.50mm over 11.50mm up to and incl. 12.50mm | 800/1100 750/1050 700/1000 650/950 600/900 550/850 500/800 450/750 500/800 |
Steel Chemistry
OneSteel uses a variety of steel grades to manufacture its Hard Drawn Low Carbon range. The table below is indicative only of steel chemistries used.
Q: Manufacturer or Trader?
A: We are manufacturer in wire industry for more than 20 years.
Q: Producing Capacity?
A: The producing capacity totally is 9, 000 tons per month. The producing capacity of this product is 1,500 tons per month.
Q: Main Market?
A: Our main market is foreign customers. 80% of the products are for exporting. The main countries are Japan, South Korea, South Asian area, Europe, America, Canada, and South America etc.
Q: What information should I provide when inquiring?
A: The diameter before pvc coating; after pvc coating, the requirement of the core wire like zinc coating, tensile strength, packing, colour
Q: What is the MOQ?
A: For quality checking, we accept small quantity order like one coil. For normal cooperation, we prefer FCL container quantity to ensure the safety of goods in transportation.
Q: What is the payment term?
A: T/T; L/C; D/P etc
Q: Free sample available?
A: Yes. Free sample within 2kg is available
Q: Third Party Inspection available?
A: Yes, available. The charges are on the buyer.
