Audited Supplier
Technical Specification
| Product Parameters | ||||||||||
| The product can be customized, and the parameters is for reference only. | ||||||||||
| Model | Rated Capacity | Connections | Voltage Combination(kV) | No-load Loss | Load Loss | No-load Current | Impedance | |||
| (kVA) | (W) | (W) | (%) | (%) | ||||||
| High Voltage | Tapping Range | Low Voltage | 120ºC(F) | |||||||
| SC13-30 | 30 | Yyn0 | 10 | ±5% | 0.4 | 135 | 640 | 2 | 4 | |
| SC13-50 | 50 | or | 6.3 | ±2×2.5% | 195 | 900 | 2 | |||
| SC13-80 | 80 | Dyn11 | 6 | or | 265 | 1240 | 1.5 | |||
| SC13-100 | 100 | +3/-1×2.5% | 290 | 1410 | 1.5 | |||||
| SC13-125 | 125 | 340 | 1660 | 1.3 | ||||||
| SC(B)13-160 | 160 | 385 | 1910 | 1.3 | ||||||
| SC(B)13-200 | 200 | 445 | 2270 | 1.1 | ||||||
| SC(B)13-250 | 250 | 515 | 2480 | 1.1 | ||||||
| SC(B)13-315 | 315 | 635 | 3120 | 1 | ||||||
| SC(B)13-400 | 400 | 705 | 3590 | 1 | ||||||
| SC(B)13-500 | 500 | 835 | 4390 | 1 | ||||||
| SC(B)13-630 | 630 | 965 | 5290 | 0.85 | ||||||
| SC(B)13-630 | 630 | 935 | 5360 | 0.85 | 6 | |||||
| SC(B)13-800 | 800 | 1090 | 6260 | 0.85 | ||||||
| SC(B)13-1000 | 1000 | 1270 | 7310 | 0.85 | ||||||
| SC(B)13-1250 | 1250 | 1500 | 8720 | 0.85 | ||||||
| SC(B)13-1600 | 1600 | 1760 | 10500 | 0.85 | ||||||
| SC(B)13-2000 | 2000 | 2190 | 14300 | 0.7 | ||||||
| SC(B)13-2500 | 2500 | 2590 | 17000 | 0.7 | ||||||
NOTICE !
Please tell us the imformation before your ording. The imformation include:
1. Prefabricated substation type;
2. Transformer model and capacity;
3. High and low voltage circuit main wiring scheme;
4. Types and parameters of electrical components with special requirements;
5. Shell Color;
6. Names, quantities and other requirements of spare parts and spare parts;
Features
Low consumption and energy saving:The iron core made of amorphous alloy material has low no-load loss and no-load current, equivalent to 30% of silicon steel sheet. The no-load loss of amorphous alloy dry-type transformer is 75% lower than the value stipulated in GB/T10228, which can greatly reduce the operation cost and the energy-saving effect is remarkable. Strong corrosion resistance: non-product alloy iron core through the resin and high-temperature silicone for full encapsulation treatment to effectively prevent rust and amorphous alloy fragments fall off, thus effectively protecting the iron core and coil ring low non-sexual amount of electrical noise: in order to reduce the product noise, in the design of the product to choose a reasonable industrial tree product energy pressure for the magnetic flux density, in the processing of the product to improve the structure of the iron core and coils, the use of special noise-reducing water and other materials and processes, the product noise is lower than the national standard GB/T10228, the product noise. The noise of the product is lower than the national standard GB/T10088 requirements of about 5 ~ 15 dB. Lipo flat-measurement level anti-short-circuit capability: the product adopts three-phase three-column structure, the iron core and coil clamping structure is compact and reasonable. Hua change production of non-product alloy dry-type transformer in the domestic first through the type of sudden short-circuit test. Low discharging: Due to the epoxy resin vacuum casting, the product has low temperature rise, long service life, strong heat dissipation ability, and can run at 150% of the rated load under air-cooled condition. Products equipped with temperature control protection system for amorphous alloy dry-type transformer: transformer safe operation to provide reliable protection.
Working condition.
The height above the sea level is below 1000m;
Highest air temperature +40ºC;
Highest daily average air temperature+30ºC;
Highest annual average air temperature +20ºC;
Lowest outdoor air temperature -5ºC.
Jiangxi Chuanxing is an enterprise mainly engaged in the production and supply of electricity and heat, and its main business scope includes construction engineering, electrical installation services, building intelligent system design, installation, maintenance and testing of hydroelectric power generation, transmission, power supply and power receiving facilities. In addition, the company is also involved in wind power generation technical services, power generation technical services, solar power generation technical services, engineering management services, general machinery and equipment installation services, municipal facilities management, photovoltaic power generation equipment leasing, and sales of generators and generator sets.
What is your MOQ?
Our MOQ is 1 piece.
How long is your delivery lead time ?
It depends on your product requirement and quantity .
What time I can get the quote ?
We ususally quote within 24 hours after we get your inquiry .
Why choose us
Specializing in the design and production of transformers for more than 10 years.According your needs we can customize transformers with different voltages,capacities,and frequencies
