Audited Supplier
2200x6500mm
Ball Mill
AC Motor
320kw
20-22r/min
Mine
Minerals & Stones
New
Raw Mill
15-16t/H
Q235
Mn Steel & Rubber & High Alumina
as Your Requirement
citichl
in Container
52t
China
8474209000
Product Description
China hot selling silica sand grinding raw mill machine
1. Usage of raw mill:
Raw material mill is used widely for grinding (both drying and grinding) cement raw material and other materials in building material, metallurgical, electric and chemical industries.
2. Sorts and Features:
a. Common Raw Mill It is used for small & medium-sized raw materials separating system outside the mill.
b. Air-swept Mill The feature of Air-swept mill is short and thick in shell, wide in diameter of inlet &outlet trunion, large in grate gap area of diaphragms between drying chamber & grinding chamber, no grate plate in mill outlet. therefore, air speed inside of mill could reach 5m/s due to small resistance and drying capacity is strong since large amout of hot air could get in.
c. Outlet Discharging & Lifting Cycle Mill Comparing with Air-swept mill, material, passing through the drying chamber, are discharged at the outlet of grinding chamber by mechanical way, and then fed into separator by elevator which would return the coarse material to mill again for cycle grinding.
d. Middle Discharging & Lifting Cycle Mill From the view of drying, it is the combination of Air-swept Mill & Outlet Discharging & Lifting Cycle Mill; from the view of grinding, I workssimilar to secondary stage cycle grinding system. At the front end, it has drying chamber with high drying efficiency. Materials are fed from mill inlet, returned material from separator are fed through mill inlet & mill outlet into rough grinding chamber & fine grinding chamber respectively.
3. Technicial parameters of raw mill:
1. Usage of raw mill:
Raw material mill is used widely for grinding (both drying and grinding) cement raw material and other materials in building material, metallurgical, electric and chemical industries.
2. Sorts and Features:
a. Common Raw Mill It is used for small & medium-sized raw materials separating system outside the mill.
b. Air-swept Mill The feature of Air-swept mill is short and thick in shell, wide in diameter of inlet &outlet trunion, large in grate gap area of diaphragms between drying chamber & grinding chamber, no grate plate in mill outlet. therefore, air speed inside of mill could reach 5m/s due to small resistance and drying capacity is strong since large amout of hot air could get in.
c. Outlet Discharging & Lifting Cycle Mill Comparing with Air-swept mill, material, passing through the drying chamber, are discharged at the outlet of grinding chamber by mechanical way, and then fed into separator by elevator which would return the coarse material to mill again for cycle grinding.
d. Middle Discharging & Lifting Cycle Mill From the view of drying, it is the combination of Air-swept Mill & Outlet Discharging & Lifting Cycle Mill; from the view of grinding, I workssimilar to secondary stage cycle grinding system. At the front end, it has drying chamber with high drying efficiency. Materials are fed from mill inlet, returned material from separator are fed through mill inlet & mill outlet into rough grinding chamber & fine grinding chamber respectively.
3. Technicial parameters of raw mill:
| Spec./m (Dia.×Length) | Speed(r/min) | Feeding Size(mm) | Capacity(t/h) | Griding Media loading(t) | Main Motor(KW) | Main Reducer | Weight(t) |
| φ2.2×7.0 | 21.7 | <25 | 20~25 | 35 | 380 | ZD70 | 62.5 |
| φ2.2×7.5 | 21.7 | <25 | 22~26 | 35 | 380 | ZD70 | 64 |
| φ2.2×8.0 | 21.5 | <25 | 23~27 | 36 | 475 | ZD70 | 66 |
| φ2.2×9.0 | 21.5 | <25 | 24~28 | 40 | 475 | ZD70 | 69 |
| φ2.4×7.0 | 21.5 | <25 | 24~28 | 36.5 | 475 | ZD70 | 81 |
| φ2.4×8.0 | 21.5 | <25 | 26~30 | 42 | 570 | ZD80 | 86 |
| φ2.4×9.0 | 21.5 | <25 | 28~32 | 47 | 570 | ZD80 | 92 |
| φ2.4×10 | 20.3 | <25 | 30~35 | 52 | 630 | ZD80 | 108 |
| φ2.6×8.0 | 19.7 | <25 | 30~35 | 51 | 630 | MBY630 | 112 |
| JDX630 | |||||||
| φ2.6×9.0 | 19.7 | <20 | 40~45 | 58 | 710 | MBY630 | 120 |
| JDX630 | |||||||
| φ2.6×10 | 19.7 | <20 | 45~50 | 64 | 800 | MBY710 | 130 |
| JDX710 | |||||||
| φ3.0×9.0 | 18.2 | <20 | 50~55 | 78 | 1000 | MBY800 | 158 |
| JDX800 | |||||||
| φ3.0×11 | 18.2 | <20 | 55~60 | 95 | 1250 | MBY800 | 178 |
| JDX800 | |||||||
| φ3.2×10 | 17.8 | <25 | 60~65 | 100 | 1400 | MBY900 | 200 |
| JDX900 | |||||||
| φ3.2×11 | 17.8 | <25 | 70~80 | 110 | 1400 | MBY900 | 215 |
| JDX900 | |||||||
| φ3.4×7.5 | 16.9 | <20 | 50~55 | 80 | 1000 | MBY800 | 178 |
| φ3.4×7.5+1.8 | 16.9 | <20 | 55~60 | 70 | 1250 | MBY800 | 190 |
| φ3.5×10 | 16.8 | <20 | 70~75 | 80 | 1250 | JS110-A | 200 |
| MFY125 | |||||||
| φ3.8×7.5 | 16.5 | <15 | 85~90 | 95 | 1400 | MFY140 | 185 |
| φ3.8×8.5 | 16.5 | <15 | 90~95 | 108 | 1400 | MFY140 | 195 |
| φ4.6×8.5+3.5 | 15 | <15 | 140~150 | 150 | 2800 | MFY280 | 325 |
| JS140-A | |||||||
| φ4.6×9.5+3.5 | 15.1 | <15 | 180~190 | 180 | 3550 | JS150-B | 345 |
| φ4.6×10+3.5 | 15.1 | <15 | 200~210 | 190 | 3550 | JS150-B | 370 |
