Audited Supplier
LX3122HF-IM-C380
CE
Four Column
Pressing
Automatic
800mm*600mm Max./750*400mm Max.
120mm Max. /180mmmax.
40cycles/Min Max.
0.2-2mm
800mm Max.
PP PS Pet PVC BOPS
0.7MPa
Container, Clamshell ,Tray and Lid
Forming, Cutting, Stacking and Conveying
13 Liters/Min 15° - 20°c
LXPLASTICS
Plastic Film with Anti-Rust Oil
1200*2600*2500mm
China
8477409000
Product Description
 |
BRIEF
HF-IM chinese cheap pressure and vacuum forming machine is a trim-in-place type thermoforming machine which takes advantage of mould with rules steel knife for performing forming and cutting in the same station. and the second and the third cut-station are available for performing fuction of post-trim and hole-punch.it is perfect for making part of PP PET PS etc and completely automatically produces disposable rectangular or square or round shaped roll-edged containers and trays with forming, trimming, and stacking conveying on one operation cycle.
Design Feature
chinese cheap pressure and vacuum forming machine Use Steel-Rule-knife for performing forming and cutting in the same stationTrim-in-place for processing PP PET PS PVC BOPS material etc. specially perfect for PP .
Second cut-press and Third cut-press are available for hole punching and post-trim
Automatic stacking ,counting unit and conveying system
Trim-in-place for parts with rolled edge (turn-down lip)
Technology of trim-in-place brings a neat and identical trimming(cutting)
Plug assistant for deep forming of draw
Floating knife and free knife are available for post-trimming film with high shrinkage rate.
Extra Contact Heat plate for Minimizing power consumption is available.
| Specification | LX3122IM |
| Mould Area | 800*600mm Max |
| Depth of Draw under sheet | 120 mm Max |
| Depth of Draw above sheet | 30mm Max/120mm Max |
| Clamping force | 750KN |
| The Second Cut-Press | Available |
| The third Cut-Press | Available |
| Suitable material | PP PET PS PVC BOPS |
| Sheet Width | 460- 850 mm |
| Material Thickness Range | 0.2-1.5mm |
| Material Roll Diameter | 1000 Max |
| Dry run Speed | 45cycles/min Max. |
| Power Supply | 3-N AC380V±15V ,(others at request) |
| Power Consumption | Approx.35kilowatts/hr |
| Air Pressure | 0.7Mpa |
| Air Consumption | 2500 Liters/min |
| Cooling Water Consumption | 13 Liters/min 15° - 20°C |
| Dimensions | 9.5m*2.2m*2.2(L*W*H) |
| Trim-in-place IM-2in1 |
 |
| Trim-in-place with second cut-press IM-3in1 (optional) |
 |
| Trim-in-place with second cut-press and third cut-press IM-4in1 (optional) |
 |
| Service |
 |
 |
