8011 3105
8011 3105
0.12-0.26 mm
H14 H24
Less Than 2%
Decorations, Caps
ASTM, GB, EN
Cold Drawn
O - H112
Coated
Alloy
Sliver, Golden, Red, etc
8000 Series
Signi Aluminium
Wooden Case
sheet
Zhengzhou China
76061190
Product Description
Coated Aluminum sheet for PP Caps 8011 3105
Aluminum Caps sheet is rolled to very fine tolerances to yield more closure per tonne of stock and to allow uninterrupted operation of high-speed, multiple-cavity presses. Such closure sheet its strength, high formability, low Earring and printable surfaces make it ideal for pilfer-proof caps and vial seals.
Aluminum cap sheet from Signi assure long storage periods without any deterioration of the product. With suitable removal torque and high quality multicolour printing, its ROPP Closures are aesthetically unique and technically user friendly, perfect for re-sealability.
The broad categories of ROPP closures can be defined as Plain Printed Caps, Top Embossed Caps, Knurl Embossed Chamfered Caps, Side Embossed Chamfered Caps, Deep Drawn Caps, Extra Deep Drawn Side dry offset printed caps etc.


Aluminum Caps sheet is rolled to very fine tolerances to yield more closure per tonne of stock and to allow uninterrupted operation of high-speed, multiple-cavity presses. Such closure sheet its strength, high formability, low Earring and printable surfaces make it ideal for pilfer-proof caps and vial seals.
Aluminum cap sheet from Signi assure long storage periods without any deterioration of the product. With suitable removal torque and high quality multicolour printing, its ROPP Closures are aesthetically unique and technically user friendly, perfect for re-sealability.
The broad categories of ROPP closures can be defined as Plain Printed Caps, Top Embossed Caps, Knurl Embossed Chamfered Caps, Side Embossed Chamfered Caps, Deep Drawn Caps, Extra Deep Drawn Side dry offset printed caps etc.

Signi aluminum supplies aluminum sheet and coils for the manufacture of bottle closures. Closure sheet applications range from screw caps for whiskey and other beverage bottles to aluminum closures for wine bottles. Aluminum - the ideal material for the production of bottle closures: is light weight is easily and economically recycled has superior barrier qualities has good formability offers a bright finish for decoration. |
Aluminum Cap sheet Dimensions | |||
Parameter | Range | Standard | Tolerance |
Thickness (mm) | 0.18 _ 0.25 | 0.18, 0.20 | +0.005/-0.005 |
Width (mm) | 50 _ 1250 | 813, 845, 833.8, 835 | +0.5, -0 |
Length (mm) | 400 _ 1000 | 655, 706 | +0.5, -0 |
Diagonal difference for sheet (mm) | 1 max | - | - |
Coil sizes (mm) | OD: 1450 max ID: 75, 150, 300, 508 | - | - |
Coil density (kg/mm) | 3.5 max | - | - |
Offer for thickness and width outside the range may be quoted on specific request |
Earing of Aluminum Cap sheet |
Typical value: < 2 per cent for > =0.18 mm thickness |
Aluminum Cap sheet Mechanical properties | ||||
Alloy (AA) | Temper | UTS (mpa) | % E (min) (at 50 mm gauge length) | |
Min | Max | |||
3105 | H14 | 150 | 200 | 1 |
8011 | O | 8.5 | 12 | 15 |
H14 | 125 | 170 | 1 | |
H24 | 125 | 160 | 1 |
Aluminum Cap sheet Chemical composition | ||
Alloy (%) | AA 3105 | AA 8011 |
Fe | 0.70 | 0.6 _ 1.0 |
Si | 0.60 | 0.5 _ 0.9 |
Mg | 0.20 _ 0.80 | 0.05 |
Mn | 0.3 _ 0.8 | 0.20 |
Cu | 0.30 | 0.10 |
Zn | 0.25 | 0.10 |
Ti | 0.10 | 0.08 |
Cr | 0.10 | 0.05 |
Each (others) | 0.05 | 0.05 |
Total (others) | 0.15 | 0.15 |
Al | Remaining | Remaining |
Single number indicates maximum content |

Aluminum Cap sheet Packing |
Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection. |
Alternatively, they are wrapped in a poly-laminated gunny or polythene, strapped with a hoop iron strap and clip and placed on a wooden pallet. Edge guards are used and the sheets are wrapped with protective thermocol sheets. |
Coil: Coil is placed on wooden pallets in either eye-to-sky or eye-to-wall condition, wrapped in HDPE fabric and hardboard, and strapped with hoop iron. Silica gel packets are used for moisture protection. |
