Audited Supplier
We found that both silicon carbide and boron carbide ceramic plates have the characteristics of low density. The density of common alumina ceramics is about 3.5g/cm-3, while the densities of silicon carbide and boron carbide are only 3.2g/cm-3 and 2.5g/cm-3 respectively. It can be seen that under the trend of lightweight mobile, silicon carbide and boron carbide materials have inherent advantages. It's used as strikface material Silicon Carbide (SIC) has high hardness,light weight. Tt'd ideal in compromising weight and cost It is manufactured by hot-press sintering.or presureless sintering or reaction bonding processes Shapes can be square,hexagonal,cylindrical or disc-like etc.
1) Purity : | from 99% to 99.9% |
2) Types | Hexagon Tilesm, Rectangle Tiles, Curved Rectangle Tiles, Single Curved Plates |
3) Shapes available: | Square, hexagonal, cylinder, rectangle, single-curved plate, cut-angle tile and so on |
50*50mm; 100*100mm; 50*25mm; 100*50mm (specific sizes are also available) | |
Hex tile flat to flat 20mm,30mm,40mm | |
5)Material: | Alumina 99(99% Alumina) |
Sintered Silicon Carbide(SSiC) | |
Boron Carbide(B4C) | |
6) Hardness: | up to 1500 |
Properities | |
Density: | 3.05-3.15g/cm3 |
Porosity: | ≤0.1%Hardness |
HRV: | ≥ 20 Gpa |
Fracture Strength: | ≥ 320Mpa |
Elestic Modulus: | ≥360GpaFracture |
Toughness: | 2-3Mpa M1/2 |
Applied in machinery, metallurgy, electronics, chemical industry, iron and steel, ceramics, paper making, mineral processing,refractory industry, national defense and so on.
Features:
• Lighter weight and higher load capacity.
• Excellent distortion resistance at high temperature.
• High thermal conductivity• High Young's modulus
• Low thermal expansion coefficient
• Extremely high hardness
• Wear resistant
The prodeucts specifications are as follows: | ||||||
Product Appearance | Quadrilateral Pieces(mm) | Hexagonal Pieces(mm) (Across Flats) | Whole Plates with Single-Curved Surface(mm) | |||
Plane Sizes | 50*50 | 88 | 68 | 30 | 20 | 300*250 |
Thickness | 5-20mm | 6-10mm | ||||
Notes | Products can be produced according to customers' demands of particular sizes | |||||
Ceramic | Density | Mo Elastic modulus | Knoop hardness | Fracture toughness |
/(g·cm-3) | /GPa | /(MPa·m1/2) | ||
SIC | 3.2 | 350-450 | 2500 | 4.0-6.4 |
B4C | 2.5 | 400 | 2900 | 2.8-4.3 |
AL2O3 | 3.5 | 350 | 1800 | 2.8-4.5 |
1. 5-50 pieces in a wooden box (fully enclosed, safe, and secure)
2. 800kg~1000kg /wooden box.
3. Anti-collision protection such as foam board The 4.3-layer wood composite panel is sturdy, impact resistant, drop resistant
2.Both FOB and CIF can be operated flexibly.
3. Competitive sea freight and short transit time
Q:Are you a trading company or a manufacturer?
A:We are professional manufacturer which has almost 12 years of experience in this industry.
Q:Can you produce according to the samples?
A:Yes,we can produce by your samples or technical drawings.
Q:Would it be possible for us to visit your factory?
A:Sure,we welcomed our customers visit our factory in any time.
Q:Will your company supply samples?
A:Yes,the sample expense will be deducted from the value of your order.
Q:What's your payment terms?
A:T/T, L/C, Western Union, Money Gram, are available for us.
Q:Delivery time for my order?
A:Within 7-15 working days for your sample order; 20 working days for your bulk order( It depends on the models and quantity you are going to order)
