Audited Supplier
I.Introduction
Factory direct sales PE film extrusion machinery SL55+55-1300 is used to produce three-layers co-extrusion film.
Extrusion system adopts two extruders and one three-layers co-extrusion die to blow
plastic film, the surface and bottom layer share an extruder, we call it A. The production of another extruder is the middle layer of the film, we call it B, so the blown film forms A, B, A three-layers co-extrusion film
II.Main Technical Parameters
Main Technical Parameters
| Model | Film blowing machine |
| Co-extrusion layer | Three layers |
| Suitable Material | HDPE/ LDPE/recycling material |
| Max Film Width | 1200mm |
| Film Thickness | HDPE:0.01mm-0.1mm |
| Output | 80~120kg/H |
| Total Power | About 70KW |
| Dimension( L×W×H) | 6800mm×2800mm×6000mm |
| Weight | About 5500KGS |
| Auto-loader | Include |
| Filter device | High Speed Mechanics Screen Changer, |
| Corona treatment | Include |
| Hot slitter | One set |
Extrusion &Die &Air-Ring Device
| Screw Diameter | A 55mm+B 55mm |
| Screw L/D Ratio | 30:1 |
| Screw Barrel Material | High speed type, 38CrMoAl,surface with nitride, with special mixed segment, screw processing by the double metal |
| Die-Head Diameter | Φ120mm HDPE Die mould one set type |
| Die head type | 360 degree rotary die |
| Die-Head Material | 45 forge steel,the mould inside andthe die surface were deal with hard chrome and electronic polish treatment, ensure good quality film |
| Big Air-Ring for height 6m | One set One set special for blowing HDPE type |
| Temperature Controlling System | Digital Intelligent Temperature Controlling System with solid state relay control, Delixi Brand |
| Thermo Control Zone of Barrel | 6 Zones |
| Thermo Control Zone of Take over | 2 Zones |
| Thermo Control Zone of Die | 2 Zones |
| Main Motor Power | A 22KW+B22KW, Siemens Beide Motor |
| Blower motor Power | 5.5KW |
| Gear Box | 2 pcs Guo Mao Brand High strength hard tooth surface reduction gear box, has a large carrying capacity, low noise, long life, stable transmission, etc |
| Heater | Ceramic heater complete set for screw and barrel and die head |
Take-Up Device
| Width of Take-Up Roller | 1300mm |
| Take-up Speed | 0-70m/min |
| Take-up traction Motor and inverter Power | 2.2KW |
| Embossing roller | Include |
Rewind Device
| Rewind Roller Width | 1300mm |
| Max.Rewind Diameter | Φ500mm |
| Rewind Type | PLC Control automatic roller change system, double winding with air shaft and with side slitter |
III.Option parts
| No | Option parts |
| 1 | Auto loader |
| 2. | gram control system |
| 3 | Rotary die |
| 4 | Auto film width controller |
| 5 | Air compressor |
| 6 | Auto voltage regulator |
| 7 | Manual high speed filter changer |
| 9 | Corona treatment |
| 10 | Double rewind |
Machine Features:
- Enhancing properties like moisture resistance, oil resistance, and stain resistance of paper.
- Increasing the strength and durability of paper.
- Improving paper's printability for better printing results.
- Adjustable film thickness and laminating speed to meet various requirements.
Applications:
Jiangyin Honghua Machinery and Equipment Co., Ltd is Established in 1984, our company specializes in the manufacturing of Extrusion coating machines. The product range includes PET Coating Machines, Aluminum Foil Coating Machines, Paper Coating Machines, Heat Sublimation Release Paper Coating Machines, Polyester Silicone Paper Coating Machines, Rustproof Paper Coating Machines, Non-Woven Fabric Coating Machines, Felt Fabric Coating Machines, Sterile Packaging Paper Aluminum Laminating Machines, Paper Printing Coating Machines, and more. Additionally, we produce equipment such as Film Blowing Machines, Hot Laminating Machines, and various complementary devices for production lines. With decades of expertise, we are committed to delivering high-quality coating and laminating solutions for diverse industrial applications.
Our company has established more than 30 years, and always make the market requirements as our guider, the clients' satisfaction as our rule, the self-innovation as our develop method, the improvement of our competitive poweras our target. Warmly welcome new and old customers from home and abroad to visit our company, and establish friendly and cooperative business relationship.
Support and Services:
Technical Support and Service for Release Paper Extrusion Lamination Machine
On-site maintenance and repair services.
Remote diagnostics and troubleshooting.
Software updates and upgrades.
Replacement parts and accessories.
Technical advice and guidance.
Q1:Why should buy from us not from other suppliers?We are famous and professional blown film machines factory from China.
A1:we have very well experiences can ensure our machine is quality controlled and reliable. we also have our own CNC center for making die head for machine.
Q2:What is the general delivery time of blown film machines?
A2:The production of a blown film machine usually takes about 30 to 60 working days, depending on the size and configuration of the machine.
Q3:How long is the warranty period of blown film machines?
A3lAll our blown film machines have a one-year warranty, starting from the date of machine arrives at customer's factory and finished commissioning. During this period, we will provide a fully free warranty for the whole machine, except consumables.
Q4:Can I visit the blown film machine production plant and watch the commissioning process?
A4:Of course you can. we welcome you to visit us at any time. We will pick you up at Wenzhou Longwan Airport or Rui'an Railway Station.
Q5:What kind of after-sales service do you provide if the blown film machines encounter technical problems or partdamage?
A5:We will remotely communicate with you via video to tell you how to solve technical problems of blown film machines. If the problem can't resolve, we will send engineer to your factory. If the damaged part (non-consumable part) is within the warranty period, we will provide you with another one free of charge, with the transportation charges paid by our factory.
Q6: What is the payment method for blown film machine orders?
A6:We will start production when we received the 30% deposit of the order. After we finished the production and received the last 70% payment, we will arrange shipment and send machine to customer.
