Audited Supplier
FL-P05
ISO, RoHS, CE
Highway,Street,Square,Road
Steel
Round,Octagonal,Polygonal,Single-Arm,Double-Arm
Hot-DIP Galvanized
Optional
Q235B/A36/Q345b/A572,Q460, ASTM573 Gr65, Gr50
Advanced Submerge-Arc Welding Technology
3m to 12m Street Light Pole Height
Available
1 PC
Conical,Square,Round,Octagonal Optional
En ISO 1461 or Equivalent
En 1011 or Equivalent
En 40-5 or Equivalent
Customized
Customized
7m/S or Customized
2.5mm-4mm
FOREVELIT
Bubble Packing+Blanket Packing
9M
China
94059900
Product Description
Pole Shaft -Tapered,octagonal .square etc for option.
Pole Top - A removable top cap is provided for poles
receiving drilling patterns for side-mount luminaire arm assemblies. Other pole top options include Tenon Top, Top Cap
Only or Open Top which is typical when the pole top diameter
matches the necessary slip-fit dimensions.
Hand Hole - A covered hand hole with hardware and
grounding provision are provided,also called maintenance door.Anchor Base & Cover - Optional for decorative base as special order.
Anchor Bolts -This part optional.
Material:engineering steel Q235,hot-dip galvanized/non galvanizedfor alternative.But mostly is non galvanized.
Folding anchor bolts to save the space is available.
Hardware - All nuts and screws are SS201 or SS304.
Finish - Finishes include hot-dip galvanized or passivation
and painted. Please consult factory for special finishing colors and fixture matching options. When storing light poles outside,
remove all protective wrapping immediately upon delivery to
prevent finish damage.
Design Criteria - Standard EPA (Effective Projected Area) and
weight values are based on Standard Commercial Criteria for side and top mounted fixtures only. Satisfactory performance
of light poles is dependent upon the pole being properly
attached to a supporting foundation of adequate design.
| Height | 9 meter street light pole | |
| Diameter | 9m Conical street light pole | 9m Octagonal street light pole |
| 76*170*3.5mm | 76*175*3.5mm | |
| Apply in | Highway, freeway, Airport ,seaport,plaza,stadium ,square,highway,street way etc | |
| Shape | Conical, octagonal, square, cylinder | |
| Material | Usually Q345B/A572, Q235B/A36, Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, ST52 | |
| Lamp power | 20 W- 400 W (HPS/MH) 220V (+-10%) /50Hz | |
| Tolerance of the dimension | +- 2% | |
| Optical assembly of lighting fixture | IP 65 | |
| Electroshock resistant protective grade | Grade one | |
| The casing anti-corrosion performance | Class two | |
| Working atmosphere of lighting fixture | -35 °C~+45 °C | |
| Surface treatment | Hot dip galvanized Following GB/T13912-92 standard, color polyester power or any other standard by client required. | |
| Joint of Poles | Insert mode,inner flange mode,face to face joint mode | |
| Design of pole | Against earthquake of 8 grade | |
| Wind Speed | 160 Km/Hour | |
| Minimum ultimate tensile strength | 490 mpa | |
| Max ultimate tensile strength | 620 mpa | |
| Standard | ISO 9001 | |
| Length of per section | Within 12m once forming without slip joint | |
| Welding | We has past flaw testing.Internal and external double welding makes the welding beautiful in shape | |
| Thickness | 1 mm to 30 mm | |
| Production Process | Raw material test → Cutting →Molding or bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →Calibration → Galvanization or powder coating ,painting →Recalibration →Thread →Packages | |
| Packages | Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required , each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data. | |
| Style | Size and styles are veriable as per customer requestManufacture Process | |
