Audited Supplier
The series of dust-free ovens could achieve a 100-degree dust-free level in the chamber. It adopts a unique stainless steel structure, using dust-free materials inside the chamber. External wind passes through a high temperature resistant and efficient filter H E. P. A continuously purifies and filters the chamber environment to create a high cleanliness, uniform temperature, and dust-free high-temperature baking environment. It could achieve better cleaning results if paired with a dust-free workshop.
1.Intelligent temperature controller.
2.Available in Chinese and English menus to meet different language needs.
3.The height of the shelf is adjustable to meet different cultivation needs.
4.Professional foot design, saving lab space and improving the use efficiency.
5.Energy-saving design, low surface temperature of the oven.
Features
1.Adjustable dying time.
2.Air outlet with adjustable air volume.
3.Heating up fast, forced-airconvection, High dying efficiency.
4.Fully sealed inside, temperature rise fast, good terperature uniformity.
5.Automatic Air exchange and cooling.
Safety
1.Protection on ovens: All the components do meet international safety
standard.
2.Over-temperature alarm. When the heating is out of control or exceeds the max. limit temperature, the heating is automatically cut off with sound and light alarm, ensure operating safe without any accident.
Dust-free Oven/ Forced Air Oven
Technical Parameters
| No. | Item | Specification | ||
| 1 | Electric Power | 220V 50HZ 3.5KW | ||
| Output power | about 1600W (Constant output power after temperature stabilization) | |||
| 2 | Size | Inner Size: W450mm*D400mm*H400mm | ||
| Outer Size: W760mm*D910mm*H1130mm (For reference ) | ||||
| 3 | Temp. range | RT+15ºC to 200ºC | RT+15ºC to 300ºC | |
| 4 | Temp. uniformity | ±1.5%ºC | ±2%ºC | |
| 5 | Oven structure | 5.1 Single door design, the control box installed at the top of the machine. 5.2 Inner material: SUS # stainless steel sheet, Mirror surface, treatment with empirical soda water cleaning and degreasing, to avoid partial during drying. 5.3 Middle material: SUS # stainless steel sheet, Mirror surface, treatment with empirical soda water cleaning and degreasing, argon welding sealing processing. 5.4 Outer material: SS41# cold rolled sheet, treatment with empirical soda water cleaning and degreasing, argon welding sealing processing, white color. 5.5 Insulation layer: High-quality rock wool insulation cotton. 5.6 High-temperature resistance silicon sealing strip, environmental protection, and no pollution. 5.7 Using hidden door lock, easy to open and close. 5.8 With 2 pcs of stainless steel trays. | ||
| 6 | Temp. controller | 6.1 Using a 5-inch touch-screen controller, PID automatic calculation, SSR output, Temperature sensor, LED digital Setting & display. 6.2 With the function of Digital setting, cut-off temperature, constant temperature timer, over temperature alarm, and other functions. 6.3 With R232 communication port, equipped with data acquisition and temperature recording functions. | ||
| 7 | Control Method | SSR contactless signal output. | ||
| 8 | Circulatory system | 8.1 Horizontal Forced Hot Air Supply, special wind pathway design. 8.2 HEPE Filer : H.E.P.A.Filter36″×24″×5-7/8″ 8.3 Clean class level:100 degree 8.4 Exhaust port with diameter 3 inches, Cooling down by strong air circulation effect. | ||
| 9 | Heater | Using stainless sheathed heater dust-free electric heater. | ||
| 10 | Safety device | Leakage circuit breaker, Over temperature alarm, motor overcurrent protection, machine abnormal buzzer warning, buzzer alarm, etc. | ||
| 11 | Warranty | 1 year; If there is something wrong with the machine during working (any fault caused by non-artificial reasons), our company will provide the post-sale corresponding remote technical assistance lifelong. | ||
| 12 | Features | 1. Special air duct design, good heating rate, high quality of baked products. 2. Strong temperature stability and uniformity. 3. SSR output control, small temperature fluctuation. 4. Fully equipped with safety protection facilities and high safety performance. 5. Multi-layer heat insulation design, good sealing effect. 6. Clean Design, suitable for the dust-free workshop. | ||
| 13 | Installation | 1.Flat ground, good ventilation. 2 No strong vibration, no strong magnetic field around the machine. 3. At least 600mm away from the wall to install the machine. 4.No flammable, explosive, corrosive substance and dust around the machine. 5.Check the power and voltage before starting the machine. | ||
| 14 | Remark | OEM & ODM are available. | ||
Application
Widely used in precision electronic manufacturing, semiconductor wafer manufacturing, large-scale integrated circuits, biological manufacturing, clean laboratories, aerospace, and many other industrial fields.
To view more details, you can click product keywords...
| Vacuum oven | Non-dust oven | Tunnel dryer |
| Environmental test equipment | Mechanical accessories | Electronic accessories |
Q: Are you a trading company or manufacturer?
A: We are both a manufacturer and a trading company.
We have 20+ years of professional experience as an industrial drying equipment manufacturer. Our production factory covers an area of about 20000M2 and exports machines of 1500+ sets per year.
Q: Is OEM or ODM service available?
A: Most of the products are available for OEM / ODM customization.
Q: How about your service?
Pre-sales service:
24-hour online service for your consultation.
Help to choose the right model, as well as a series of services, personnel, and suggestions.
Intermediate service:
Give you the best quotation with suitable & convenient payment terms and methods.
Timely production and delivery, notify you promptly.
After-sales service:
Technical training: equipment operation, daily maintenance, and warranty, common fault diagnosis, and troubleshooting
Regular tour service: discover problems in advance and eliminate equipment and human hidden dangers in time.
Technical guidance: additional valuable special services can be provided according to the needs of users.
Q: When will make delivery?
A: Generally, the lead time for the stocked products is about 7~10 days, varying by models and production schedule. For those customized products, the manufacturing lead time is around 30~ 60 days.
Q: How about the quality of the goods?
A: Since the establishment of our company, relying on technology superiority, we aim at the domestic and international research & drying equipment market. We cooperate with a lot of big customers, such as Panasonic, Threebond, Hisilicon, Gree, HUAWEI, etc. Welcome to our company and watch our plant production condition any time.
Q: Transportation
A: Transported by DHL, UPS, EMS, FedEx, Air freight, sea freight, etc.
