Audited Supplier
BF216-11
ISO
Vertical
Industrial
Electric Holding Furnace
Ceramic Sintering
Electric
Air
600*600*600mm
Ltcc Substrates Bbo and Sintering Process
Chitherm
Wooden Package
1520*1520*2250mm
China
8514101000
Product Description
1. Application
This equipment is mainly designed for LTCC sintering, it can also be used for binder burning out and sintering process of other relevant electrical products.
2.Technical Specification:
- Rated Temperature: 850ºC
- Max. Temperature:1000ºC
- Chamber Dimensions: 600mm×600mm×600mm(D×W×H)
- Effective Dimensions: 400mm×400mm×400mm(D×W×H)
- Chamber Insulation Material: Aluminosilicate Ceramic Fiber
- Heating Elements: Resistance Coils in Ceramic Fiber Block
- Thermcouple: Type K
- Temperature Control Point: 4 Points
- Pre-Heating: 4 Inlets
- 3 Stages Pre-Filtering of air: 1- dust, 2 - water drops, 3 - oil vapor
- Temperature Control Precision≤ ±1ºC
- Temperature Control Mode: Temperature controller imported from Japan
- Heating-up Steps: Default 20 Steps
- Temperature Record: IPC makes a real-time sampling record of the chamber temperature and the gas heating temperature
- Heat-up Rate ≤6ºC/min
- Chamber Temperature Uniformity:400mm×400mm×400mm (D×W×H) area is better than ± 3ºC
- Furnace Surface Temperature ≤ RT+35ºC
- Lift System: the equipment lifting operation system adopts three-point control, automated hearth extension,which can be stopped at any time, with stable and reliable operation
- Maximum Lifting Trip: 800mm
- Loading Weight ≤ 150Kg ( including products and setters )
- Total Power: 52kW ( Max Heating Power:40kW, Max Gas Preheating Power:4×3kW )
- Outline Dimensions: 1520×1520×2250mm(D×W×H)
- Weight: about 1000kg
3.Shipping List| Item | Description | Qty | |
| Basic Components | Furnace | 1SET | |
| inspection certificate | Certificate of major outsourced components | 1SET | |
| Technical Documents | Instructions, technical documents of the major outsourced parts, etc | 1SET | |
| Key Components | Heating Elements | Resistance Coils Heating Plate | 1SET |
| Flowmeter | Azbil/Dwyer/TOFCO/YINHUAN | 1SET | |
| Differential Pressure | Dwyer/TOFCO/DUWEI | 1SET | |
| Thermocouple | Watlow/THERMOWAY | 1SET | |
| Lifting System | Customized | 1SET | |
| Temp. Controller | Azbil | 1SET | |
| PLC | SIEMENS | 1SET | |
| Touch Screen | MCGS ( based on Linux) | 1SET | |
| Spare Parts | Solid State Relay | XIMADEN | 1PC |
| Heating Elements | Resistance Coils Heating Plate | 1 PC |
4. Facility Requirements
- Atmosphere Conditions: dry, clean, oil-free compressed air, working pressure of 0.2- 0.4MPa, gas consumption of 25-70 m3/h
- Environmental Conditions: temperature: 0~40ºC, humidity≤80%RH, no corrosive gas, no strong airflow disturbance
- Ventilation System: non-contact access to the user pumping system, pumping capacity is greater than 100 m3/h
- Ground Requirements: horizontal, no obvious vibration, load-bearing>500 kg/m2;
- Power: capacity> 70KVA, 3-phases 5-lines, voltage 220 / 380V, frequency 50Hz. Fire line: yellow, green, red, Zero line: blue, Ground line: yellow-green;
- Installation Site:3500mm×3000mm×3000mm(D×W×H), with an installation area greater than 11m2.
