Audited Supplier
End Caps
Black
IP68
EPDM Rubber
Cold Shrink
IP68
Available
Available
1kv
HarshMet
Carton Box
25/35/55/90
China
Product Description
EPDM Cold Shrink End Cap
The cold shrink end caps protect cables, pipes and other cylindrical objects from exposure to moisture, contamination, corrosion, ozone, ultra-violet radiation, physical contact and other environmental hazards.
1. Fast and simple installation. Don't need tool, don't need mastic or tapes.
2. Four sizes for your selection to cover a wide cable or pipe range from 11.6mm to 84.3mm.
3. EPDM rubber material, good abrasion resistance.
4. Seal tight, IP68 waterproof rate.
5. Resists acids and alkalis, and ozone.
6. Easy to remove.
| Item No. | Inner Diameter | Application Range (inch) | Application Range (mm) |
| CS-EC1 | 25mm | 0.46-0.82 | 11~20 |
| CS-EC2 | 35mm | 0.63-1.18 | 15~30 |
| CS-EC3 | 55mm | 1.02-1.94 | 26~49 |
| CS-EC4 | 90mm | 1.79-3.32 | 45~84 |
Typical Physical Properties of cold shrink end caps
| Properties | Test Method | Standard Value |
| 300% Modulus | ASTM D-412-75 | 4.2 MPa |
| Ultimate Tensile | ASTM D-412-75 | 10.05 MPa |
| Ultimate Elongation | ASTM D-412-75 | 600% |
| Tear Resistance | ASTM D-624C-73 | 28.3KN/m |
| Fungus Resistance | ASTM G-21 | 28 days exposure No Growth |
| Moisture Absorption 7 days at 90ºC in H2O | 3.0% wt.Gain |
HarshMet CS-EC series cold shrink end caps CS-EC1, CS-EC2, CS-EC3, CS-EC4. They are similar as and equivalent to3M EC series cold shrink end caps, EC-1, EC-2, EC-3, EC-4.
