Audited Supplier
CHB38S-E
Rotary Encoder
Incremental
Contact
Photoelectric Type
Voltage Output
Large Diameter Type
SMD
Axle Sleeve Type
C-Lin
Servo Installation Type
Ф6mm
0-100kHz
Side
6000r/Min
C-lin
Standard Export Packing
Dia. φ 38mm
China
8543709990
Product Description
CHB38S series rotary encoder is a rotational speed and displacement sensor integrating optical, mechanical and electrical technologies. When the encoder shaft drives the grating disk to rotate, the light emitted by the light-emitting element is cut into intermittent light by the slit of the grating disk and is received by the receiving element, which generates signals to be processed by the subsequent circuits and outputs pulses or code signals.
1.Small size, many varieties, Full-featured.
2.Stable performance: internal electronic components SMT chip process, stable and reliable performance.
3.Lightweight and sturdy: the shell is made of aluminum material, lightweight and sturdy, strong practicality.
| CHB38S series | |
| Model | CHB38S-E(100,200,300,360,400,500,600, 800,1000,1024,1200,2000,2500) |
| Main size | External diameter:φ38mm; Shaft diameter:φ6mm |
| Working power | DC5V-24V |
| Current consumption | ≤ 60mA |
| Output mode | E: Voltage output |
| Pulse output | 100,200,300,360,400,500,600, 800,1000,1024,1200,2000,2500 |
| Output phase | A B Z or A B Z -A -B -Z |
| Termination mode | G:Side entry cable |
Application | Bending machines, solar cutting machines, glass machinery and food packaging industry |
Working principle
Outline size
1. This product is consists of high-precision parts, be sure to handle with utmost care, do not drop.
2. When mounting this product, if decentering tolerance or declination tolerance is too big, may result in reduce its working life.
3. Make sure that the product is free from impact, vibration, corrosion, high magnetic field, high temperature, high humidity and acid-alkaline environment.
4. Unnecessary pulses are output when turn ON or OFF, be sure to turn ON the peripheral devices connect to the encoder 0.5S after turning ON the encoder, and turn OFF the peripheral devices 0.5S before turning OFF the encoder.
5. After wiring the cable with the encoder securely, do not pull the cable with 29.4N or more.
6. If it is near to high voltage line or power supply cable, please use cable tube to cover the wires.
7. When wiring the cable, be sure no short connect between each cable, do not make mistakes in the wiring, otherwise the encoder may be damaged. It is suggest to make proper insulation for the cable which is not required for connection
