Audited Supplier
1,Rock drill truck tunnel positioning function
2, rock drill truck 3D tunnel scanning function
3,Design tunnel drilling and blasting hole layout, on-site adjustment of the layout of the map function
4, with manual, semi-automatic and fully automatic drilling construction functions
5, drilling can be generated after the completion of drilling geological reports
6, rock drilling data storage and transmission
7, Anchor construction and over-excursion geological detection function
8,With drilling and blasting charging and prying function.
9,Automatic pole changing function of intermediate arm
10, Trolley fault diagnosis alarm function
11, rock drill dolly traveling image display, auxiliary driving function
12,Locking function of the whole machine
Title | Weight of the machine | Maximum working area (mm) | Drilling diameter (mm) | Drilling depth (mm) | Impact force during |
| (t) | drilling, kW | ||||
| UDD124 | 10 | 5000*5000 | 45-102 | 28300/3440 | 18.8/18 |
| UDD124S | 10 | 5025*5000 | 45-102 | 2830/3440 | 18.8/18 |
| UDD119P | 8 | 4900*5100 | 38-64 | 2200/2500 | 18.8/18/14 |
| UDD135 | 14 | 6600*6630 | 45-102/33-64 | 3400/4000 | 18.8/18 |
| UDD145ED | 13.6 | 13200*9400 | 45-89 | 3400+2800(6200) | 18 |
| UDD138B | 13.5 | 6950*6550 | 33-64 | 3400/4000 | 18 |
| UDD142I | 14.5 | 7600*6900 | 33-64 | 3400/4000 | 18 |
| UDD252 | 22 | 9052*6775 | 45-10/33-64 | 3400/4000 | 18.8/18 |
| UDD138L | 12.7 | 8129*6049 | 45-64 | 4000/3440 | 18.8/18/14 |
| UPD120 | 10 | 4500*4500 | 64-76 | 20000 | 18 |
| UPD240C | 15.5 | 7500*5000 | 64-102 | 35000/4100 | 24 |
| UPD241 | 17.5 | 7500*5000 | 64-102 | 35000/41000 | 22/24 |
| UBD125 | 11.5 | 6550*5850 | 32-51 | 1630/1970/2120 | 8 |
| UBD125 | 14 | 8800*7100 | 32-51 | 1970/2120/2320/2600 | 8 |
| URB5000 | 20 | 4000*4000 | 311-5000 | 60METPOB | 365 |
| Title | Technical Parameters | parameter value | ||
| Basic Parameters | ||||
| 1 | Weight(kg) | 25,000 | ||
| 2 | Overall dimensions(mm) | 14,000×2,400×2,483(3183) | ||
| 3 | Operating range (W×H, mm) | 11,212×7,677 | ||
| 4 | Turning radius (mm) | 7,300 | ||
| 5 | Maximum coverage area (m2) | 72 | ||
| Equipment Configuration | ||||
| 1 | Rock Drill | Model×Quantity | HC109×2 | |
| Brand (made by international famous manufacturers) | Montabert | |||
| System pressure (bar) | 210 | |||
| Impact power (kW) | 18.8 | |||
| Impact hydraulic oil pressure (bar) | 135 | |||
| Impact frequency (Hz) | 47 | |||
| Impact work per time (J) | 400 | |||
| Rotary hydraulic oil pressure (bar) | 80 | |||
| Rotary torque (N-m) | 780 | |||
| Rotary speed (r/min) | 175 | |||
| Mass (kg) | 142 | |||
| 2 | Drill jibs | Telescopic stroke (mm) | 1250 | |
| Lifting angle (°) | +65°/-30° | |||
| Swing angle (°) | ±45° | |||
| Thruster compensation stroke (mm) | 1800 | |||
| Full parallel hold | √ | |||
| 3 | Push beams | Total length of propulsion beam (mm) | 6012 | |
| Maximum propulsion force (kN) | 22.5 | |||
| Length of drill pipe (mm) | 4305 | |||
| Depth of drilling in one push (mm) | 4000 | |||
| Overturning angle (°) | ±180° | |||
| Swing angle (°) | 0~90° | |||
| 4 | Service Work Platforms | Platform lifting height (m) | 8.7 | |
| Maximum covering width left and right (m) | 13.4 | |||
| Platform load capacity (kg) | 400 | |||
| Platform left-right swing angle (°) | ±45 | |||
| Up and down pitching angle (°) | -30~65 | |||
| 5 | Chassis | Traveling speed (km/h) | 15 | |
| Climbing ability (°) | 14 | |||
| Ground clearance (mm) | 229 | |||
| Approach/Departure Angle/° | ≥20/≥15 | |||
| motor | Model | B5.9CS4 150C | ||
| Power(kW) | 111 | |||
| Emission and noise standard | National IV | |||
| Transmission Systems | Four-wheel drive | |||
| Braking Systems | Wet dual circuit emergency brake; parking brake: spring brake, hydraulic release | |||
| Steering System | Articulated steering | |||
| Fuel tank volume (L) | 100 | |||
| 6 | Drilling Hydraulic Systems | Anti-brazing function | Yes | |
| Hydraulic oil tank volume (L) | 280 | |||
| Pressure oil and return oil accuracy (μm) | 10 | |||
| 7 | Aerosol Lubrication Systems | Displacement (L/min)/Pressure (bar) | 700/8 | |
| Lubricating oil volume (ml/min) | 1 | |||
| 8 | Water System | Flow rate (L/min) | 96.7 | |
| Minimum inlet pressure (bar) | 2 | |||
| 9 | Electrical system | Total input power (kW) | 125 | |
| Motor power (kW) x quantity | 55 x 2 | |||
| Voltage (V)/Frequency (Hz) | 380/50 | |||
| Starting mode | Star/Triangle | |||
| Safety Protection System Functions | Leakage protection, overload protection, short circuit protection | |||
1.Power System
Located at the middle of the frame, it is mainly composed of diesel engine, radiator, diesel box, air filter, exhaust purification device, fuel filter, oil filter, etc. In addition to providing power for driving and braking during the driving process, it can also provide power for other actions besides rock drill impact and rotation.
2.Drive System
Mainly by the front axle and rear axle, tires, gearbox, drive shaft and so on, mainly used for walking. Driving system consists of the engine power into walking vehicle power, at the same time meet the requirements of braking. Standard wet bridge.
3.Frame
Mainly divided into the front frame, frame, after the end of three parts, after the former frame and frame with vertical pin shaft between the hinged connection, can complete the vehicle of the articulated steering function; Before and after leg used in vehicle leveling jumbo drilling operations; In addition to cable reel bracket etc. Under the frame of transmission system, the frame is jumbo bearing the main structure of the various components.
4.Boom
Fixed by drill arm,triangle cylinder,square welded after the boom,tile cover type rectangular welded cylinder telescopic arm,front triangle,triangle installation before welding,rotating cylinder,welded bodyand push the beam welded turn arm bracket, etc.; Fixed seat can be connected with arm drill arm, after triangle cylinder with former oil cylinder connected by hydraulic system, to achieve the function of the parallel drill arm keep; Bracket for installing thrusters, rotating cylinder can make the propeller shaft to rotate 360 °.
drill jumbo is mainly suitable for the tunneling construction, underground mining and other underground projects. It can be used for drilling of blasting holes, anchor holes, and slotted holes. There is also a platform available, which can be used in the installation of explosives, anchors and other appliances.
Omni-directional service capability:
As one of the few enterprises in the industry, we have the "five-in-one" omni-directional service capability of rock drill sales, maintenance and remanufacturing, application technology training, and leasing operation, which is able to satisfy diversified needs of customers.
Professional technical team:
The technical backbone are all from the state-owned construction units, engaged in underground engineering equipment maintenance and equipment management for more than 30 years, and have 36 patents of rock drill dolly. The company has a total of 135 registered employees, of which the R&D team consists of 20 experts with rich experience.
Abundant product lines:
The company specializes in underground engineering and offers a wide range of products including rock drills, concrete wet spray drilling rigs, rock drills, giant drilling rigs, underground loaders, mining dump trucks and their accessories, which are able to provide one-stop solutions for customers.
We have passed all kinds of international professional certifications and are listed as a national professional production enterprise. The company has an experienced and innovative workforce consisting of 70 employees, 20 specialized technicians and 5 engineers. It also has comprehensive inspection and monitoring methods and quality assurance systems. Since the establishment of our company, we have always adhered to the principle of "Quality First, Sincerity First".
Our products are sold to many countries overseas. Distributed in 20 countries in Europe, Africa and Asia. Our rock drilling trucks are traveling in the mines of various countries to work continuously. We cooperate deeply with international famous brands and make progress together!
1. What certificates do you have?
ISO9001, ISO45001, ISO4001 and other quality system certificates.
We have the national level China Honest Enterprise Certificate
2. Can you customize and design according to customers' requirements?
UGHM will do its best to meet the special requirements of various customers.
However, all customization and modification should be done safely and scientifically.
Colors can be drawn as per customer's requirement.
3. What is the warranty period for your products?
Usually 1 year or 2000 working hours, depending on the agreement. For more information, you will need to review the UGHM warranty policy for each model.
4. Delivery Times
Standard configurations are always in stock.
Other brands are subject to agreed delivery times.
Production lead times for customized products are 30 days.
5. Main Products
We mainly sell rock drills, jumbo drills, underground loaders, mining dump trucks, and their accessories.UGHM has R&D team and technical team with 20 years of industry experience, which can guarantee the quality of all products. You can get high quality products and satisfactory price here.
