Audited Supplier
3MK135H
Internal Grinding Machine
Bearing
Grinding Wheel
CNC
Automatic
Bearing Special Grinding Machine
High Precision
CE, ISO 9001
New
CHANGYI
Waterproof Film Wrapped Around,Wooden Case Package
1800*1500x2000
Wuxi, China
Product Description
3MK136H CNC Bearing special internal grinder
Stability, high rigidity
- Redesign the bed, carriage and other basic components, reduce the center of gravity, increase the length and width appropriately, and increase the stability of the basic components.
- HT300 material is used for medium and large castings such as bed, carriage and box, QT450-10 is used for medium and small castings, resin sand casting and electric furnace casting.
With built-in motorized spindle
- The work piece shaft adopts the built-in electric spindle.
- The grinding wheel shaft of the internal groove machine tool adopts the electric spindle.
Generality
- The main parts of the machine tool with two grooves and one hole and multi series of the same specification, as well as the general tooling, are suitable for the production of small batch and multi varieties of machine tools.
- The machine parts of the same series with different specifications are common.
- Large stroke of carriage sliding table - improve the adaptability and range reservation of the whole machine tool. Through the increase of trapper travel, we can better meet the special needs of customer service, and reserve the processing range of the equipment.
- Optimization design of main parts Dresser, electromagnetic center less fixture, work piece spindle are redesigned to improve the accuracy. Reduce hydraulic use Loading and unloading, manipulator, finisher components cancel or reduce the use of hydraulic, pneumatic or servo control instead.
- Filter at the inlet and outlet of the hydraulic station - improve the cleanliness of the oil products and prevent the blockage of the oil circuit from affecting the production.
Internal cleaning of machine tool
- Install a new device around the bed to ensure that the grinding wheel ash and other wastes are washed clean at any time.
- Install the cleaning water gun. The control system has a variety of options such as CNC system Siemens 808D, Siemens 828, FANUC Oi, etc., and Mitsubishi FX series, q series PLC can be selected; or other control systems can be improved according to the special requirements of customers.
- Automatic protection system of electric cabinet door - it indicates the protection level of electrical components and reduces the possibility of electrical damp alarm.
- Informationalization of the whole connection -- through the configuration control of the connection equipment, the production management personnel can simplify the extraction of the required information
1. Information extraction and management of one or several related equipment through configuration software, such as production beat, bottleneck process analysis, machine tool spindle power analysis and production quantity load statistics. 2., the early stage of the future development of information automation plant will be laid down by configuration connection, and the development trend of Internet plus and industry 4 will be met.
CNC deep groove ball bearing inner ring groove grinder
| Model No. | 3MK136H |
| ID of work piece | Φ20-60mm |
| Width of work piece | 10-30mm |
| Fixture mode | Electromagnetic centerless type |
| Size precision | P4/P5 processing accuracy |
| Grinding wheel linear speed | Max. 60M/S |
| Spindle power | Electric spindle, dynamic and static pressure spindle unit, bearing spindle unit |
| move unit | Cross ball guide, ball screw and servo motor |
| Dress unit | Single point diamond pen finisher or diamond roller finisher |
| Hydraulic | 1.2-2.2Mpa |
| Air pressure | 0.3-0.8Mpa |
| Cooling hydraulic | 0.2-0.5Mpa |
| Cooling flow amount | 100-200L/min |
| Weight of machine tool(kg) | 5000 |
