Audited Supplier
S7045
Hardening Accelerator Based Calcium-Silicate-Hydrate (C-S-H) Seeding Technology S7045
 | 7045, as a professional and efficient early strength agent, the scientific principles and technical details behind it are quite eye-catching. The core component of this early strength agent is nano-seeds based on hydrated calcium silicate, which is presented in the form of fine powder. It is specially designed to play a significant reinforcing role in the critical stage of cement construction, that is, the initial hydration process of cement (specifically within 24 hours). During the mixing and curing process of cement slurry, S7045 nano-seeds play a catalyst-like role. Once added to the cement slurry, these tiny nano-seeds begin to play their unique inductive role, prompting the generation and growth of hydrated calcium silicate. This induction is not just a simple physical process, but also involves a series of complex chemical reactions. Under the "guidance" of nano-seeds, the generation rate of hydrated calcium silicate has been significantly improved, thereby greatly accelerating the speed of the entire hydration reaction. This accelerated hydration reaction is crucial to the early strength development of cement. In construction projects, the early strength of cement often determines the construction progress and the temporary support capacity of the structure. By using S7045 early strength agent, the strength of cement can be significantly improved in a short time, providing a solid foundation for subsequent construct |
In today's construction industry, which is increasingly pursuing efficiency and quality, S7045, as a unique cement hardening accelerator, has won wide recognition in the market for its excellent performance. Its uniqueness lies in that it can significantly promote the hardening process of cement under various temperature conditions, especially in low temperature environments, thereby greatly improving construction efficiency.
| Appearance | gray powder |
| Bulk density | 400-700kg/m3 |
| Water content | ≤ 3% |
| Shelf life | 12 months from the date of production |
Recommended dosage: 0.2% ~ 2.0% of cement mass, according to the type of raw material and the demand for appropriate mixing to determine the appropriate dosage.
(1) It has excellent adaptability, especially suitable for all kinds of cement-based material system.
(2) Various cement mortars and high performance concrete
(3) Cement-based self-leveling materials
(4) Various cement concrete precast components and products
(5) Cement-based grouting materials, compression grouting materials, grouting materials and so on
1. When using, need to be mixed with other dry powder components together, when using according to the construction of different areas of mixing requirements for mixing and construction;
2. The recommended dosage is 0.2% ~ 2.0% of cement mass, and the specific dosage is determined by trial mixing according to the application system and the change of dry mix components;
3. In low dosage when the system has good dispersion and fluidity; when the dosage is greater than 0.3%, the fluidity has a very obvious growth, pay attention to control the accuracy of the dosage.
- Packed in paper-plastic composite bag, 25kg/bag, the storage period is 12 months from the date of production, if it exceeds the shelf life, it must be verified by test and inspection before use;
- Place in a ventilated and dry place for storage, pay attention to moisture-proof treatment, avoid direct sunlight, use it in time after opening, and seal it in time if it is not used up to prevent moisture absorption and deterioration.
1,S7045 Applicable objects?
Suitable for repair mortar, grout, self-leveling, tile adhesive and other high-performance mortar ready-mixed concrete, precast concrete components and other high-performance concrete.
2,What is the minimum order quantity of S7045?
The minimum order quantity is 1 package (25KG), when the quantity is more, the transportation cost will be lower, so the price will be relatively friendly.
3,Samples and technical support?
Our company provides samples for free, the express cost is responsible by the customer, our company has a professional technical team to solve the related problems for the customers, our technical team has been deeply engaged in China's construction industry for 20 years, and has a wealth of experience.
4,Where to ship the samples and goods?
Our factory and company are in Nanjing, Jiangsu Province, and the shipment place is also Nanjing, Jiangsu Province.
