C9300L-24T-4G-E
Full-Duplex & Half-Duplex
Ethernet Switch
10/100/1000Mbps
24
32000 Entries
Upoe
128gbps
Technical Support
10gbase-T
Layer 3
AC 120/230 V
24 X 10/100/1000 + 4 X Gigabit SFP (Uplink)
AC 120/230 V (50 - 60 Hz)
Network Essential
9198 Bytes
Rack-Mountable
Cisco
Pack in Carton
44.5 cm*45 cm*4.45 cm/7.02kg
China
8517623290
Product Description

Cisco switch part number :C9300L-24T-4G-E
The Cisco Catalyst 9300 Series switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At up to 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density Wi-Fi 6 and 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch.
The Catalyst 9300 Series is designed for Cisco StackWise technology, providing flexible deployment with support for nonstop forwarding with Stateful Switchover (NSF/SSO), for the most resilient architecture in a stackable (sub-50-ms) solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence.

Product Description | Cisco Catalyst 9300L - Network Essentials - switch - 24 ports - Managed - rack-mountable |
Device Type | Switch - 24 ports - L3 - Managed - stackable |
Enclosure Type | Rack-mountable |
Subtype | Gigabit Ethernet |
Ports | 24 x 10/100/1000 + 4 x Gigabit SFP (uplink) |
Performance | Switching capacity: 56 Gbps Stacking bandwidth: 320 Gbps Switching capacity with stacking: 376 Gbps Forwarding rate: 41.66 Mpps Forwarding rate with stacking: 279.76 Mpps |
Capacity | IPv4 routes: 32000 IPv6 routes: 16000 Multicast scale: 8000 QoS scale entries: 5120 ACL scale entries: 5120 VLANs supported: 4094 FNF entries: 64000 Switched virtual interfaces (SVIs): 1000 Packet buffer size: 16 MB Virtual networks: 64 |
MAC Address Table Size | 32000 entries |
Jumbo Frame Support | 9198 bytes |
Routing Protocol | OSPF, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, EIGRP for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng, MSTP |
Remote Management Protocol | SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF, gRPC, IPv4, IPv6, YANG |
Features | Access Control List (ACL) support, Quality of Service (QoS), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), PXE support, Energy Efficient Ethernet, Class of Service (CoS), Flexible NetFlow (FNF), 802.1x authentication, DiffServ Code Point (DSCP) support, MACsec support, Control plane protection (CoPP), Blue Beacon LED, Zero-touch provisioning (ZTP), secure boot, Protocol Independent Multicast (PIM), First Hop Security (FHS), PVLAN support, Committed Information Rate (CIR), Cisco Trust Anchor module, Cisco Unified Access Data Plane (UADP) 2.0, Cisco StackWise-320 technology |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae, IEEE 1588v2, IEEE 802.1BA, Wi-Fi CERTIFIED 6 |
Power | AC 120/230 V (50 - 60 Hz) |
Power Redundancy | Optional |
Dimensions (WxDxH) | 44.5 cm x 4.4 cm x 40.9 cm |
Weight | 6.78 kg |
Manufacturer Warranty | one year warranty |



1. All products are sealed in Cisco original box.
2. We will also pack them with another Carton box before shipping.
3. Professional packaging to make sure the goods arriving safely.
4. Goods will be shipped out the same day once the order confirmed.
5. We have cooperation with DHL, Fedex, Aramex, UPS, TNT, and other special line logistics.


FAQ
Q: Is your product original?
A: Yes, all the products is original CISCO package,new in box. we only do original goods.
Q: What's the payment terms?
A: You can pay by T/T, Western Union,Paypal, Alibaba Trade Assurance order
Q: How to ship the product to me?
A: We can ship goods by DHL,FedEx,TNT,UPS,EMS,ARAMEX within 1 day, usually 2-3days to destination.
Q: What is the warranty?
A: We can provide 1 year warranty, if goods have quality problem within warranty time,we will undertake charges.
______________________________________________________________________________________________________
Contact us:
Contact name: Frank Cui
Company name:Beijing Skylink TechnologyCo.,Ltd.
Address :Room910,Unit 1,Tower3,Pearl River Moore Building,ChangPing District,Beijing .