Audited Supplier
concrete hardner
Silicates
Clear
Room Temperature Curing
Moisture-proof
Cement Hardner
Yes
grcc
22kg, 220kg, 1.2mt IBC
solution
Shanghai
2839900090
Product Description
1, PRODUCT DESCRIPTION
The lithium silicate formulation of Harden 510 creates greater density by reacting with the calcium hydroxide in the concrete to form stable, insoluble tri--calcium silica structures. This superior densification process ensures maximum resistance to dusting, abrasion, bacteria, and chemical attack.
Harden 510 Is sprayed evenly over the area to be treated--there is no need to flush the surface or remove and dispose of any excess material after installation. Treated Surfaces not only maintain their sheen against traffic and wear, but over time increases from a satin to glossy finish with regular maintenance. The most durable product of its kind, Harden 510 Gives long--term protection in a single application, dramatically reducing maintenance costs and facility downtime.
USE
Harden 510 Is designed for interior or exterior use on new or existing concrete, Including tilt--‐up construction slabs. Its many industrial and commercial applications include warehouses, manufacturing facilities, food processing plants, parking garages, distribution centers, retail stores, hospitals, sports & Entertainment venues, convention centers, office complexes, cafeterias, showrooms, transportation terminals, schools, and correctional facilities.
ADVANTAGES
Lithium Technology-allows deeper penetration and a more complete chemical reaction for maximum sealing/hardening/densification
Maximum Resistance To dusting & abrasion
No Flushing-material is simply sprayed evenly over the surface with no flushing or removal of excess material
Durable-one-time installation provides long-lasting protection
Fast-Drying-dries in 10 minutes, open to traffic in 30 minutes
Light-Reflective-provides immediate sheen that improves over time with normal wear and maintenance
Lower Potential for Efflorescence than sodium-based treatments
Stable In All Environmental Conditions-eliminates expansion/contraction caused by ASR in sodium silicates
Low-Maintenance Surface-minimal downtime and maintenance costs
Environmentally Safe-low VOCs(<50g/L), odorless
PHYSICAL PROPERTIES
APPLICATION RECOMMENDATIONS/COVERAGE RATE
The use of a Certified Applicator is required for all national accounts. Please see separate application instruction document for complete application information. Harden 510 may be applied by HPLV, pump-up, airless, backpack, or mechanical sprayer; roller or brush at approximately 400-500sq/ft per gallon (10--‐12m2/liter). Rate will vary depending on surface porosity.
SHELF LIFE
Harden 510 may be stored for up to one year in unopened, factory-sealed container under normal storage conditions of 5ºC-40ºC.
Lithium silicate indexes
2, Packing
Liquid: 300kg plastic drums/iron drums, 1.2-1.4mt IBC, 24-27mt FLEXITANK or as clients' demands
3, Delivery way
by sea, by air, by rail way, by truck
4, Usage
A, Used in glass system, molten salt system and high temperature ceramic glaze, also used in steel and other surface rust coating.
B, Used as adhesive, mainly for inorganic zinc-rich coatings and advanced electrode
5, FAQ
A, Factory or trading company
we are the factory and also the agent of some factory have no exporting right;
We are the factory and OEM, if your quantity is big enough, we could produce the lithium silicate as clients' demands.
B, If could provide the free samples
The new clients, 0-1kg samples are free, but the clients need to pay the express charge;
Old clients, we could provide 0-1kg free samples, including the express charge
C, The validity of goods
2years
D, Documents
We usually provide the BL, Commercial Invoice, Packing List, COA for free, if need other documents, kindly let us know, we see if need to increase the costs, thanks very much.
E, Our markets
50% used for local markets
50% used for abroad markets(Middle east, Southeast Asia, South Asia, North America, Central and South America, South America, ect.)
F, Other products
We also produce the potassium silicate, potassium sodium silicate, lithium silicate, calcium formate, potassium sulphate, concrete hardner, concrete waterproofing agent, concrete sealer, concrete reparing agent, ect.
The lithium silicate formulation of Harden 510 creates greater density by reacting with the calcium hydroxide in the concrete to form stable, insoluble tri--calcium silica structures. This superior densification process ensures maximum resistance to dusting, abrasion, bacteria, and chemical attack.
Harden 510 Is sprayed evenly over the area to be treated--there is no need to flush the surface or remove and dispose of any excess material after installation. Treated Surfaces not only maintain their sheen against traffic and wear, but over time increases from a satin to glossy finish with regular maintenance. The most durable product of its kind, Harden 510 Gives long--term protection in a single application, dramatically reducing maintenance costs and facility downtime.
USE
Harden 510 Is designed for interior or exterior use on new or existing concrete, Including tilt--‐up construction slabs. Its many industrial and commercial applications include warehouses, manufacturing facilities, food processing plants, parking garages, distribution centers, retail stores, hospitals, sports & Entertainment venues, convention centers, office complexes, cafeterias, showrooms, transportation terminals, schools, and correctional facilities.
ADVANTAGES
Lithium Technology-allows deeper penetration and a more complete chemical reaction for maximum sealing/hardening/densification
Maximum Resistance To dusting & abrasion
No Flushing-material is simply sprayed evenly over the surface with no flushing or removal of excess material
Durable-one-time installation provides long-lasting protection
Fast-Drying-dries in 10 minutes, open to traffic in 30 minutes
Light-Reflective-provides immediate sheen that improves over time with normal wear and maintenance
Lower Potential for Efflorescence than sodium-based treatments
Stable In All Environmental Conditions-eliminates expansion/contraction caused by ASR in sodium silicates
Low-Maintenance Surface-minimal downtime and maintenance costs
Environmentally Safe-low VOCs(<50g/L), odorless
PHYSICAL PROPERTIES
| Form: | Clear, pale, water-based solution |
| Specific Gravity: | 1.08 |
| PH | 11 |
| Active Ingredients: | 100% |
| Total Solids: | 9% |
| VOC Content: | 0g/L |
| Slip Resistance | Does not change floor friction coefficient |
APPLICATION RECOMMENDATIONS/COVERAGE RATE
The use of a Certified Applicator is required for all national accounts. Please see separate application instruction document for complete application information. Harden 510 may be applied by HPLV, pump-up, airless, backpack, or mechanical sprayer; roller or brush at approximately 400-500sq/ft per gallon (10--‐12m2/liter). Rate will vary depending on surface porosity.
SHELF LIFE
Harden 510 may be stored for up to one year in unopened, factory-sealed container under normal storage conditions of 5ºC-40ºC.
Lithium silicate indexes
| Lithium silicate | |
| Items | Standard |
| MR | 4.8±0.1 |
| SiO2 % | 20.0±1.0 |
| Li2O % | 2.1±0.1 |
| Solid content % | 22.1±1 |
| Density(25ºC) | 1.16-1.19 |
| PH | 11.5±0.5 |
| Viscosity(25ºC) mpa.s | 5-20 |
| Appearance | colorless or slightly colored viscous liquid |
2, Packing
Liquid: 300kg plastic drums/iron drums, 1.2-1.4mt IBC, 24-27mt FLEXITANK or as clients' demands
3, Delivery way
by sea, by air, by rail way, by truck
4, Usage
A, Used in glass system, molten salt system and high temperature ceramic glaze, also used in steel and other surface rust coating.
B, Used as adhesive, mainly for inorganic zinc-rich coatings and advanced electrode
5, FAQ
A, Factory or trading company
we are the factory and also the agent of some factory have no exporting right;
We are the factory and OEM, if your quantity is big enough, we could produce the lithium silicate as clients' demands.
B, If could provide the free samples
The new clients, 0-1kg samples are free, but the clients need to pay the express charge;
Old clients, we could provide 0-1kg free samples, including the express charge
C, The validity of goods
2years
D, Documents
We usually provide the BL, Commercial Invoice, Packing List, COA for free, if need other documents, kindly let us know, we see if need to increase the costs, thanks very much.
E, Our markets
50% used for local markets
50% used for abroad markets(Middle east, Southeast Asia, South Asia, North America, Central and South America, South America, ect.)
F, Other products
We also produce the potassium silicate, potassium sodium silicate, lithium silicate, calcium formate, potassium sulphate, concrete hardner, concrete waterproofing agent, concrete sealer, concrete reparing agent, ect.
