Audited Supplier
Cable Automatic Coiling and Wrapping Machine with Robotic Stacking Arm
This equipment is suitable for cable automatic coiling and wrapping, which would be packaged into a coil and can be connected to the cable extrusion machine for linkage use.
- Use PVC/PE film, high-speed coiling and wrapping
- The film roll loading method is pneumatic clamping
- PVC/PE/PP film size:Thickness 0.05-0.07mm * width 40-50mm
- Adopt touch screen interface (man-machine interface) operation is simple and convenient
- Wire arm type, driven by AC motor, rotating reel smoothly
- Use electric method to adjust the size of the holding arm, fast and convenient
- Equipped with automatic label feeding mechanism, which can automatically pick up a label and send it to the coil
- With PLC system, high stability and convenient operation, and 99 sets of different coil packaging specifications can be memorized. When the product specifications are changed, only the memory data needs to be read, and the production can be done immediately without adjustment and testing.
- There are convenient and stable instruments and switches on the operation panel: touch screen, speed adjustment button, emergency switch, etc.
Configuration:
630-800 Magnetic Powder Type Payoff Stand + Wire Straightening Device + PLC Automatic 1860 Coiling And Wrapping Main Machine
| 630-800 Magnetic Powder Type Payoff Stand | 1. Type:No axis cone 2. Bobbin Lift:1HP Motor + Drive Screw Lift 3. Shaft Diameter:PD 630-800 |
Parameters:
1240:
| Coiling Speed | 800 RPM |
| Coiling Size | Outside diameter is 200-460mm, height is 50-120mm, Inner diameter is 140-220mm |
| Applicable Wire Range | 1-12mm |
| Power Supply | AC 380 V, three-phase, 50 HZ or customized |
| Operation Direction | Left or right side(Can be customized) |
| Packaged Coil Weight | MAX 35 kg |
1860:
| Coiling Speed | 700 RPM |
| Coiling Size | Outside diameter is 220-600mm, height is 60-180mm, Inner diameter is 180-250mm |
| Applicable Wire Range | 5-15mm |
| Power Supply | AC 380 V, three-phase, 50 HZ or customized |
| Operation Direction | Left or right side(Can be customized) |
| Packaged Coil Weight | MAX 50 kg |
| Effective load | Max.50 KG |
| Structure | tandem |
| Axis number | 6 axis |
| Repeated positioning accuracy | <±0.15 |
| Max working range | ±180° |
| The second axis | +80°/-135° |
| The third axis | +225°/-80° |
| The fourth axis | ±360° |
| The fifth axis | ±120° |
| The sixth axis | ±450° |
| Way of installation | floor / rack |
| 1 | Automatic packaging, wrapping and labeling |
| 2 | Packing label capacity 7 times more than manual |
| 3 | 200m per coil and coiling speed 4 times more than manual |
| 4 | Can be directly connected to the extrusion machine |
| 5 | Servo motor flat cable system, perfect packing |
| 6 | Automatic warning system, easy control of the operation |
| 7 | 99 types of the coiling storage and can change as you like |
| 8 | Touch screen man-machine interface operation, all circuit control adopt microcomputer programmable controller |
| 9 | Cable row system adopt servo motor wiring system, the speed as the same as the main machine |
| 10 | The meter count is close to the accuracy of 0.01,forecast slow down the speed, automatic coiling renew. One coil can be set and close to 0.2% accuracy |
| 11 | The machine PLC contacts with power frequency spark machine for the spark of BV line detection, can automatic spark breakdown point or artificial mark continue knitting function or automatic increase 5 meters length into a circle |
| 12 | The machine PLC contacts with caliper gauge. Diameter is not up to standard can be automatically eliminate waste line or artificial marking after continue to function |
Rich export experience:
2003 Engaged in extrusion machine and bunching machine project
2005 Engaged in drawing machine project
2007 Launched out into tube stranding machine, frame stranding machine, laying up machine project
2008 Specialized in providing turnkey service of the whole cable plant project
2010 Specialized in up casting project and continuous casting and rolling project
2015 Specialized in supplying wire and cable, and testing equipment
2017 Committed to supplying raw materials such as metal materials including copper,aluminum etc., and insulation materials including PVC, PE, XLPE, aluminum foil and so on
2019 Dedicated to providing integration service covering the whole cable and wire industry chain
All-around Service:
HOOHA CO., LTD. Is collection of wire and cable factory build, cable raw material supply, cable equipment layout, cable factory operations, cable technology export, cable manufacturing workers training, cable testing laboratory construction group company.
Our aim: Save money, save time and save worry for customer cable manufacturing investment
Our goal: Provide the better professional, systematic, customized service for customer cable manufacturing
Our ideal: Share to win, grow together
What can HOOHA provide
1.Professional and customized wire and cable solutions
2.Suggestions and guidance of the overall cable factory operation
3.Overseas on-site installation and operation instruction
4.Cost accounting service of raw materials and accessories
5.Cost accounting service of overall production operation
6.Talent delivery and training service
7.Lifetime after-sales online consultation service
8.Maintenance, reconstruction and upgrade services of the overall equipment
9.Additional support, such as raw material or accessories supply and suggestions, etc.
