Audited Supplier
| Track end disc diameter | φ1000 mm |
| Track speed | 3.5 rpm |
| Single piece weight for cleaning workpieces | 30kg |
| Maximum loading capacity of drum (easily flipped parts) | 600kg |
| Productivity | 2000-2500kg/h |
| Shot blaster Q034 | (1) Quantity 1 (2) Impeller diameter 4420mm (3) Blade width 80mm (4) Shot blasting capacity 250 kg/min (5) Shot blaster power 15 kW |
| Track transmission mechanism | (1) Transmission speed 0.1m/s (2) Motor power 4kW |
| Elevator | (1) Increase by 15T/h (2) Power 2.2kW |
| separator | (1) Separation capacity of 15T/h (2) Required air volume 1500m3/h |
| Hanging door | (1) Walking speed 180mm/s (2) Motor power 0.75kW |
| Bottom spiral | (1) Conveying capacity of 15T/h |
| Feeding machine | (1) Maximum load capacity 600kg (2) Motor power 3kw |
QR3210 automatic feeding track type shot blasting machine can not only remove rust on the surface of workpieces, but also clean up various rust, dirt, etc. on workpieces, improving the surface quality of workpieces; At the same time, it can also improve the internal stress of the workpiece, achieve the purpose of strengthening, and enhance the fatigue strength of the workpiece. In order to remove rust, oxide skin and other debris from the surface of the vehicle body, and to achieve a certain roughness of the cleaned surface after cleaning, the adhesion between the paint film and the surface of the vehicle body is enhanced, thereby improving the corrosion resistance and surface quality of the vehicle body.
Characteristic
1. It can complete functions such as loading, rotating and flipping the workpiece for shot blasting cleaning, unloading, and dust removal;
2. The cantilever centrifugal shot blaster with high blasting speed produced by combining foreign technology can significantly improve cleaning efficiency and achieve satisfactory cleaning quality;
3. The arrangement of the shot blasting chamber and shot blasting device is determined through computer 3D dynamic shooting simulation, so that the coverage area of the ejected projectile flow accurately covers the surface of the workpiece, and the projectile is simultaneously thrown towards the surface of the workpiece from all directions;
4. The machine has a novel design concept, a compact structure, and is easy to use and maintain;
5. Adopting the popular form of no pit, saving the construction cost of pit foundation;
Equipment composition and structural characteristics
This QR3210 automatic feeding track type shot blasting machine mainly consists of a cleaning room, rubber tracks, suspension doors, shot blasting machines, feeding mechanisms, elevators, screw conveyors, magnetic separation systems, dust removal systems, electrical systems, and other parts. This machine increases the amount of shot blasting, improves the ability and separation effect of the shot sand separation system. Usually, wind and magnetic separation methods are used, and the separated old sand can be directly reused.
Taizhou Chuzhou Electromechanical Equipment Co., Ltd. which is located in yuhuan city, Zhejiang Province . The company is a professional production, sales of brass valve sanitary ware machinery and equipment group company. We have 5 factories, mainly producing machines for copper valves sanitary ware products : automatic hot forging Trimming Machine , shot blasting machine, automatic polishing machine, automatic CNC machine tool, automatic assembly machine, whole line processing and testing equipment . We have a group of professional engineers in charge of technology, manufacture, installation and testing, so we can guarantee the good performance of our machines. We can provide customers with full service and technical consultation according to their different requirements . Cosmos company would like to offer the best machines, and build ourselves as the bridge and window for both overseas and domestic enterprises and customers. Products are exported to Russia, India, Iran, Turkey, United Arab Emirates, Vietnam, Uzbekistan, Saudi Arabia, Syria, Jordan, Indonesia, Singapore, Thailand, Pakistan, South Africa, Egypt, Nigeria, Kenya and other countries.
welcome to build business relations, cooperate and develop together with us. Please feel free to contact us for details.
Q1: Are you trading company or manufacturer ?
A1: We are factory.
Q2: What is the delivery time?
A2: 20-40 working day, based on factory's production order conditions.
Q3: How to installation machine?
A3: We supply overseas service, engineer can go to your place guide installation and debugging.
Q4: What size machine suit for us?
A4: We design machine following your request, usually based on your workpiece size, weight and efficiency.
Q5: How to control the quality?
A5: One year warranty,and 10 teams QC to check every part from drawing to machine finished.
