Audited Supplier
1,Machine tool structure features:
1),Overall high strength casting bed, three guide rail layout, guide rail surface high-frequency quenching, good rigidity, high precision. The bed saddle is on two guide rails, and the head, tail seat and center frame are on two guide rails. The machine is equipped with 2 support frames. Machine tool guide rail lubrication using centralized intermittent special lubrication pump lubrication, lubrication in time.
2), the milling head adopts servo spindle motor drive, can make the hob achieve stepless speed change, wide speed range. The milling head Angle is adjusted by worm gear and worm drive with variable tooth thickness, and the milling head is locked manually to ensure the stability of machining. The tool adjustment is manual.
3), feed axis [Z axis, X axis] using high precision ball screw through a wide number of servo motor direct drive, high transmission accuracy, good positioning accuracy.
4), headstock spindle C axis adopts wide number servo motor directly connected with high precision wear-resistant worm gear and worm pair (the worm gear and worm pair is variable tooth thickness, the backlash can be adjusted easily). Spindle aperture φ 130mm.
5), slide plate for dovetail guide rail, high position accuracy, good fast speed.
6), the spindle bearing is lubricated by oil, low temperature rise, high durability, and no daily lubrication maintenance.
7), the machine tail seat is mechanical, flexible and reliable.
8). The machine tool fixture is a clamping fixture (semi-arc), and the material is Cr12. Clamp can be manually adjusted in axial direction.
9), the machine is equipped with a wide range of control system.
10), the machine is equipped with chip discharging machine, the iron filings generated in the milling process directly into the chip discharging machine, to ensure the clean working environment.
11). The electrical components in the machine tool electrical control cabinet are delixi brand.
HXK150×6000 CNC spline milling machine main technical parameters:
| item | content | unit |
| Machine tool use | Rolling spline | |
| The length of the lathe bed | 7700 | mm |
| Bed width | 800 | mm |
| Bed guide rail type | Three guide | |
| Maximum machining diameter | Φ150 | mm |
| Minimum machining diameter | Φ20 | mm |
| Maximum workpiece length | 6000 | mm |
| Maximum machining modulus | 5 | mm |
| Maximum milling spline length | 5600 | mm |
| Milling head motor power | Servo spindle motor | KW |
| Milling head motor speed | 1500 | r/min |
| Milling head reduction ratio | 1:10 | reference |
| Milling head tool shaft diameter | Φ32 | mm |
| Headstock spindle through hole diameter | Φ130 | mm |
| Spindle diameter of tailstock | Φ130 | mm |
| Maximum stroke of tailstock sleeve | 150 | mm |
| Tailstock sleeve mounting taper hole | Morse # 6 | |
| Number of servo control shafts | Workpiece rotation (C-axis) | |
| Transverse saddle (Z axis) | ||
| Longitudinal slide (X axis) | ||
| Numerical control system | Four axis and three linkage | |
| C axis motor | 30 | Nm |
| C axis drive type | Worm gear and worm | domestic |
| C axis transmission ratio | 1:30 | |
| Maximum speed of axis C | 50 | r/min(CVT) |
| C axis positioning accuracy | 8 | Angle of seconds |
| C axis chuck specifications | K72-315-A28 | |
| X axis motor | 18 | Nm |
| X axis ball screw specifications | 5010 | domestic |
| X axis guide rail pair type | 55 ° dovetail | |
| X axis positioning accuracy | 0.02 | mm |
| The Z axis motor | 30 | Nm |
| Z axis ball screw specifications | 8010 | domestic |
| Z-axis bed saddle guide rail pair type | Mountain track + horizontal track | |
| Cooling water pump | High pressure water pump | 450W |
| Machine tool dimensions | 9500×1800×2100 | |
| Machine weight | ≈9.5 | ton |
FAQ:
Q1, How do I send my query?
You can contact us via email, phone, instant messaging (WhatsApp, wechat, Skype).
Q2,If you don't know which model is suitable for your company, please tell us your requirements for the equipment, or you can send us the product drawings, and our engineers can help you choose the most suitable model for you.
Q3,delivery time?
The project will be completed within 20 days after receiving the deposit. Please communicate with the sales staff about the specific construction period.
Q4,Payment Terms?
30% by T/T as down payment, balance 70% by T/T before delivery. If others payment terms, we can discuss.Welcome to inquiry sales.
Q5,Can your engineers come to help us install and debug the machine?
Yes, our engineers are available to travel to your place. Round flight tickets & accommodation will be at your cost.
Q6, If I can't know how to operate. Can your engineer help me programme well on machine?
Sure. You can provide your detailed sample drawing.engineer can programme well on machine. Or in some machines, we will put into U-disc of operation video to help you.
Q7What control system does the equipment use?
Our standard configuration is Guangzhou CNC system, fanuc and Siemens can also be used, but the price is slightly different, please contact sales for details.
