ALR68
All Life
5 Years
Chiller
Galvanized Sheet
Ultrahigh
380/400 VAC
Low
Mechanical Engineering
Floor Standing
10~15 years
ISO, CE, CCC
New
R410A, R134A, R22
50Hz/60Hz
Plywood or Stretch Film Packing
8.5ton to 40 Ton
ALK or OEM brand
Palletizing
size: 2000mm*1000mm*1960mm
Qingdao China
84186920
Product Description
AIR COOLED MODULAR CHILLER UNIT
AIR COOLED MODULAR SCROLL CHILLER FEATURES
STRUCTURE
The master module can work independently or together with up to 11 slave modules, cooling capacity from 30 to 136kW.
HERMETIC COMPRESSOR
3-phase scroll type compressor, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers.
AXIAL FAN
External rotor type axial fans, equipped with three phase direct drive motors, large diameter fan with low speed, low noise 8 poles, protection level IP55,F class provided with a protective outlet grille.
EVAPORATOR
Evaporator built with high efficiency plate type or shell and tube heat exchanger, factory insulated with flexible close cell material.
CONDENSER
Condenser built with seamless internal screw thread copper tubes mechanically expanded into blue wave hydrophilic aluminum fins.
REFRIGERANT CIRCUIT
Refrigerant circuit complete with charge valves, filter drier, sight glass, gas-liquid separator, thermostatic expansion valve, high & low pressure switch. The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve.
HYDRAULIC CIRCUIT
Hydraulic circuit built with galvanized pipe, complete with water discharge connection for heat exchanger and flange type hydraulic connectors in two directions easy for connections from both sides of the units.
ELECTRIC PANEL
Electric panel consist of: Compressor contactor, fan motor contactor, compressor protection breaker, fan protection breaker, phase sequence relay and microprocessor with function display (display only for master/packaged unit)
Automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.
CHILLER Unit Pictures


TECHNICAL DATA



SOME PROJECT LIST
Cooling Capacity 30 ~ 136kW / 8.5 ~ 40 Ton
Power supply optional 380V/50HZ/3PH;230V/60HZ/3PH;460V/60HZ/3PHAIR COOLED MODULAR SCROLL CHILLER FEATURES
STRUCTURE
The master module can work independently or together with up to 11 slave modules, cooling capacity from 30 to 136kW.
HERMETIC COMPRESSOR
3-phase scroll type compressor, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers.
AXIAL FAN
External rotor type axial fans, equipped with three phase direct drive motors, large diameter fan with low speed, low noise 8 poles, protection level IP55,F class provided with a protective outlet grille.
EVAPORATOR
Evaporator built with high efficiency plate type or shell and tube heat exchanger, factory insulated with flexible close cell material.
CONDENSER
Condenser built with seamless internal screw thread copper tubes mechanically expanded into blue wave hydrophilic aluminum fins.
REFRIGERANT CIRCUIT
Refrigerant circuit complete with charge valves, filter drier, sight glass, gas-liquid separator, thermostatic expansion valve, high & low pressure switch. The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve.
HYDRAULIC CIRCUIT
Hydraulic circuit built with galvanized pipe, complete with water discharge connection for heat exchanger and flange type hydraulic connectors in two directions easy for connections from both sides of the units.
ELECTRIC PANEL
Electric panel consist of: Compressor contactor, fan motor contactor, compressor protection breaker, fan protection breaker, phase sequence relay and microprocessor with function display (display only for master/packaged unit)
Automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.
CHILLER Unit Pictures


TECHNICAL DATA



SOME PROJECT LIST
PROJECT TIME | EQUIPMENTS QUANTITY | PROJECT LOCATION |
2018 | 1000 UNITS | FOR TOTAL SALSE PROJECTS |
2019 | 1500 UNITS | FOR TOTAL PROJECTS |
2020 | 800 UNITS | FOR TOTAL SALSE PROJECTS |