Compact Drying Oven for Small Scale Laboratory Use

Price $5000.00 Compare
Min Order 1 Piece
Shipping From Jiangsu, China
Popularity 482 people viewed
Quantity
+-
 

Changzhou Weituo Pharmaceutical and Chemical Machinery Co., Ltd.

VIP   Audited Supplier 1 year
Profile Certified by SGS/BV
CHG
Free Spare Parts Exchange
1 Year
Combined
Gas Atomization
Contra-Flow
Transmission
Powder, Solution, Cream, Strap, Bulk
Inactive Gas, Superheated Steam, Effluent Gas, Air
Atmospheric Pressure
Continuous
WEITUO
Wooden Case
1880x 1640x2200MM
Changzhou
8419399090
Product Description

 
Product Description

Descriptions
The air steam passes through the surface of raw material only in traditional level
chamber drier,The disadvantage is that the coefficient of heat transfer is low and the utilization factor is poor and the drying time so long. Moreover because Of the defect of structure, it can not be in conformity with the requirements of "GMP", In order to overcome the shortcoming,we designed and developed the penetrating air stream box type drier on the basis of absorbing abroad advanced technology. The principle of work is shown in the figure listed below: The fresh air is sucked through fan and then filterd through primary,secondary and high efficiency. Therefore the purification reaches to one hundred thousand grades. Through steam heat exchanger, the temperature of air is raised to certain temperature. The heated air is purified through filter again and then flows to every layer through left glow divider. It makes the hot air pass through the raw material to be dried evenly. The damp air is sucked from the inclined air channel under the drying tray. Pans of damp air are exhausted out off the oven through centrifuge fan and the other is circled and heated still. In this way the purpose can be realized.
Applications

Applications

 

Product Parameters

Because the hot air of each circle is filtered through sub-high or high efficiency filter, it can avoid effectively that the carried raw material in the air is deteriouated and polluted during the period of re-circle and re-heating. It is in conformity with the requirements of " GMP" fully. Compared with laminar flow type oven, the dry capacity is higher. The thickness of raw material to be dried is more than three times, the dry area is large and the efficiency is high, Compared with level flow type oven, the capacity is more than 3-6 times. The cost is lower. lt is suitable for all kinds of raw materials having the shape of granule of block drying. lt is easy in operation and quick in clean and exchange and low in trouble. There are air filters at inlet and outlet. The raw material to be dried can not be polluted and the quality of raw materials to be dried can not be damaged. The heat source may be steam or electric heater.

Sketch of model CHG-l oven



Sketch of model CHG-Il oven

 

Technical parameters
Model & size Dry amount
each time
(kg)

Equipped
Power
(kw)
 Steam
consume

Area of heat
(
)

Amount of air
(m²/h)
Temperature difference
betwee
up and low °C

Size of
drying tray
Quantity of drying trayOverall
dimensions
Weight
(kg)
CHG-C-I100440-80504000-7300±2550×610×80101880×1640×22002200
CHG-C-II2005.580-120807200-15800±2550×610×80202620×1640×22004000

Application
Materialsdyestuffpharmceuticacatalystresinproduct of kilnaminoacid
capacitylkg)20026037035100200
initial mosisture(kg)6065/353150
finial mosisture(%)0.30.5/1032
grayity(kg/l)0.560.50.920.80.510.5
temperature(ºC)60804005010080
drying time(h)56/340 
drying area(m)6.55.84.60.636.66.8
heatsourcestreamstreamairstreamelectrical powerstream
Company Profile

 



 
 
Certifications

Project Cases

Exhibitions

FAQ

Q1: What is the equipment price?
A1: The equipment price is determined according to the product size, product characteristics and product material.

Q2: What is the packaging method?
A2: Naked packaging and wooden box packaging, damage compensation

Q3: What is the temperature range?
A3: The temperature range is 50-270 degrees and can be controlled

Q4: What is the heating method?
A4: There are many heating methods, such as steam, hot air, electric heating, natural gas, etc.

Q5: How long does it take to deliver?
A5: Within 15 days at the earliest

Q6: What does your after-sales service include?
A6: Our afer-sales service includes
(a) Equipment installation and commissioning
After the equipment is completed and the buyer's installation and commissioning notice is received, the supplier will immediately send personnel to install and commission the equipment.
(b) Operator training
Since the equipment is installed and commissioned, the buyer's operators will learn the working principles of the equipment and the maintenance elements during the operation process under the guidance of the supplier's after-sales service personnel, master the theoretical and practical experience of using the equipment, and produce qualified products.
(c) Equipment warranty
The equipment warranty period is one year. The supplier will provide free repairs for any equipment failure caused by manufacturing quality during the warranty period.
(d) Technical service
The supplier will provide free technical consultation for any technical problems encountered during use.
(e) Equipment maintenance after the warranty period
If there is any problem with the equipment after the warranty period, the supplier will provide high-quality maintenance services and original accessories at a unified preferential price.
(f) Service commitment
All door-to-door services will arrive in the most timely manner.
(g) After-sales service spare parts inventory guarantee
The supplier has sufficient spare parts and will send them out within 4 hours according to user needs.

Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA