Audited Supplier
Product Description
Our B-type sandblasting gun is made of aluminum alloy die-casting, high quality, easy to use, smooth, and wear-resistant sandblasting, and equipped with 1 durable 8mm boron carbide tip, which makes your work more convenient and efficient.
Adjustable air inlet thread clearance and ceramic tip
- You can adjust the distance to suit your work so that you can work more efficiently.
- The attached ceramic sandblasting nozzle allows you to complete your work evenly and effectively and can accept and spray various types of media, including sand (46-240#), alumina, silicon carbide, glass beads, etc.
Sandblasting gun partial details
The grip is ergonomically designed, Comfortable pistol-grip design reduces operator fatigue and increases productivity during prolonged blasting.
Comfortable grip
The hanging hole on the top of the gun body is convenient for you to place after use. The quick connector is made of brass, wear-resistant, convenient for installing air and sand pipes.
Specification
| Material | Aluminum |
| Nozzle | Ceramic nozzle |
| Gun body size | 188*168*50 mm |
| Nozzle size | 6mm |
| Use | Specially used for polishing, spraying and polishing various dead ends of light metals and small metals, rough edges and rusty details as well as paint peeling, tiles, car surface treatment, glass etching, etc. |
Operation:
1.The operator inserts the nozzle washer into a contractor-thread nozzle holder and screws in the nozzle, turning it by hand until it seats firmly against the washer.
2.With all related equipment correctly assembled and tested, the operator points the nozzle at the surface to be cleaned and presses the remote control handle to begin blasting.
3.The operator holds the nozzle 18 to 36 inches from the surface and moves it smoothly at a rate that produces the desired cleanliness. Each pass should overlap slightly.
4.The operator must replace the nozzle once the orifice wears 1/16-inch beyond its original size.
Some of the reasons why the sandblasting gun can't run
- 1. Whether the air compressor is suitable (our sandblasting gun needs an air compressor of 7.5 kW/10 hp or more).
- 2. Is the abrasive medium suitable (this product supports (46-240#) non-metal sandblasting materials, such as baking soda or glass beads, sodium bicarbonate, silica, walnut, garnet, etc.).
- 3. Is the pressure suitable, if your sandblasting cabinet has sandblasting pressure adjustment, you can also adjust the pressure size of the air compressor through the regulator.
- 4. Whether the sand valve is clogged, sand blasting machine within the unselected abrasive size is not the same, will form a sand valve clogging.
- 5. Whether the abrasive is damp, an air compressor is with sandblasting gun deployment and essential equipment, air compressor compressed air will produce water so that the abrasive damp cohesion.
- 6. Sandblasting tube is blocked, sandblasting tube because its special structure is particularly simple to be blocked by foreign objects, sand storage cylinder abrasive whether it has been used up.
