Copper Tube Aluminum Fin Air Cooled Chiller Heat Exchanger Evaporator Condenser Coil for Replacement

Vrcoolertech condenser coils and evaporator coils are used in a wide variety of HVAC heat recovery and condensing applications. 

Our condenser coils come with a huge selection of tube, fin and material options including 5/16" OD copper tubing. 
Standard and custom designs are available for new and retrofit installations. 

Carrier, Trane, McQuay, York/JCI, and Heatcraft are all manufacturers that we can easily duplicate often at a fraction of the cost of a new coil from the OEM and twice as fast. 
Our sales engineers will walk you through matching existing coil dimensions & construction to create a condenser coil that you can slide out the old one and slide the new one right in. 

Application: gas compression, HVAC, transit cooling, refrigerated display cases, data center & electronics cooling, and ground support.


Below are some comments from our clients:

Material:

 

FINS

The fins, made of aluminium, prevarnished aluminium or copper, are pressed by means of a particular ondulation that increases the thermal exchange between the air and the fin reducing the load losses on the air side and encouraging at the same time the flow of condensation or defrosting water. The fins can also be made from 316L stainless steel for installations where the thermal exchange is in aggressive environments such as the food sector or exchangers used in salty environments. The main geometries, achievable according to the chosen material, are reported following below; besides, according to the application chosen by the customer and to the thickness of the requested strap, it will be possible to make a major or minor pitch between the fins.
 

TUBES

We make tubes of different diameters, with a greater number of thicknesses and different materials such as copper, stainless steel and cupronickel. The tube expansion, during the flaring phase, allows a perfect contact between the tubes and the fins and as a consequence it assures efficient thermal exchange.

PLATES

Thanks to its accurate three-dimensional design and to modern punchers and numerical control bending machines, it is possible to make carpentry and structures of different sizes that can be adapted to any construction requirement of the customer.

We have customized products for many customers, following are some projects we did before.

We can provide designing data and prodcution drawings.

We promise we use the design software sold by a well-known European HAVC software company. Through 8 years of cooperation with them, we have designed, processed and exported dry coolers to various countries all around the world.
All of customers feedback is that the actual cooling performance is almost the same as the theoretical design value.

The normal package is wooden box. If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.

Lead Time: 20 - 40 days 
Payment Terms: 50% T/T payment in advance, 50% T/T payment before delivery
Packing Condition: Standard export packing or customized packaging

We specialize in designing, manufacturing and exporting refrigeration equipments for the varied industries since 2004.

When it comes to building heat exchanger for any application VRCOOLERTECH Company has the capability to meet your requirements. If you need a heat exchanger using water, steam, refrigerant, glycol, ammonia, CO2 or any other medium, Vrcooler can build it for you. We build heat exchanger for replacement of existing heat exchanger or for new jobs, as well. We make standard copper tube / aluminum fin commercial heat exchanger and we build heavy industrial heat exchanger for process applications. You will be hard-pressed to come up with a job we can't handle.

Our main products:
Tube and Fin Heat Exchanger
Finned Tube Heat Exchanger
Dry cooler
Unit cooler
Air Compressor Cooler
Charge Air Cooler
Generator Cooler