Audited Supplier
CAP-201sr Tabletop PLC Training System
CAP-201sr Tabletop PLC Training System.It has the following advantages:
(1)Structure
• The rear side of the trainer adopts a flip-open structure, and up to 6 (or 3) modules can be placed for storage.
• It uses a standard aluminum profile and has a built-in handle.
• The side sections are used for quick motion trainers to free up placement constraints of the system.
(2)Installation
All terminals lead to safety sockets and experimental pluggable cables and steel cable racks are connected to the main frame.
(3)Components
Execute different PLC controllers in one controller training platform.
(4)Flexibility
Attached to the top together with the PLC unit is an ordinary power box, and they can all be detached from the host for easy-delivery, maintenance and replacement.
(5)Funcation
• Provides a variety of control and simulation units to form a comprehensive programming training system.
• Users can easily and freely select modules and create targeted experiments.
| 1. Frame part | - Cable holder with 12 slots - Connectors for main frame with power/PLC units - Size: 810*540mm*440mm (approx.) |
| 2. AC/DC Power supply unit | - Input: single phase AC 220V ±10% with ON/OFF switch and voltage indication - Fixed 24VDC power output: max. 6.5A with ampere meter - Variable DC power output: 0…24VDC output, max. 4A. with DVM, coarse/fine ADJ |
| 3. PLC unit | - With all I/O leading to 25-pin serial connector - Standard Siemens SIMATIC S7-200 SMART relay type - Digital input/output: 32 inputs, 32 outputs - Ethernet / RS485 communication with additional serial port - 85...264V AC, 47...63Hz |
| 4. Input and output panel | - 32 inputs / 32 outputs 4mm sockets - 8 common sockets (0/24V) - 4-25 pin connector |
| 5. Accessories | - Cable suite: 4mm, conductor cross section: 16AWG tinned copper wire, 3kV, 20A, with axial socket - STEP 7 programming software (copied on CD) |
| 6. Portable air compressor | - Motor: 1/5 HP, max pressure 6Bar (86Psi) - Airflow: 30-35L/min - Speed: 1450RPM(50Hz), 1700(60Hz) - Weight: 5Kg - Tank: 3.0L - Auto stop 4Bar (57Psi), auto start 3bar (43Psi) - Size: 310mm*135mm*310mm |
| (1)Emergency stop and alarm control | (5) Slider round-trip of relay controlled DC motor | (9)Stepper motor angle control |
| (2)Traffic light signal control | (6) Digital switch and digital display | (10)Encoding and digital display |
| (3)Sensor and digital display | (7)Motor speed measurement and digital display | (11)Counting and digital display |
| (4)Cylinder control | (8) PLC input / output data HMI control |
>> CUSTOMIZATION
We support: logo customization, packaging customization, Graphic customization.(Min. order 1 set)
>> Port: Ningbo, Shanghai, or any ports in China
>> LEADING TIME
| Quantity (sets) | 1 - 50 | >50 |
| Time (days) | 30 | To be negotiated |
https://choieo-education.en.made-in-china.com/product/LTEYyprJFDVU/China-CF-102-Double-Sided-Hydraulics-and-Pneumatic-Trainer-Education-Training-Equipment.html
https://choieo-education.en.made-in-china.com/product/IGKUmwfVbuWZ/China-Cap-514-Modular-Mechatronics-Trainer-for-Education-and-Training.html
We have worked for many years with experienced freight forwarders who arrange shipments. Whether by courier, air or sea, we will follow the shipment through the entire process to ensure that it reaches you on time and in perfect condition.
Wenzhou Qiaoou Education Technology Co., Ltd. was established on January 22, 2019, with its registered address located in Heyi Village, Oubei Street, Yongjia County, Wenzhou city, Zhejiang Province.
Its business scope includes research and development, installation and sales of education software; Design, development and installation of teaching equipment, teaching instruments, teaching models, teaching training equipment, laboratory equipment, instruments and meters, professional skill appraisal equipment, intelligent manufacturing training equipment; Hardware products, metal products, low-voltage electrical equipment, office equipment, mechanical equipment, computer software and hardware research and development; Import and export of goods and technologies.
The company set independent production and import and export trade in one, specializing in vocational and technical education equipment export. The company has a young team, good technical reserves and long-term customer resources.
>> Company Environment
>> Meeting with Clients
>> Clients Training
>> Company Certificate
1. Are you a trading company or manufacturer?
A:We are a factory. We specialize in vocational training equipment in China for 8 years, our products include AutomationTrainer, Hydraulic and Pneumatic Trainer, Renewable Energy Trainer, PLC Technology Trainer etc.2. How long is your delivery time?
A:If it is in stock, it usually takes 10-15 days. Or if the goods are not in stock, it is 30-50 days, it is based on quantity.
3. Can I have my own logo on the product?
A: Of course, we provide OEM service, we can according to your requirements.
4. How do you ensure product quality?
A: We have 8 years of experience, we have a strict quality control system during the production process and test each finished product before product packaging.
5. Can you give warranty of your products?
A: Yes, we extend a 100% satisfaction guarantee on all items. Please feel free to feedback immediately if you are not pleased with our quality or service. For the overseas orders, we guarantee most accessories. Provided emails with details including pictures or short video, we will send guide manual or replacements at our cost to repair.
6. Do you provide OEM & ODM services?
A: Yes, we can do according to your requirement.
If you don't find the exact product which you need from our website, please feel free to contact us directly, we have a professional technical team and service team, we have ability to customize your products according to your requirements!
