Audited Supplier
CanETN
Orthopedic Implant and Instrument
Orthopedic
Titanium
Disposable
CE, ISO13485
Adult
Canwell
PE Inner Bag+PE Outer Bag+Carton
Diameter 8/9/10/11mm, Length 255-375mm
China
90211000
Product Description
CANWELL MEDICAL
Leading The Way To A Healthy World
Leading The Way To A Healthy World
| Description | Qty. | Description | Qty. |
| Measurement Ruler | 1 | Flexible scrwe driver T30 (screw capture) | 1 |
| Protection Sleeve for Awl | 1 | Nail Extractor | 1 |
| Inner Drill Sleeve | 1 | Nail Extractor Extender | 1 |
| Drill bit Φ12.5 Length 230 | 1 | Cleaning wire | 1 |
| Awl | 1 | Quick coupling handle Suprapatella | 1 |
| Proximal handle | 1 | Sleeve Suprapatella | 1 |
| Bolt connector SW11 Length 120 | 1 | Inner Drill Sleeve Suprapatella | 1 |
| Nail Impactor | 1 | Outer Sleeve Suprapatella, PEEK | 1 |
| Adjustable Connector | 1 | Trocar Suprapatella, PEEK | 1 |
| Connecting bolt | 1 | Proximal handle Suprapatella | 1 |
| Targeting shaft | 1 | Drill bit D12.5 Suprapatella | 1 |
| Targeting shaft, distal | 1 | Bolt connector SW11 Suprapatella | 1 |
| Location shaft,distal,radiolucent | 1 | Compression pin Suprapatella | 1 |
| Outer sleeve, distal location shaft | 1 | Wrench Hexagon | 1 |
| Inner Drill sleeve, for 3.8 drill bit | 2 | Quick coupling handle | 1 |
| Trocar | 1 | Drill sleeve, for 5.2 drill bit | 1 |
| Outer sleeve, for 3.8, 4.3 drill bits | 2 | Trocar | 1 |
| Drill bit 3.8 | 2 | Drill bit 5.2 | 1 |
| Location shaft | 1 | Instrument tray | 1 |
| Drill bit 5.2 | 1 | Screwdriver T30 | 1 |
| Quick coupling screw driver T30(screw capture) | 2 | Guide wire, threaded | 4 |
| Drill sleeve, for 4.3 drill bit | 2 | Guide wire | 2 |
| Trocar | 1 | Impactor hammer | 1 |
| Drill bit 4.3 | 2 | Depth gauge | 1 |
| Compression pin | 1 | Total amount | 1 |
CANWELL Medical
A medical device company founded in 1994 is now one of China's largest designers, manufacturers, and suppliers of orthopedic implants and instruments. We have over 60,000 square meters of workshop. We are a long-term instrument contract manufacturer of USA top orthopedic companies. Our Canwell own brand product lines include traumatology, spinal fixation system, and surgical instrument, covering products such as femoral nails, titanium plates, and screws, pedicle screws with rods, PEEK cages, balloon kyphoplasty for spine fracture, and other instrument sets, already sell in China, Europe, Latin America, the Middle East, and Asia...
Q: Would you please give some information on shipping mode and charges?
A: Normally we send through courier, or post upon request from clients.
Q: Do you have ISO 9001, CE ?
A: Yes, we are an ISO 9001:2008 and EN ISO 13485:2012 Certified Company. We have a CE mark for many of our products.
Q: What is the minimum order that we can place?
A: We expect your minimum orders to be least at US$1000. However, we understand that customers need to place smaller sample orders in the beginning in order to test market our products. Samples against cost are available on request.
Q: Can I buy products not shown but similar to your catalogue?
A: Of course you can, just send us pictures or samples. But this takes a little longer time for delivery.
Q: Do you have stock for the listed products, or they are newly produced?
A: Generally, we have stock for every listed product, which is produced monthly. But it depends on our sales condition. Better to ask our salesman for accurate inventory information.
A: Normally we send through courier, or post upon request from clients.
Q: Do you have ISO 9001, CE ?
A: Yes, we are an ISO 9001:2008 and EN ISO 13485:2012 Certified Company. We have a CE mark for many of our products.
Q: What is the minimum order that we can place?
A: We expect your minimum orders to be least at US$1000. However, we understand that customers need to place smaller sample orders in the beginning in order to test market our products. Samples against cost are available on request.
Q: Can I buy products not shown but similar to your catalogue?
A: Of course you can, just send us pictures or samples. But this takes a little longer time for delivery.
Q: Do you have stock for the listed products, or they are newly produced?
A: Generally, we have stock for every listed product, which is produced monthly. But it depends on our sales condition. Better to ask our salesman for accurate inventory information.
