Audited Supplier
| 14 Seater Fuel Sightseeing vehicle | ||
| Size and quality | Number of passengers (including driver) persons | 14 |
| Length*width*height(mm) | 5380*1650*2010 | |
| Wheelbase(mm) | 3420 | |
| Wheel base(front/rear)(mm) | 1350/1310 | |
| Complete vehicle equipped mass(kg) | 1060 | |
| Total mass(kg) | 2280 | |
| Driving part | Engine | 4A13 electric injection engine |
| Tank capacity | 55l | |
| Displacement | 1.3L | |
| Gearbox | Five-speed shift | |
Front and rear suspension | McPherson type independent suspension, leaf spring type non-independent suspension + cylinder type hydraulic shock absorbers | |
Rear axle | Integral rear axle + cylinder shock absorbers | |
Transmission technology | Industry automotive drive shaft technology | |
Performanceparameters | Maximum speed (full load) | 30-50Km/h |
Minimum turning radius | 6.5m | |
Maximum climb (full load) | ≥18% | |
Braking performance (initial speed 20km/h) | 5m | |
Minimum clearance from ground (no load/full load) | 150/120mm | |
Bodyconfiguration | Chassis | Automobile painting process, integrated chassis, whole vehicle pickling, phosphating treatment, anti-corrosion frame |
Steering System | Rack and pinion automotive steering system, electronic direction assist | |
Suspension system | Front axle McPherson independent suspension, rear axle leaf springs | |
Braking performance | Dual circuit hydraulic brake, vacuum power brake | |
Tires | 155R13 automotive vacuum tires | |
Body | Automotive craft sheet metal body | |
Front windshield | Double glazing for cars | |
Ceiling | Press forming + welding process. Pickling, phosphating treatment, cathodic electric permanent paint,corrosion and rust prevention process | |
| seat | Use an adjustable car seat + leather seat | |
User-friendly configuration | Car stereo, radio | |
| Instrument desk | The industry's only injection car instrument, car special wiper | |
Lights and Signals | Headlights, turn signals, brake lights, parking lights, car lights, car horns, rearview mirrors | |
Full-sheet metal productions,simple body repair and convenience Super mileage let you worry-free throughout!
The ergonomic cab design gives the driver an excellent sense of handling
Customer customized production, diversified modeling
Certifications
quality guarantee
1.Our company guarantees that the supplied vehicles are brand new, unused original qualified products, and ensure that the provided vehicles have good performance during their service life under normal maintenance conditions of correct installation and normal use.
2.Our company is committed to the quality standards of the supplied vehicles in accordance with the relevant national quality and technical standards and relevant laws and regulations and provisions of the implementation of the requirements, and not lower than the original manufacturer's quality assurance regulations and relevant supply standards for the supply of counterfeit and shoddy products.
after-sales service
1.Promise to provide permanent maintenance services, vehicle warranty for one year, after the warranty period to provide paid services.
2.Regular return visit maintenance: Telephone return visit every 3 months, timely understanding of the buyer's opinions and suggestions, in order to promote the company's after-sales service work to further improve.
After-sales process
1.The customer provides product information, unit information and contact information by telephone or email message, and describes the cause of the problem to the manufacturer.
2.After receiving the information, the manufacturer will try to deal with it as soon as possible.
3.Provide a solution to the problem described by the customer until the customer is satisfied.
Workshop pictures
