China Magnetic Orbital Pipe Welder/Pipe Welding Machine/MIG Welder/Tube Welding Machine/Orbital Welding Tractor for Pipeline Construction Machinery

Pipe welding cars are widely used in petroleum, petrochemical, chemical, thermal, and heaven
Of course
Intovasical, non -abuse type adsorbing magnetic adsorption on the pipeline, welding while welding
Automatic crawling, installation, use and disassembly quickly complete, very convenient; there is
The rail type is mainly used for welding and orbit of stainless steel or pipelines that cannot be magnetized.
The specifications are customized according to welding needs.
Welding car magnetic adsorption on the pipeline, through preset parameters, handheld wired control
The welded welding parameters control the welding car automatically welded on the pipeline.
Features:
The entire position of the pipeline is automatically automatically automatically automatically automatically
Welding, welding process uses high -efficiency, low -cost carbon dioxide gas or mixing
Gas gas protection (80%grillet+20%carbon dioxide).
Performance advantage:
Applicable work conditions: various long -term pipelines, thermal pipelines, buried pipelines or workers
Art channels and other on -site welding mouths.
Welding material: carbon steel, stainless steel, alloy steel, low temperature steel, etc.
Applicable welds: more than 150mm in the pipe diameter, and the wall thickness is greater than 5mm
The pipes can be applicable, and the thick wall tube can use multi -layer and multi -channel welding.
Welded car: The design is light and easy to carry, and the permanent magnet adsorption, special
The pipelines suitable for the entire pipeline at the construction site are welded.
 

Body components: welding gun oscillator, slider, welding gun handle, control box, control panel and other accessories
(1) Swing: drives the welding gun to perform pendulum swing welding
(2) Driving part: the power device for the trolley to move, consisting of four magnetic forces It consists of wheels, helical gears, chains, and sprockets
(3) Slider part: a device for adjusting the position of the welding gun. It can be fine-tuned forward and backward during welding.
(4) Welding gun clamp: a clamping device for the welding gun, which can adjust the angle of the welding gun.
(5) Control box; all movements of the car can be adjusted. For details, please refer to the control panel operation method.

1) Welding/non -welding" switch: Enter the welding preparation status when selecting the "welding" position, and press the "start" switch for welding; press the "start" switch when the "non -welding" position is selected. Essence
(2) Start" switch: The switch is turned on and the car starts to walk. The welding "position is only walking but not welding.
(3) Stop" switch: If you press the stop switch during the trips of the car, all the actions will stop.
(4) Up Down: You can choose to walk up or down.
(5) Walking speed: The speed value is displayed in digital, the maximum walking speed is 1040mm/min, and the digital display value is 999.
(6) Switching speed adjustment knob: Rotate the swing swing speed in clockwise, the maximum value is 1520mm/min. The maximum scale is 10.
(7) swing range: The amplitude of the swing of clockwise rotation increases, and the maximum value is 20mm. The maximum scale is 10.
(8) Stop time adjustment knob: The adjustment range is 0 ~ 2S, and clockwise increases.
(9) Right stop time adjustment knob: The range is 0 ~ 2s, and clockwise increases.
(10) left right center moving: When rotating clockwise, the center will move to the right, and the center will move to the left when the clockwise rotation counterclockwise, and the maximum range of movement is ± 5mm. The maximum scale value is represented by scale value.
(11) swing choice: Use this knob to select the swing mode. There are five types of swing mode of the car. Except for the first one is the non -swing mode, the rest is as follows: