Audited Supplier
| Basic Information | Technical parameters of 20FT\40FT reefer container | |
| Name | Specification | |
| External Dimentions(mm) | 6058*2438*2896(L*W*H) | |
| Internal DImentions(mm) | 5818*2224*2576(L*W*H)) | |
| Container Technology | Foaming process | One-time foaming overall molding |
| Total heat transfer coefficient of housing | 0.4w/m³ | 0.4w/m³ |
| Thermal Insulation material/density | polyurethane 45kg/m³ | polyurethane 45kg/m³ |
| Bottom plate | thickness | 100mm/polyurethane |
| Floor material | 35mm/Aluminum profile (integrated welding) | |
| Dewatering hole | Two drainage holes at the front and the back, with rubber seal plugging | |
| Inner skin | Food grade ,Thermoplastic plate | |
| Lateral plate | thickness | 100mm/polyurethane |
| outer skin | Pre-coated white aluminum plate | |
| Inner skin | Food grade ,Thermoplastic plate | |
| Anti-colliosion plate | Pre-coated white aluminum plate | |
| Roof plate | thickness | 100mm/polyurethane |
| outer skin | Pre-coated white aluminum plate | |
| Inner skin | Food grade ,Thermoplastic plate | |
| Front plate | thickness | 100mm/polyurethane |
| outer skin | Pre-coated white aluminum plate | |
| Inner skin | Food grade ,Thermoplastic plate | |
| Front and rear frames | material | Carbon steel spray paint, with ISO standard corner |
| Rear door (split style) | thickness | Door lock part,Door hinge |
| outer skin | Pre-coated white aluminum plate | |
| Inner skin | Food grade ,Thermoplastic plate | |
| Door lock part | 2 sets of exposed carbon steel galvanized lock bars per door | |
| Door hinge | Aluminum alloy door hinges | |
| attachments | The roof is embedded | The top plate shall be embedded according to the requirements (hanging storage plate) |
| color of the container | white | |
20FT standard container type, 35-40 cubic meters of storage, made of all aluminumRiveted and carbon steel type, JSD6800/JSD7800 type refrigeration unit, 220V/380V power supply, intelligent frequency conversion energy-saving technology, remote control monitoring, Advantages are low consumption, energy saving, environmental protection, high structural strength of the box, thermal insulation performance High, high level of appearance.
High strength: Adopt T6 grade aluminum profile, high strength and high load bearing, unique double buckle process or riveting process, 35mm castle-type aluminum guide +300mml aluminum profile collision plate as standard configuration, 8 welding machine one-time full welding molding, high bearing and high sealing, easy cleaning and washing, to solve the defects of traditional nail installation aluminum floor 1,bottom nail seepage, Heat preservation decreased, self-weight increased; 2,Cleaning is not convenient, mixed with garbage stains, resulting in mold and odor in the car, odor is difficult to eliminate.
1. When the probe temperature on the ice plate reaches 8°C, the solenoid valve and the evaporative fan are turned on to utilize the pressure of the evaporative fan for rapid cooling, thereby stabilizing the temperature in the box. 2. When the probe temperature on the ice plate reaches 4°C or the box temperature reaches 0°C, either condition is met, and the solenoid valve and the evaporative fan are shut off, using the stored cold energy to maintain the box temperature.
| A1 Class Regenerative 40 FT Incubator | 45FT wood-electric integrated refrigerator | 40FT Shipping Container | ||
| External Dimentions | 12192*2438*2896mm | 13716*2438*2896mm | 12192*2438*2896mm | |
| Internal Dimentions | 11778*2238*2356mm | 12716*2294*2554mm | 11590*2294*2554mm | |
| Cubic | 62.1 | 74.5 | 67.9 | |
| Tare weight/Payload weight | 8.0/26.0 | 7.1/26.9 | 4.6/29.4 | |
| Volume-weight ratio | 2.39 | 2.77 | 2.31 | |
| Temperature control | Refrigeration mode | No power supply refrigeration | Comes with diesel power supply | Need power |
| Heat preservation without power supply | Does not affect the insulation aging and quality | <0.5days | ||
| Heat preservation timing | >3days | Oil and electricity can be continuous | ||
| Temperature control range | 5ºC--12ºC | -24ºC--4ºC | ||
FAQ (Frequently Asked Questions)
Q1: Are you trading company or manufacturer ?
A: Yes, we are factory, we have our own R&D team, injection workshop and strong mangement team.
Q2: Could you offer custom ocean shipping service?
A : Of course! HUWU have 12 years experience to arrange shipping . Good price and Best service from MSK, MSC, OOCL, HPL, EMC, etc.
Q3: What is the lead time?
A: If stock available, we can deliver goods within 7days. If no stock,that would be 20-25days after receiving deposit.
Q4: How to ensure the production quality?
A: First, our QC have inspection for the semi-manufactures and finished products. Inspection report,product photo and even pre-shipment samples can be offered. Second, you can employ the third party inspection organization to check the goods.
Q5: How about your price?
A. You will get the best price in China. The price is competitive over the world.
Q6: If the customer can visit factory?
A: Sure, we warmly welcome you to our factory and talk face to face for order details.
