IP Unknown

MadeInChina.com > Electrical & Electronics > Breaker & Protector > Fuse

China Type 52A Thermal Actuators with Pulling Action Fusible Link

Price	$8.00 Compare
Min Order	1 Piece
Shipping From	Guangdong, China
Popularity	385 people viewed
Quantity	+-

JPCI Controls (Foshan Gaoming) Co.,Ltd

Audited Supplier 1 year

Profile Certified by SGS/BV

Guangdong, China
JPCI (Mr.)
Sales Director

Visit Homepage Product Catalog

Product Detail

Model NO.:

52A

Breaking Capacity:

High

Type:

Temperature Fuse

Usage:

Low Voltage

Fusing Speed:

FF

Standard:

VDE

Max Force:

15dan

Selling Units:

Single Item

Single Gross Weight:

0.060kg

Fusible Link Hole Distances (mm):

22-25mm

Material:

304 Stainless Steel

Trademark:

JPCI

Specification:

10X2X3cm

Origin:

China

Product Description

JPCI Type 58Z Miniature Type Breakable Glass Bulb Fire Detection Link

$3.00-5.00 / piece

5 pieces

These mechanical thermal actuators are intended to close the fire dampers used on the ventilation ducts. Their large operating force unlocks the spring actuating the damper. Requiring no power supply, these devices are particularly simple and reliable. They are mandatory for all fire dampers to meet the NF-S 61.937 standard. The force they develop is compatible with eutectic alloy fusible links with a soldering surface equal to or greater than 200mm² *. However, some local regulations may require periodic replacement of the fuse link or the thermal actuator.

Straight length (A) of the actuating rod before release: 30mm or 25mm (This length is given for a type 5EE fusible link with 23.8mm between holes axis, and varies proportionally to the fusible link holes axis distance) Stroke of the actuating rod when triggering: ≥ 20 mm Traction force of the actuating rod: ≥ 15 DaN (at the beginning of the stroke) Orientation of the actuating rod bending: Aligned with the axis of the fixing screw. Other possible orientations: every 15° angular (MOQ apply) Communication with the external environment: The mechanisms are equipped with a low leakage wall, separating the air of the ventilation duct from that of the external environment. Installation: Through the wall of the ventilation duct, with M4 screws or self-tapping screws of similar dimensions. See the metal sheet cutting drawing above. Body material: PA66 glass fiber reinforced, withstand temperature 200 C Mechanism material: Stainless steel Aisi 304 ROHS compliance: These mechanisms are ROHS compliant, but the conformity of the assembly when fitted with fusible links depends on the conformity of the fusible link (See the technical data sheets of the fusible links). Identification: Model and date of manufacture are stamped on each mechanism. When equipped with a fusible link, the link has its own identification (See the technical data sheets of the fusible links). Salt spray resistance: According to ISO 9227-2012, subjected to a mist formed of 20% by weight of sodium chloride in distilled water, at 35°C for 5 days (120h), the mechanisms retain their aptitude for the function. * The permanent mechanical strength of a eutectic fusible link depends on the soldering surface, but also on the composition of the alloy and the ambient temperature. See the limiting coefficients given in the technical introduction.

Summary of Thermally responsive devices for fire detection

Company profile:

Established in China since 2000, with French technology and investment, our company is proud to have more than 60 years experience in manufacturing electromechanical components and 30 years experience in manufacturing safety component for Spas, swimming pools and hot tubs. This experience, combined with high tech equipment and high tech raw materials let us develop the new components needed by rapid expansion of Asian and Chinese market.
In our new factory, on more than 8000 square meters production lines, we have two manufacturing divisions:
Division one is producing components:
Thermostats, energy regulators pressure switches, level switches, flow switches, fire detection fusible links, heating elements and ceramic connection blocks.
Division two is producing complete assemblies and sub assemblies on customer specifications:

Swimming pools heaters, heat pumps backup heaters, spas heaters, small water heaters, immersion heaters, aluminum foils heaters, baseboard and convection heaters sub assemblies
Our R&D team develops new products upon customer specification, taking care of international safety standard (UL, CE, etc.).
We produce our own stamping, bending, plastic injection, zinc alloy injection, and machining.
We are equipped with up to date automatic and CNC TIG welding and laser welding equipment and ultrasonic welding checking.
We have our own climatic room, corrosion testing loops, salt spray testing, and more than 30 specific equipments for products life testing.
Our income quality control laboratory is equipped to check raw material (plastics, metals) physical characteristics and dimensions.
Our finished product control laboratory has more than 200 machines to calibrate and check temperature, pressure, level and flow controls.
From the raw material to the finished product we control every production step. Meet your control equipment demand rapidly and safely is our consistent promises.

Basic Information

Product/Service Sell: Flow switches, level switch,pressure switch, thermostat,heating elements, back up heaters for heat pumps

Number of Employees:200 to 300 People
Main Markets:North America/South America/Eastern Europe/Southeast Asia/Africa/Oceania/Mid East/Eastern Asia/Western/Europe/Northern Europe/Southern Europe/Domestic Market

Total Annual Sales Volume: US$2.5 Million - US$5 Million

Domestic : China Heat Pump Exhibition ,Shanghai city , 15th-17th March every year

Oversea : It depends,normally in Europe,

Message Type
* Message Content
* Name
* Phone
* Email
* CAPTCHA