Audited Supplier
MS805-YZH
Carbon Steel
Bugle Head
Phpsphated
ISO, GS, RoHS, CE
Non-Customized
Countersunk Head
Cross
Common Bolt
Counter Sunk Bolt
DIN, GB, ANSI, Bsw, JIS
9.8
pH #2, Cross Recess, Phillips
Black, Gray, White
30days, 45days, 60days, Follow Customer Wishes
Drywall Screw, Dry Wall Screw, Gypsum Screw
OEM
Bulk, Bag, Box
M3.5X13 M3.5x16 M3.5x19 M3.5x25 M3.5x32 M3.5x35 M3
Zhejiangchina
731814
Product Description
| Name | Bugle Head Phillips Drive Twinfast Gypsum Nail / Drywall screw |
| Head | Bugle Phillips |
| Thread | Fine Thread,Twinfast, |
| wire diameter | 2.58,2.65,2.75 |
| Material | C1022,carbon steel,alloy steel |
| Finish: | Phosphated (Black/grey phosphate or zinc plated) |
| Packing | Bulk, Small Box, Carton, Plastic Bag, Custom Made Requirement |
| Application | Drywall screws are used for the installation of various plasterboard, lightweight partition and ceiling series, sometimes called plasterboard screws, and in addition drywall screws are much less damaging to wood, can be reused and are increasingly widely used in wood, metal, various panels.Twinfast Thread For Metal Constructions |
| Origin | Zhejiang,China |
Black Phosphated PH Recess Drywall Screws with Bugle Head and Fine Thread
For plasterboard.Up to 0.7 mm thick metal profi les without pre-drilling.
| Length | Drive Size | Threading |
| Zinc-Aluminum Coated Steel Fine Thread Drywall Screw | ||
| No. 6 | ||
| 1" | No. 2 | Fully Threaded |
| 1 1/4" | No. 2 | |
| 1 5/8" | No. 2 | |
| 2" | No. 2 | |
| No. 8 | ||
| 2 1/2" | No. 2 | Partially Threaded |
| 3" | No. 2 | |
| No. 10 | ||
| 3 3/4" | No. 2 | Partially Threaded |
| 4 1/2" | No. 2 | |
| 5" | No. 2 | |
| 6" | No. 2 | |
| Black-Phosphate Steel | ||
| No. 6 | ||
| 1" | No. 2 | Fully Threaded |
| 1 1/8" | No. 2 | |
| 1 1/4" | No. 2 | |
| 1 5/8" | No. 2 | |
| 2" | No. 2 | |
| 2 1/4" | No. 2 | |
| No. 8 | ||
| 2 1/2" | No. 2 | Partially Threaded |
| 3" | No. 2 | |
| No. 10 | ||
| 3 1/2" | No. 2 | Partially Threaded |
| 3 3/4" | No. 2 | |
| 4" | No. 2 | |
| 4 1/2" | No. 2 | |
| 5" | No. 2 | |
| 6" | No. 2 | |
Zinc Coated/Black-Phosphated Bugle Head PH Recess Framing Nails /Gypsum Screw / Drywall Screws for Drywall to Metal
These drywall screws Attach drywall to metal studs up to 0.036" thick. These screws have a sharp point that penetrates drywall and sheet metal and a curved neck that sinks into drywall without tearing its paper surface. Length is measured from the top of the head.
Zinc-aluminum coated steel drywall screws provide 500 hours of salt spray resistance and are more corrosion resistant than black-phosphate steel screws.
Black-phosphate steel drywall screws resist corrosion in dry environments.
There are many models of drywall screws, the following types can be produced:
Head: Bugle Head, Trim Head, CSK Head with, pan head frame screw, Washer Head;Thread: FineThread, Corase Thread, Hi-Lo Thread (High Low Thread);
Finish: Black Phosphate, Galvanized, Dacromet, Ruspet.
Although drywall installation guides and other resources often refer to drywall screws as Type S and Type W, you will usually find them identified instead by their thread type, such as coarse or fine. To make sure you use the correct screw for the job.
| S / Fine Thread drywall screw | Drywall to Steel |
| W / Coarse Thread drywall screw | Drywall to Wood |
| G / Hi-lo Thread drywall screw | Drywall to Drywall |
Q1: Are you trading company or manufacturer?
A1: We are the manufacturer. (We are the international trade branch of the factory)
We provide 7x24 hours real-time video verification factory service.
Q2:What is your core product?
A2:We specialize in the production of high quality screws, mainly drywall screws, particle board screws, wood screws, etc.
Q3: How long is your delivery time?
A3: If the goods are in stock, within 15 days. 30-60 days for bulk order.
Q4: What is your terms of payment ?
A4: 30%-40% T/T in advance ,balance before shippment.(For orders less than USD1000, pay 100% in advance to reduce bank fees.)
Q5.Can you provide a sample?
A5: Sure, Our sample is provided free of charge, but not including courier fees.
Choose us!
1) Custom designs available. ODM and OEM are welcome.
2) We hope to maintain long-term cooperation with every customer, we attach importance to quality and insist on providing high-quality products and services.
