Audited Supplier
300-200000cps
Viscosity Reducer Admixture
9032-42-2
White
Powder
Refined Cotton
ISO, GMP, CE
200g Free for Test
Factory Directly Sale
Qingdao Port
Tile Adhesive, Skim Coat, Dry Mortar
KimaCell
25kg/Bag
viscosity between 5-200000 cps
China
39123900
Product Description
Methyl Hydroxyethyl Cellulose(MHEC)
Methyl Hydroxyethyl Cellulose(MHEC) is also known as Hydroxyethyl Methyl Cellulose(HEMC), it is non-ionic white methyl cellulose ether, It is soluble in cold water but insoluble in hot water. MHEC can be used as high efficient water retention agent, stabilizer, adhesives and film-forming agent in construction, tile adhesives,cement and gypsum based plasters,liquid detergent ,and many other applications.
Physical and chemical properties:
Appearance: MHEC is white or almost white fibrous or granular powder; odorless.
Solubility: MHEC can dissolve in cold water and hot water, L model can only dissolve in cold water, MHEC is insoluble in most organic solvents. After surface treatment, MHEC disperses in cold water without agglomeration, and dissolves slowly, but it can be quickly dissolved by adjusting its PH value of 8~10.
PH stability: The viscosity changes little within the range of 2~12, and the viscosity decreases beyond this range.
Granularity: 40 mesh pass rate ≥99% 80 mesh pass rate 100%.
Apparent density: 0.30-0.60g/cm3.
MHEC has the characteristics of thickening, suspension, dispersion, adhesion, emulsification, film formation, and water retention. Its water retention is stronger than that of methyl cellulose, and its viscosity stability, mildew resistance, and dispersibility are stronger than that of hydroxyethyl cellulose.
Products Grades
2. Ceramic Tile adhesives: Improve the plasticity and water retention of the pressed tile mortar, improve the adhesive force of the tile, and prevent chalking.
3. Coating of refractory materials such as asbestos: As a suspension agent, fluidity improver, it also improves the adhesion to the substrate.
4. Gypsum slurry: improve water retention and processability, and improve adhesion to the substrate.
5. Joint filler: It is added to joint cement for gypsum board to improve fluidity and water retention.
6. Wall putty: improve the fluidity and water retention of putty based on resin latex.
7. Gypsum Plaster: As a paste that replaces natural materials, it can improve water retention and improve the bonding strength with the substrate.
8. Paint: As a thickener for latex paint, it has an effect on improving the handling performance and fluidity of the paint.
9. Spray coating: It has a good effect on preventing cement or latex spraying only material filler from sinking and improving fluidity and spray pattern.
10. Cement and gypsum secondary products: Used as an extrusion molding binder for hydraulic materials such as cement-asbestos series to improve fluidity and obtain uniform molded products.
11. Fiber wall: Due to its anti-enzyme and anti-bacterial action, it is effective as a binder for sand walls.
About us
Kima Chemical Co.,Ltd. is an important cellulose ethers manufacturer in China,specialized in cellulose ether production,Based in Shandong China, total capacity 20000 ton per year.Our products including Hydroxypropyl Methyl Cellulose (HPMC), Hydroxyethyl Methyl Cellulose (MHEC),Hydroxyethyl Cellulose (HEC),Sodium Carboxy Methyl Cellulose (CMC), Ethyl Cellulose(EC), Redispersible Polymer Powder (RDP) etc ,which can be widely used in construction, tile adhesive,dry mixed mortar , wall putty,Skimcoat, latex paint, pharmaceutical, food,cosmetic,detergent etc applications.
What is Our Product?
Hydroxypropyl Methylcellulose (HPMC)
Methyl Hydroxyethyl Cellulose (MHEC)
Hydroxyethyl Methyl Cellulose (HEMC)
Hydroxy Ethyl Cellulose (HEC)
Sodium Carboxy Methyl Cellulose (CMC)
Redispersible Polymer Powder (RDP)
What is our Product Application?
Construction Additives, Tile adhesives,
Dry-mix mortar, Skim coat, Wall putty,
Gypsum plaster,Cement plaster
Detergent,
Pharmaceutical excipients,
Food additive,
What is our Production Market?
Europe, China, South East Asia, Middle east, South America
What is Our Service?
1.We can produce various grades of cellulose ethers product, both pharma, food, industrial grade, it can meet clients requirement of different application fields.
2.We are using unique cellulose ether manufacture process and equipment from Europe, which assure product quality more stable in different batches.
3.We can also design the product according to customer requirement. We understand the individual needs of our customers and it allow us to meet the requirements individually, and we help to provide value-added services to improve their process and finished products.
Package:
25kg paper bags with PE inner ;
20'FCL load 12ton with pallets,13.5ton without pallets;
40'FCL load 24 ton with pallets,28 ton without pallets;
Methyl Hydroxyethyl Cellulose(MHEC) is also known as Hydroxyethyl Methyl Cellulose(HEMC), it is non-ionic white methyl cellulose ether, It is soluble in cold water but insoluble in hot water. MHEC can be used as high efficient water retention agent, stabilizer, adhesives and film-forming agent in construction, tile adhesives,cement and gypsum based plasters,liquid detergent ,and many other applications.
Physical and chemical properties:
Appearance: MHEC is white or almost white fibrous or granular powder; odorless.
Solubility: MHEC can dissolve in cold water and hot water, L model can only dissolve in cold water, MHEC is insoluble in most organic solvents. After surface treatment, MHEC disperses in cold water without agglomeration, and dissolves slowly, but it can be quickly dissolved by adjusting its PH value of 8~10.
PH stability: The viscosity changes little within the range of 2~12, and the viscosity decreases beyond this range.
Granularity: 40 mesh pass rate ≥99% 80 mesh pass rate 100%.
Apparent density: 0.30-0.60g/cm3.
MHEC has the characteristics of thickening, suspension, dispersion, adhesion, emulsification, film formation, and water retention. Its water retention is stronger than that of methyl cellulose, and its viscosity stability, mildew resistance, and dispersibility are stronger than that of hydroxyethyl cellulose.
Chemical Specification
| Appearance | White to off-white powder |
| Particle size | 98% through 100 mesh |
| Moisture (%) | ≤5.0 |
| PH value | 5.0-8.0 |
Products Grades
| Methyl Hydroxyethyl Cellulose grade | Viscosity (NDJ, mPa.s, 2%) | Viscosity (Brookfield, mPa.s, 2%) |
| MHEC MH60M | 48000-72000 | 24000-36000 |
| MHEC MH100M | 80000-120000 | 40000-55000 |
| MHEC MH150M | 120000-180000 | 55000-65000 |
| MHEC MH200M | 160000-240000 | Min70000 |
| MHEC MH60MS | 48000-72000 | 24000-36000 |
| MHEC MH100MS | 80000-120000 | 40000-55000 |
| MHEC MH150MS | 120000-180000 | 55000-65000 |
| MHEC MH200MS | 160000-240000 | Min70000 |
Application Field
1. Cement mortar: improve the dispersibility of cement-sand, greatly improve the plasticity and water retention of mortar, have an effect on preventing cracks, and can enhance the strength of cement.2. Ceramic Tile adhesives: Improve the plasticity and water retention of the pressed tile mortar, improve the adhesive force of the tile, and prevent chalking.
3. Coating of refractory materials such as asbestos: As a suspension agent, fluidity improver, it also improves the adhesion to the substrate.
4. Gypsum slurry: improve water retention and processability, and improve adhesion to the substrate.
5. Joint filler: It is added to joint cement for gypsum board to improve fluidity and water retention.
6. Wall putty: improve the fluidity and water retention of putty based on resin latex.
7. Gypsum Plaster: As a paste that replaces natural materials, it can improve water retention and improve the bonding strength with the substrate.
8. Paint: As a thickener for latex paint, it has an effect on improving the handling performance and fluidity of the paint.
9. Spray coating: It has a good effect on preventing cement or latex spraying only material filler from sinking and improving fluidity and spray pattern.
10. Cement and gypsum secondary products: Used as an extrusion molding binder for hydraulic materials such as cement-asbestos series to improve fluidity and obtain uniform molded products.
11. Fiber wall: Due to its anti-enzyme and anti-bacterial action, it is effective as a binder for sand walls.
About us
Kima Chemical Co.,Ltd. is an important cellulose ethers manufacturer in China,specialized in cellulose ether production,Based in Shandong China, total capacity 20000 ton per year.Our products including Hydroxypropyl Methyl Cellulose (HPMC), Hydroxyethyl Methyl Cellulose (MHEC),Hydroxyethyl Cellulose (HEC),Sodium Carboxy Methyl Cellulose (CMC), Ethyl Cellulose(EC), Redispersible Polymer Powder (RDP) etc ,which can be widely used in construction, tile adhesive,dry mixed mortar , wall putty,Skimcoat, latex paint, pharmaceutical, food,cosmetic,detergent etc applications.
What is Our Product?
Hydroxypropyl Methylcellulose (HPMC)
Methyl Hydroxyethyl Cellulose (MHEC)
Hydroxyethyl Methyl Cellulose (HEMC)
Hydroxy Ethyl Cellulose (HEC)
Sodium Carboxy Methyl Cellulose (CMC)
Redispersible Polymer Powder (RDP)
What is our Product Application?
Construction Additives, Tile adhesives,
Dry-mix mortar, Skim coat, Wall putty,
Gypsum plaster,Cement plaster
Detergent,
Pharmaceutical excipients,
Food additive,
What is our Production Market?
Europe, China, South East Asia, Middle east, South America
What is Our Service?
1.We can produce various grades of cellulose ethers product, both pharma, food, industrial grade, it can meet clients requirement of different application fields.
2.We are using unique cellulose ether manufacture process and equipment from Europe, which assure product quality more stable in different batches.
3.We can also design the product according to customer requirement. We understand the individual needs of our customers and it allow us to meet the requirements individually, and we help to provide value-added services to improve their process and finished products.
Package:
25kg paper bags with PE inner ;
20'FCL load 12ton with pallets,13.5ton without pallets;
40'FCL load 24 ton with pallets,28 ton without pallets;
