Audited Supplier
Product parameters
Annual production capacity: Production volume is not less than 100 thousand tons.Staff work hours: two-shift (12 hours): night-time and day-time.
Material: low-carbon and low-alloy steel with the strength category of 235-590 МPa (yield strength from 255 to 590 MPa, tensile strength from 380 to 700 Mpa, elongation from 19%) made of hot rolled strip (slit coil).
Steel grades planned to be used for the production of high frequency current welded H-beam:
| No. | Strength class (examples of steel grades) | Thickness, mm | Yield strength, МPа | Tensile strength, MPa | Elongation, % |
| 1 | С255(Ст3пс5, Ст3сп5) | 4.0 - 20.0 | 255 - 390 | 380 - 500 | 25 |
| 2 | С345(09Г2С, 17Г1СУ, 10ХНДП) | 4.0 - 20.0 | 345 - 480 | 490 - 610 | 21 |
| 3 | С375(12Г2С, 15ХСНД) | 4.0 - 20.0 | 375 - 510 | 510 - 630 | 20 |
| 4 | С390(10ХСНД) | 4.0 - 20.0 | 390 - 530 | 520 - 640 | 20 |
| 5 | С440(16Г2АФ) | 4.0 - 20.0 | 440 - 580 | 540 - 660 | 20 |
| 6 | Powerweld 420 | 4.0 - 20.0 | 420 - 580 | 480 - 640 | 19 |
| 7 | Powerweld 460 | 8.0 - 20.0 | 460 - 590 | 570 - 690 | 20 |
Product: Steel welded H-beams according to GOST R 58966-2020, welded with high frequency currents, the height of 147-450 mm, width of flanges of 80-350 mm and thickness of web and flanges within the range from 4 to 16 mm (optionally up to 20 mm thick).
| No. | High frequency current welded H-beam (beam height x beam width x web thickness x flange thickness), mm | Hourly output not less than, t | Output 225000 per year, t |
| 1 | 147х149х6х10 | 20.0 | 10000 |
| 2 | 150х150х8х10 | ||
| 3 | 155х151х8х14 | ||
| 4 | 160х152х10х16 | ||
| 5 | 200х100х4х4 | ||
| 6 | 200х100х4х5 | ||
| 7 | 220х100х4х6 | ||
| 8 | 240х120х5х5 | 20.0 | 20000 |
| 9 | 200х100х6х8 | ||
| 10 | 240х120х6х6 | ||
| 11 | 203х101х8х10 | ||
| 12 | 240х130х6х8 | ||
| 13 | 208х102х8х12 | ||
| 14 | 196х199х8х10 | ||
| 15 | 200х200х8х12 | ||
| 16 | 204х201х10х14 | ||
| 17 | 250х200х4х4 | ||
| 18 | 190х149х6х8 | ||
| 19 | 250х200х4х5 | ||
| 20 | 194х150х6х10 | ||
| 21 | 199х151х8х12 | ||
| 22 | 250х200х5х8 | ||
| 23 | 204х152х10х14 | ||
| 24 | 250х200х6х8 | ||
| 25 | 250х200х8х12 | ||
| 26 | 270х200х8х14 | ||
| 27 | 270х200х10х16 | ||
| 28 | 300х150х5х5 | 20.0 | 20000 |
| 29 | 248х124х6х8 | ||
| 30 | 300х150х5х6 | ||
| 31 | 250х125х6х10 | ||
| 32 | 300х150х6х8 | ||
| 33 | 255х126х8х12 | ||
| 34 | 300х150х6х10 | ||
| 35 | 260х127х10х14 | ||
| 36 | 246х249х8х12 | ||
| 37 | 250х250х10х14 | ||
| 38 | 253х251х10х16 | ||
| 39 | 240х174х6х10 | ||
| 40 | 300х220х4х6 | ||
| 41 | 300х220х5х8 | ||
| 42 | 244х175х8х12 | ||
| 43 | 300х220х6х10 | ||
| 44 | 249х176х10х14 | ||
| 45 | 300х220х8х12 | ||
| 46 | 330х230х8х14 | ||
| 47 | 330х230х10х16 | ||
| 48 | 350х200х5х5 | 20.0 | 20000 |
| 49 | 298х149х6х8 | ||
| 50 | 350х200х5х6 | ||
| 51 | 350х200х6х8 | ||
| 52 | 305х151х8х12 | ||
| 53 | 350х200х6х10 | ||
| 54 | 310х152х10х14 | ||
| 55 | 298х299х10х14 | ||
| 56 | 300х300х10х16 | ||
| 57 | 300х305х14х16 | ||
| 58 | 290х199х8х10 | ||
| 59 | 350х250х5х7 | ||
| 60 | 294х200х8х12 | ||
| 61 | 350х250х6х8 | ||
| 62 | 350х250х8х10 | ||
| 63 | 300х201х10х16 | ||
| 64 | 350х250х10х12 | ||
| 65 | 350х250х10х16 | ||
| 66 | 400х210х6х6 | 20.0 | 20000 |
| 67 | 346х174х6х10 | ||
| 68 | 400х210х6х8 | ||
| 69 | 350х175х8х12 | ||
| 70 | 400х250х8х8 | ||
| 71 | 355х176х10х14 | ||
| 72 | 400х250х8х10 | ||
| 73 | 342х348х10х16 | ||
| 74 | 334х249х8х12 | ||
| 75 | 400х300х6х8 | ||
| 76 | 340х250х10х14 | ||
| 77 | 400х300х8х10 | ||
| 78 | 400х300х10х12 | ||
| 79 | 400х300х12х15 | ||
| 80 | 400х350х14х16 |
MACHINE LIST
| Model | Diameter(mm) | Wall THickness(mm) | Speed(m/min) | main power(kw) | HF power(kw) |
| HG12 | 7-16 | 0.2-0.6 | 20-120 | 30*1 | 100 |
| HG16 | 8-25 | 0.2-1 | 20-120 | 37*1 | 100 |
| HG25 | 8-32 | 0.8-1.3 | 20-120 | 45*1 | 100 |
| HG28 | 8-42 | 0.3-1.8 | 20-120 | 75/90*1 | 150 |
| HG32 | 16-50.8 | 0.6-2 | 20-120 | 110/132*1 | 150 |
| HG45 | 19-50.8 | 0.7-2.5 | 20-120 | 132*1 | 150 |
| HG50 | 19-63.5 | 0.7-2.5 | 20-120 | 132*1 | 200 |
| HG50(E) | 19-76 | 0.7-2.5 | 20-120 | 160*1 | 200 |
| HG60 | 19-76 | 0.8-3 | 20-100 | 185*1 | 250 |
| HG76 | 25-80 | 1.2-4 | 20-70 | 200*1 | 300 |
| HG76(E) | 32-127 | 1.2-3 | 20-90 | 132*2 | 300 |
| HG90 | 30-90 | 1.5-4.5 | 20-60 | 110*2 | 400 |
| HG115 | 38-115 | 2-5 | 20-60 | 160*2 | 400 |
| HG165 | 60-165 | 2-6 | 15-50 | 200*2 | 500 |
| HG219 | 90*219 | 3-8 | 15-50 | 250*2 | 600 |
| HG273 | 165-273 | 4-10 | 15-40 | 250*1 165*2 | 800 |
| HG365 | 219-365 | 4-12 | 15-30 | 250*2 200*2 | 1200 |
| .... | .... | .... | .... | .... | .... |
1.) We will send the engineer for the installation and training your workers how to operate this machine in correct way.
2.) Warranty Team
One year quality guarantee, life guarantee repair. Within quality guarantee period, except for failures caused by human error, repair parts will be provided for free. After the quality guarantee period, only charge the cost of the spare parts.
3.) We supply the pre-sell and after-sell service.
pre-sell service: workshop design, and production output design
after-sell service: installation and training, and the skilled engineer for working.
4.) We can also sent the engineer working for you serval months or 1 year. The engineer will help you to improve the output, reduce the waste and decrease the cost.
5.) We supply the pre-sell service-Design for whole project for stainless steel pipe making/ carbon steel pipe making.
6.) We will be responsible for the loading and shipping .
Q1: Are you manufacturer or trading company?
A1: we are manufactuer , more than 20 years experience.
Q2: What is the max size of pipe you have even produce?
A2: Max φ630mm
Q3:Can I visit your customer machine line?
A3: Yes, but I need to get agreement from my customer firslty.
Q4: what is your machine advantages?
A4:Contain Full automatic, Direct forming square, Share rollers. Fast change system
Q5:How I can get the quotation?
A5:Please send your requires of pipe size , thickness to us.
