KS-AC100 is a medium-sized enterprise gateway based on MOTT protocol, with below specials:
- Equipped with 5 Gigabit RJ45 port, support multiple WAN ports, WAN port load balancing, multi operator access, Ethernet backup and Network overlay, Strategic routing etc...
- Support smart QoS, Internet behavior management, network firewall, VPN, SD-LAN, IPv6, VLAN, remote access control and management.
- Maximum 200 end users to access Ethernet, provide high speed network, protect against network storm, ensure the normal operation of the network.
- Deploy to network, it can be used as the main router or bypass AC controller; Centrally to configure 128PCS AP at the same time; Then the administrator can remote monitor, manage and maintain this network after project acceptance, greatly saves the human and material cost.
- KS-AC200 support multiple authentication like SMS auth, Radius billing auth, portal auth, account auth, no auth... to realize advertising, promotional or notifications...
- KS-AC200 can work with indoor & outdoor wireless AP, which are widely used in Enterprise, Village, Hotel, Shopping mall, School, Hospital...
1. Industrial gateway
1.1 KS-AC100 support PPPoE/DHCP/Static IP access, work with different ISP Ethernet access.
1.2 Support multiple Gigabit WAN ports, support load balancing, Ethernet backup, Network overlay, provide users with a more stable and faster network.
1.3 KS-AC100 support policy routing based on IP address, MAC address, network interface, domain name and other rules.
2. VPN client and VPN server support
KS-AC100 support multiple VPN protocol: L2TP/PPTP/IPSec/OpeVPN
Support VPN working diagram: site to site and client to site
Support access control based certificate, support sub certificates generation and distribution
3.Multiple authentication
KS-AC100 support multiple authentication, such as SMS auth, account auth, phone number auth, 3rd party Radius billing; Portal auth... Meet with medium to large network coverage authentication, advertisement, promotion or notification requirements.
4. Cloud management and SD-LAN support
4.1 KS-AC100 support cloud access for remote management and SD-LAN function; Very easy to manage this controller and connected wireless AP;
4.2 KS-AC100 support SD-LAN
SD-LAN is a Local area network (LAN) built around the principles of software-defined networking;
There are key differences in topology, network security, application visibility and control, management and quality of service; Centralized cloud-based network management, it bring specific benefits of adaptability, flexibility, cost-effectiveness, and scales to wired and wireless access networks.
Add a zero configuration group before access the wireless AP, then the wireless AP will automatically get the corresponding configuration from this group, simple and convenient; Administrator can add different group in the whole network, all wireless AP can obtain the configuration from this groups.
5.2 Intelligent channel analyzer
KS-AC100 is built intelligent channel analyzer, wireless AP can detect and analyze the Wi-Fi channels, greatly help wireless AP to select the channel with least interference and achieve the most stable wireless coverage effect.
5.3 Automatically assign IP address to wireless AP
KS-AC100 has a built-in DHCP server, which automatically assigns IP addresses to wireless AP, avoids the IP address conflicts, saves labor configuration costs.
Model | KS-AC100 |
Protocol | IEEE 802.3, 802.3u, 802.3ab TCP/IP, DHCP, ICMP, NAT, PPPoE, SNTP, HTTP, DDNS, IPsec, PPTP, L2TP,CAPWAP |
CPU | MT7621 |
DDR3 | 512MB |
Flash | 16M |
Heat Dissipate | Super silent ball fan |
Ports | 4 × 10/100/1000Mbps LAN ports (can set to WAN port) |
1 × 10/100/1000Mbps WAN port | |
Power | AC:100-240V,50HZ |
Dimension | 440mm*240mm*44mm |
Working Temperature | -20ºC~55ºC |
Storage Temperature | -40ºC ~ 70ºC |
Working Humidity | 5% ~ 97%RH (No condensation) |
Firmware features | |
AP Management | Max to access and manage 200 users |
Max to manage 128PCS wireless AP | |
Centrally and remotely to manage/configure wireless AP | |
User's status checking | |
Smart Flow Control | No-configuration intelligent flow control |
Powerful multi-line diversion | |
Application Priority Automatically | |
Load Balance | Multiple WAN, multiple ISP network access |
Intelligence load balance | |
Ethernet line backup | |
Ethernet overlay | |
Policy routing: based on IP address, destination IP address, source MAC address, network port, domain, destination port, Extranet port, Identity binding | |
Protocol binding | |
Online detection | |
Routing | Static Routing |
Behavior Management | All-round to block P2P firmware |
P2P flow control and bandwidth allot | |
File and URL filter | |
Monitor network behavior at all times | |
VPN | L2TP, PPTP, OpenVPN, IPSec |
Bandwidth limitation | IP-based bandwidth limitation |
Safeguard / Restrict bandwidth | |
Time strategy | |
IP based session restriction | |
Security Center | MAC address filter |
UPR/key words filter | |
Web content filter | |
IP address filter | |
Port mapping | |
DMZ | |
Defense Center | TCP/UDP/ICMP flood defense |
Block TCP scanning | |
Block ping WAN port | |
ARP Detection | Send GARP packets |
ARP Scanning on WAN/LAN port | |
Online detection | |
IP-MAC binding | |
Authentication | Portal auth; 3rd Radius billing auth; Account auth, SMS auth; No auth... |
Management | Web/CLI/Telnet management |
Remote management | |
Others | DDNS, VPN management |
Content | KS-AC200 *1 |
Power Cord *1 | |
Installation Accessory | |
QIG*1 |
Carton box: 51.5*42.5*30cm;
5PCS/CTN,
15.2KGS/CTN
1. OEM & ODM manufacturer with R&D team and factory together. Manufacturer is located in Shenzhen city;
2. Produced some products in India and Vietnam already, can support production in other countries;
3. Professional engineer and sales teams, 10+ years experience, faster and skilled communication to save time;
1. Two years warranty as product with branded components, such as Qualcomm/MTK chipset, Winbond flash, Nanya DDR, Skyworks PA...
2. Online technical support always.
3. On-site technical support;
1. MOQ:
If no brand, the MOQ can be 100PCS;
If branded, then MOQ should be 1000PCS;
Can be 500PCS also, but extra OEM fee will be added;
2. Samples:
Samples available before mass production;
But will charge sample fee and shipping fee.
If samples can't pass the testing as Quality default, we can return the sample fee and shipping fee
3. SKD and CKD
We can support SKD and CKD;
But if no professional SMT/DIP/RF calibration experience, we suggest to do SKD;
4. Long term business
We are not one-time business partner;
Most of our customers are cooperated with 10 years experience;
A supplier with stable and longer-life time product, faster and response communication will save too much for you.